For a better version of the sf vignettes see https://r-spatial.github.io/sf/articles/

This vignette describes the functions in sf that can help to plot knitr::opts_chunkset(fig.height = 4.5)knitr : : opts_chunkset(fig.width = 6) simple features. It tries to be complete about the plot methods sf provides, and give examples and pointers to options to plot simple feature objects with other packages (mapview, tmap, ggplot2).

Plot methods for `sf` and `sfc` objects

Geometry only: `sfc`

Geometry list-columns (objects of class sfc, obtained by the st_geometry method) only show the geometry:

library(sf)
demo(nc, ask = FALSE, echo = FALSE)
plot(st_geometry(nc))

which can be further annotated with colors, symbols, etc., as the usual base plots, e.g. points are added to a polygon plot by:

plot(st_geometry(nc), col = sf.colors(12, categorical = TRUE), border = 'grey', 
     axes = TRUE)
plot(st_geometry(st_centroid(nc)), pch = 3, col = 'red', add = TRUE)

## Warning: st_centroid assumes attributes are constant over geometries

and legends, titles and so on can be added afterwards. border = NA removes the polygon borders.

As can be seen, the axes plotted are sensitive to the CRS, and in case of longitude/latitude coordinates, degree symbols and orientation are added if axes = TRUE.

Geometry with attributes: `sf`

The default plot of an sf object is a multi-plot of all attributes, up to a reasonable maximum:

plot(nc)

## Warning: plotting the first 10 out of 14 attributes; use max.plot = 14 to plot
## all

with a warning when not all attributes can be reasonably plotted. One can increase the maximum number of maps to be plotted by

plot(nc, max.plot = 14)

The row/column layout is chosen such that the plotting area is maximally filled. The default value for max.plot can be controlled, e.g. by setting the global option sf_max.plot:

options(sf_max.plot=1)
plot(nc)

Color key place and size

In case a single attribute is selected, by default a color key is given the side of the plot where it leaves as much as possible room for the plotted map; for nc this is below:

plot(nc["AREA"])

but this can be controlled, and set to a particular side (1=below, 2=left, 3=above and 4=right):

plot(nc["AREA"], key.pos = 4)

The size of a color key can be controlled, using either relative units (a number between 0 and 1) or absolute units (like lcm(2) for 2 cm):

plot(nc["AREA"], key.pos = 1, axes = TRUE, key.width = lcm(1.3), key.length = 1.0)

Keys for factor variables are a bit different, as we typically don’t want to rotate text for them:

nc$f = cut(nc$AREA, 10)
plot(nc["f"], axes = TRUE, key.pos = 4, pal = sf.colors(10), key.width = lcm(5))

Class intervals

Color breaks (class intervals) can be controlled by plot arguments breaks and nbreaks. nbreaks specifies the number of breaks; breaks is either a vector with break values:

plot(nc["AREA"], breaks = c(0,.05,.1,.15,.2,.25))

or breaks is used to indicate a breaks-finding method that is passed as the style argument to classInt::classIntervals(). Its default value, pretty, results in rounded class breaks, and has as a side effect that nbreaks may be honoured only approximately. Other methods include "equal" to break the data range into "nbreaks" equal classes, "quantile" to use quantiles as class breaks, and "jenks", used in other software.

plot(nc["AREA"], breaks = "jenks")

How does `sf` project geographic coordinates?

Package sf plots projected maps in their native projection, meaning that easting and northing are mapped linearly to the x and y axis, keeping an aspect ratio of 1 (one unit east equals one unit north). For geographic data, where coordinates constitute degrees longitude and latitude, it chooses an equirectangular projection (also called equidistant circular), where at the center of the plot (or of the bounding box) one unit north equals one unit east.

Proj.4 also lets you project data to this projection, and the plot of

plot(st_geometry(nc), axes = TRUE)

should, apart from the values along axes, be otherwise identical to

lat_ts = mean(st_bbox(nc)[c(2,4)]) # latitude of true scale
eqc = st_transform(nc, paste0("+proj=eqc +lat_ts=", lat_ts))
plot(st_geometry(eqc), axes = TRUE)

Graticules

Graticules are grid lines along equal longitude (meridians) or latitude (parallels) that, depending on the projection used, often plot as curved lines on a map, giving it reference in terms of longitude and latitude. sf::st_graticule() tries to create a graticule grid for arbitrary maps. As there are infinitely many projections, there are most likely many cases where it does not succeed in doing this well, and examples of these are welcomed as sf issues.

The following plot shows a graticule geometry on itself,

library(maps)
usa = st_as_sf(map('usa', plot = FALSE, fill = TRUE))
laea = st_crs("+proj=laea +lat_0=30 +lon_0=-95") # Lambert equal area
usa <- st_transform(usa, laea)
g = st_graticule(usa)
plot(st_geometry(g), axes = TRUE)

where we see that the graticule does not reach the plot boundaries (but is cut off at the bounding box of usa), and that the axes show projected coordinates.

When we compute the graticule within the plotting function, we know the plotting region and can compute it up to the plot margins, and add axes in graticule units:

plot(usa, graticule = TRUE, key.pos = NULL, axes = TRUE)

We can also pass a crs object to graticule to obtain a graticule in a datum different from the default (WGS84). st_graticule() takes parameters, and we can pass an object returned by it to the graticule parameter of plot, to get finer control:

g = st_graticule(usa, lon = seq(-130,-65,5))
plot(usa, graticule = g, key.pos = NULL, axes = TRUE,
     xlim = st_bbox(usa)[c(1,3)], ylim = st_bbox(usa)[c(2,4)],
     xaxs = "i", yaxs = "i")

which still doesn’t look great – completely controlling the plotting region of base plots is not easy.

Plotting sf objects with other packages

grid: `st_as_grob`

Package sf provides a number of methods for st_as_grob():

methods(st_as_grob)

##  [1] st_as_grob.CIRCULARSTRING*      st_as_grob.COMPOUNDCURVE*      
##  [3] st_as_grob.CURVEPOLYGON*        st_as_grob.GEOMETRYCOLLECTION* 
##  [5] st_as_grob.LINESTRING*          st_as_grob.MULTILINESTRING*    
##  [7] st_as_grob.MULTIPOINT*          st_as_grob.MULTIPOLYGON*       
##  [9] st_as_grob.MULTISURFACE*        st_as_grob.POINT*              
## [11] st_as_grob.POLYGON*             st_as_grob.sfc*                
## [13] st_as_grob.sfc_CIRCULARSTRING*  st_as_grob.sfc_LINESTRING*     
## [15] st_as_grob.sfc_MULTILINESTRING* st_as_grob.sfc_MULTIPOINT*     
## [17] st_as_grob.sfc_MULTIPOLYGON*    st_as_grob.sfc_POINT*          
## [19] st_as_grob.sfc_POLYGON*        
## see '?methods' for accessing help and source code

which convert simple simple feature objects into grob (“graphics objects”) objects; grobs are the graphic primitives of the grid plotting package. These methods can be used by plotting packages that build on grid, such as ggplot2 (which uses them in geom_sf()) and tmap. In addition, st_viewport() can be used to set up a grid viewport from an sf object, with an aspect ratio similar to that of plot.sf().

ggplot2

contains a geom specially for simple feature objects, with support for graticule white lines in the background using sf::st_graticule(). Support is currently good for polygons; for lines or points, your mileage may vary.

library(ggplot2)
ggplot() + geom_sf(data = usa)

Polygons can be colored using aes:

ggplot() + 
  geom_sf(data = nc, aes(fill = BIR74)) + 
  scale_y_continuous(breaks = 34:36)

and sets of maps can be plotted as facet plots after rearranging the sf object, e.g. by

library(dplyr)
library(tidyr)
nc2 <- nc %>% select(SID74, SID79, geom) %>% gather(VAR, SID, -geom)
ggplot() + 
  geom_sf(data = nc2, aes(fill = SID)) + 
  facet_wrap(~VAR, ncol = 1) +
  scale_y_continuous(breaks = 34:36)

mapview

Package mapview creates interactive maps in html pages, using package leaflet as a workhorse. Extensive examples are found here.

An example is obtained by

library(mapview)
mapviewOptions(fgb = FALSE) # needed when creating web pages
mapview(nc["BIR74"], col.regions = sf.colors(10), fgb = FALSE)

gives a map which is interactive: you can zoom and pan, and query features by clicking on them.

tmap

Package tmap is another package for plotting maps, with emphasis on production-ready maps.

library(tmap)
qtm(nc)

tmap also has interactive leaflet maps:

tmap_mode("view")
tm_shape(nc) + tm_fill("BIR74", palette = sf.colors(5))

Replotting the last map in non-interactive mode is as simple as:

ttm()
tmap_last()

A draft version of the book Elegant and informative maps with tmap by Martijn Tennekes and Jakub Nowosad is found at https://r-tmap.github.io/

5. Plotting Simple Features

Plot methods for sf and sfc objects

Geometry only: sfc

Geometry with attributes: sf