Gram-Schmidt Orthogonalization and Regression

This vignette illustrates the process of transforming a set of variables to a new set of uncorrelated (orthogonal) variables. It carries out the Gram-Schmidt process directly by successively projecting each successive variable on the previous ones and subtracting (taking residuals). This is equivalent by replacing each successive variable by its residuals from a least squares regression on the previous variables.

When this method is used on the predictors in a regression problem, the resulting orthogonal variables have exactly the same anova() summary (based on “Type I”, sequential sums of squares) as do original variables.

Setup

We use the class data set, but convert the character factor sex to a dummy (0/1) variable male.

library(matlib)
data(class)
class$male <- as.numeric(class$sex=="M")

For later use in regression, we create a variable IQ as a response variable

class <- transform(class, 
                   IQ = round(20 + height + 3*age -.1*weight -3*male + 10*rnorm(nrow(class))))
head(class)
##         sex age height weight male  IQ
## Alfred    M  14   69.0  112.5    1 108
## Alice     F  13   56.5   84.0    0  96
## Barbara   F  13   65.3   98.0    0 105
## Carol     F  14   62.8  102.5    0 128
## Henry     M  14   63.5  102.5    1 110
## James     M  12   57.3   83.0    1  94

Reorder the predictors we want, forming a numeric matrix, X.

X <- as.matrix(class[,c(3,4,2,5)])
head(X)
##         height weight age male
## Alfred    69.0  112.5  14    1
## Alice     56.5   84.0  13    0
## Barbara   65.3   98.0  13    0
## Carol     62.8  102.5  14    0
## Henry     63.5  102.5  14    1
## James     57.3   83.0  12    1

Orthogonalization by projections

The Gram-Schmidt process treats the variables in a given order, according to the columns in X. We start with a new matrix Z consisting of X[,1]. Then, find a new variable Z[,2] orthogonal to Z[,1] by subtracting the projection of X[,2] on Z[,1].

Z <- cbind(X[,1], 0, 0, 0)
Z[,2] <- X[,2] - Proj(X[,2], Z[,1])
crossprod(Z[,1], Z[,2])     # verify orthogonality
##           [,1]
## [1,] 7.731e-12

Continue in the same way, subtracting the projections of X[,3] on the previous columns, and so forth

Z[,3] <- X[,3] - Proj(X[,3], Z[,1]) - Proj(X[,3], Z[,2]) 
Z[,4] <- X[,4] - Proj(X[,4], Z[,1]) - Proj(X[,4], Z[,2]) - Proj(X[,4], Z[,3])

Note that if any column of X is a linear combination of the previous columns, the corresponding column of Z will be all zeros.

These computations are similar to the following set of linear regressions:

z2 <- residuals(lm(X[,2] ~ X[,1]), type="response")
z3 <- residuals(lm(X[,3] ~ X[,1:2]), type="response")
z4 <- residuals(lm(X[,4] ~ X[,1:3]), type="response")

The columns of Z are now orthogonal, but not of unit length,

zapsmall(crossprod(Z))     # check orthogonality
##       [,1] [,2] [,3] [,4]
## [1,] 57888    0    0    0
## [2,]     0 3249    0    0
## [3,]     0    0    7    0
## [4,]     0    0    0    2

We make standardize column to unit length, giving Z as an orthonormal matrix, such that Z′Z = I.

Z <- Z %*% diag(1 / len(Z))    # make each column unit length
zapsmall(crossprod(Z))         # check orthonormal
##      [,1] [,2] [,3] [,4]
## [1,]    1    0    0    0
## [2,]    0    1    0    0
## [3,]    0    0    1    0
## [4,]    0    0    0    1
colnames(Z) <- colnames(X)

Relationship to QR factorization

The QR method uses essentially the same process, factoring the matrix X as X = QR, where Q is the orthonormal matrix corresponding to Z and R is an upper triangular matrix. However, the signs of the columns of Q are arbitrary, and QR() returns QR(X)$Q with signs reversed, compared to Z.

# same result as QR(X)$Q, but with signs reversed
head(Z, 5)
##         height   weight     age     male
## Alfred  0.2868  0.07545 -0.3687  0.12456
## Alice   0.2348 -0.08067  0.3569 -0.02177
## Barbara 0.2714 -0.07715 -0.3862 -0.45170
## Carol   0.2610  0.07058  0.1559 -0.20548
## Henry   0.2639  0.05132  0.1047  0.40538
head(-QR(X)$Q, 5)
##        [,1]     [,2]    [,3]     [,4]
## [1,] 0.2868  0.07545 -0.3687  0.12456
## [2,] 0.2348 -0.08067  0.3569 -0.02177
## [3,] 0.2714 -0.07715 -0.3862 -0.45170
## [4,] 0.2610  0.07058  0.1559 -0.20548
## [5,] 0.2639  0.05132  0.1047  0.40538
all.equal( unname(Z), -QR(X)$Q )
## [1] TRUE

Regression with X and Z

We carry out two regressions of IQ on the variables in X and in Z. These are equivalent, in the sense that

  • The R2 and MSE are the same in both models
  • Residuals are the same
  • The Type I tests given by anova() are the same.
class2 <- data.frame(Z, IQ=class$IQ)

Regression of IQ on the original variables in X

mod1 <- lm(IQ ~ height + weight + age + male, data=class)
anova(mod1)
## Analysis of Variance Table
## 
## Response: IQ
##           Df Sum Sq Mean Sq F value Pr(>F)  
## height     1    799     799    8.00  0.018 *
## weight     1      7       7    0.07  0.801  
## age        1    637     637    6.38  0.030 *
## male       1    296     296    2.96  0.116  
## Residuals 10    998     100                 
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

Regression of IQ on the orthogonalized variables in Z

mod2 <- lm(IQ ~ height + weight + age + male, data=class2)
anova(mod2)
## Analysis of Variance Table
## 
## Response: IQ
##           Df Sum Sq Mean Sq F value Pr(>F)  
## height     1    799     799    8.00  0.018 *
## weight     1      7       7    0.07  0.801  
## age        1    637     637    6.38  0.030 *
## male       1    296     296    2.96  0.116  
## Residuals 10    998     100                 
## ---
## Signif. codes:  0 '***' 0.001 '**' 0.01 '*' 0.05 '.' 0.1 ' ' 1

This illustrates that anova() tests for linear models are sequential tests. They test hypotheses about the extra contribution of each variable over and above all previous ones, in a given order. These usually do not make substantive sense, except in testing ordered (“hierarchical”) models.