Custom Print Methods

Before knitr v1.6, printing objects in R code chunks basically emulates the R console. For example, a data frame is printed like this^[Note R prints an object without an explicit print() call when it is visible; see ?invisible]:

head(mtcars)

                   mpg cyl disp  hp drat    wt  qsec vs am gear carb
Mazda RX4         21.0   6  160 110 3.90 2.620 16.46  0  1    4    4
Mazda RX4 Wag     21.0   6  160 110 3.90 2.875 17.02  0  1    4    4
Datsun 710        22.8   4  108  93 3.85 2.320 18.61  1  1    4    1
Hornet 4 Drive    21.4   6  258 110 3.08 3.215 19.44  1  0    3    1
Hornet Sportabout 18.7   8  360 175 3.15 3.440 17.02  0  0    3    2
Valiant           18.1   6  225 105 2.76 3.460 20.22  1  0    3    1

The text representation of the data frame above may look very familiar with most R users, but for reporting purposes, it may not be satisfactory – often times we want to see a table representation instead. That is the problem that the chunk option render and the S3 generic function knit_print() try to solve.

Customize Printing

After we evaluate each R expression in a code chunk, there is an object returned. For example, 1 + 1 returns 2. This object is passed to the chunk option render, which is a function with two arguments, x and options, or x and .... The default value for the render option is knit_print, an S3 function in knitr:

library(knitr)
knit_print  # an S3 generic function

## function (x, ...) 
## {
##     if (need_screenshot(x, ...)) {
##         html_screenshot(x)
##     }
##     else {
##         UseMethod("knit_print")
##     }
## }
## <bytecode: 0x562a52cbbf80>
## <environment: namespace:knitr>

methods(knit_print)

## [1] knit_print.default*       knit_print.knit_asis*    
## [3] knit_print.knit_asis_url* knit_print.knitr_kable*  
## see '?methods' for accessing help and source code

getS3method('knit_print', 'default')  # the default method

## function (x, ..., inline = FALSE) 
## {
##     if (inline) 
##         x
##     else normal_print(x)
## }
## <bytecode: 0x562a544e2668>
## <environment: namespace:knitr>

normal_print

## function (x, ...) 
## {
##     if (isS4(x)) 
##         methods::show(x)
##     else print(x)
## }
## <bytecode: 0x562a549d8860>
## <environment: namespace:knitr>

As we can see, knit_print() has a default method, which is basically print() or show(), depending on whether the object is an S4 object. This means it does nothing special when printing R objects:

knit_print(1:10)
##  [1]  1  2  3  4  5  6  7  8  9 10
knit_print(head(mtcars))
##                    mpg cyl disp  hp drat    wt  qsec vs am gear carb
## Mazda RX4         21.0   6  160 110 3.90 2.620 16.46  0  1    4    4
## Mazda RX4 Wag     21.0   6  160 110 3.90 2.875 17.02  0  1    4    4
## Datsun 710        22.8   4  108  93 3.85 2.320 18.61  1  1    4    1
## Hornet 4 Drive    21.4   6  258 110 3.08 3.215 19.44  1  0    3    1
## Hornet Sportabout 18.7   8  360 175 3.15 3.440 17.02  0  0    3    2
## Valiant           18.1   6  225 105 2.76 3.460 20.22  1  0    3    1

S3 generic functions are extensible in the sense that we can define custom methods for them. A method knit_print.foo() will be applied to the object that has the class foo. Here is quick example of how we can print data frames as tables:

library(knitr)
# define a method for objects of the class data.frame
knit_print.data.frame = function(x, ...) {
  res = paste(c('', '', kable(x)), collapse = '\n')
  asis_output(res)
}
# register the method
registerS3method("knit_print", "data.frame", knit_print.data.frame)

If you define a method in a code chunk in a knitr document, the call to registerS3method() will be necessary for R >= 3.5.0, because the S3 dispatch mechanism has changed since R 3.5.0. If you are developing an R package, see the section [For package authors] below.

We expect the print method to return a character vector, or an object that can be coerced into a character vector. In the example above, the kable() function returns a character vector, which we pass to the asis_output() function so that later knitr knows that this result needs no special treatment (just write it as is), otherwise it depends on the chunk option results (= 'asis' / 'markup' / 'hide') how a normal character vector should be written. The function asis_output() has the same effect as results = 'asis', but saves us the effort to provide this chunk option explicitly. Now we check how the printing behavior is changed. We print a number, a character vector, a list, a data frame, and write a character value using cat() in the chunk below:

1 + 1

## [1] 2

head(letters)

## [1] "a" "b" "c" "d" "e" "f"

list(a = 1, b = 9:4)

## $a
## [1] 1
## 
## $b
## [1] 9 8 7 6 5 4

head(mtcars)

	mpg	cyl	disp	hp	drat	wt	qsec	vs	am	gear	carb
Mazda RX4	21.0	6	160	110	3.90	2.620	16.46	0	1	4	4
Mazda RX4 Wag	21.0	6	160	110	3.90	2.875	17.02	0	1	4	4
Datsun 710	22.8	4	108	93	3.85	2.320	18.61	1	1	4	1
Hornet 4 Drive	21.4	6	258	110	3.08	3.215	19.44	1	0	3	1
Hornet Sportabout	18.7	8	360	175	3.15	3.440	17.02	0	0	3	2
Valiant	18.1	6	225	105	2.76	3.460	20.22	1	0	3	1

cat('This is cool.')

## This is cool.

We see all objects except the data frame were printed “normally”^[The two hashes ## were from the chunk option comment; you can turn them off by comment = ''.]. The data frame was printed as a real table. Note you do not have to use kable() to create tables – there are many other options such as xtable. Just make sure the print method returns a character string.

The printr package is a companion to knitr containing printing methods for some common objects like matrices and data frames. Users only need to load this package to get attractive printed results. A major factor to consider (which has been considered in printr) when defining a printing method is the output format. For example, the table syntax can be entirely different when the output is LaTeX vs when it is Markdown.

It is strongly recommended that your S3 method has a ... argument, so that your method can safely ignore arguments that are passed to knit_print() but not defined in your method. At the moment, a knit_print() method can have two optional arguments:

the options argument takes a list of the current chunk options;
the inline argument indicates if the method is called in code chunks or inline R code;

Depending on your application, you may optionally use these arguments. Here are some examples:

knit_print.classA = function(x, ...) {
  # ignore options and inline
}
knit_print.classB = function(x, options, ...) {
  # use the chunk option out.height
  asis_output(paste0(
    '<iframe src="https://yihui.org" height="', options$out.height, '"></iframe>',
  ))
}
knit_print.classC = function(x, inline = FALSE, ...) {
  # different output according to inline=TRUE/FALSE
  if (inline) {
    'inline output for classC'
  } else {
    'chunk output for classC'
  }
}
knit_print.classD = function(x, options, inline = FALSE, ...) {
  # use both options and inline
}

Note that when using your (or another) knit_print() method inline (if it supports that), you must not call knit_print() on the object, but just have it return. For example, your inline code should read `r c("foo")` and not `r knit_print(c("foo"))`. The latter inline code would yield the methods’ result for in-chunk (not inline), because, as set up in the above, knit_print() methods default to inline = FALSE. This default gets overwritten depending on the context in which knit_print() is called (inline or in-chunk), only when knit_print() is called by knitr (not you) via the render option (see below). You can, of course, always manually set the inline option `r knit_print(c("foo"), inline = TRUE)`, but that’s a lot of typing.

A Low-level Explanation

You can skip this section if you do not care about the low-level implementation details.

The `render` option

As mentioned before, the chunk option render is a function that defaults to knit_print(). We can certainly use other render functions. For example, we create a dummy function that always says “I do not know what to print” no matter what objects it receives:

dummy_print = function(x, ...) {
  cat("I do not know what to print!")
  # this function implicitly returns an invisible NULL
}

Now we use the chunk option render = dummy_print:

1 + 1
## I do not know what to print!
head(letters)
## I do not know what to print!
list(a = 1, b = 9:4)
## I do not know what to print!
head(mtcars)
## I do not know what to print!
cat('This is cool.')
## This is cool.

Note the render function is only applied to visible objects. There are cases in which the objects returned are invisible, e.g. those wrapped in invisible().

1 + 1

## [1] 2

invisible(1 + 1)
invisible(head(mtcars))
x = 1:10  # invisibly returns 1:10

Metadata

The print function can have a side effect of passing “metadata” about objects to knitr, and knitr will collect this information as it prints objects. The motivation of collecting metadata is to store external dependencies of the objects to be printed. Normally we print an object only to obtain a text representation, but there are cases that can be more complicated. For example, a ggvis graph requires external JavaScript and CSS dependencies such as ggvis.js. The graph itself is basically a fragment of JavaScript code, which will not work unless the required libraries are loaded (in the HTML header). Therefore we need to collect the dependencies of an object beside printing the object itself.

One way to specify the dependencies is through the meta argument of asis_output(). Here is a pseudo example:

# pseudo code
knit_print.ggvis = function(x, ...) {
  res = ggvis::print_this_object(x)
  knitr::asis_output(res, meta = list(
    ggvis = list(
      version = '0.1.0',
      js  = system.file('www', 'js',  'ggvis.js',  package = 'ggvis'),
      css = system.file('www', 'www', 'ggvis.css', package = 'ggvis')
    )
  ))
}

Then when knitr prints a ggvis object, the meta information will be collected and stored. After knitting is done, we can obtain a list of all the dependencies via knit_meta(). It is very likely that there are duplicate entries in the list, and it is up to the package authors to clean them up, and process the metadata list in their own way (e.g. write the dependencies into the HTML header). We give a few more quick and dirty examples below to see how knit_meta() works.

Now we define a print method for foo objects:

library(knitr)
knit_print.foo = function(x, ...) {
  res = paste('> **This is a `foo` object**:', x)
  asis_output(res, meta = list(
    js  = system.file('www', 'shared', 'shiny.js',  package = 'shiny'),
    css = system.file('www', 'shared', 'shiny.css', package = 'shiny')
  ))
}

See what happens when we print foo objects:

new_foo = function(x) structure(x, class = 'foo')
new_foo('hello')

This is a foo object: hello

Check the metadata now:

str(knit_meta(clean = FALSE))

## List of 2
##  $ js : chr ""
##  $ css: chr ""
##  - attr(*, "knit_meta_id")= chr [1:2] "unnamed-chunk-9" "unnamed-chunk-9"

Another foo object:

new_foo('world')

This is a foo object: world

Similarly for bar objects:

knit_print.bar = function(x, ...) {
  asis_output(x, meta = list(head = '<script>console.log("bar!")</script>'))
}
new_bar = function(x) structure(x, class = 'bar')
new_bar('> **hello** world!')

hello world!

new_bar('> hello **world**!')

hello world!

The final version of the metadata, and clean it up:

str(knit_meta())

## List of 6
##  $ js  : chr ""
##  $ css : chr ""
##  $ js  : chr ""
##  $ css : chr ""
##  $ head: chr "<script>console.log(\"bar!\")</script>"
##  $ head: chr "<script>console.log(\"bar!\")</script>"
##  - attr(*, "knit_meta_id")= chr [1:6] "unnamed-chunk-9" "unnamed-chunk-9" "unnamed-chunk-11" "unnamed-chunk-11" ...

str(knit_meta()) # empty now, because clean = TRUE by default

##  list()

For package authors

If you are implementing a custom print method in your own package, here are two tips:

With R >= 3.6.0 (2019-04-26), you can declare the S3 method in the package NAMESPACE with S3method(knitr::knit_print, class). If you use roxygen2 package, that means a roxygen comment like this:
```
#' @exportS3Method knitr::knit_print
knit_print.class <- 
```
With this method, you do not need to import knitr to your package, i.e., knitr can be listed in Suggests and not necessarily Imports in the package DESCRIPTION. The S3 methods will be automatically registered when knitr is actually loaded.

For R < 3.6.0, you need to import knit_print in your package namespace via importFrom(knitr, knit_print) (or roxygen: #' @importFrom knitr knit_print) (see the printr package for an example).
asis_output() is simply a function that marks an object with the class knit_asis, and you do not have to import this function to your package, either—just let your print method return structure(x, class = 'knit_asis'), and if there are additional metadata, just put it in the knit_meta attribute; here is the source code of this function:
```
knitr::asis_output
```
```
## function (x, meta = NULL, cacheable = NA) 
## {
##     structure(x, class = "knit_asis", knit_meta = meta, knit_cacheable = cacheable)
## }
## <bytecode: 0x562a54c36468>
## <environment: namespace:knitr>
```
You may put knitr in the Suggests field in DESCRIPTION, and use knitr::asis_output(), so that you can avoid the “hard” dependency on knitr.

Custom Print Methods

Yihui Xie

2024-11-08

Customize Printing

A Low-level Explanation

The `render` option

Metadata

For package authors

Custom Print Methods

Yihui Xie

2024-11-08

Customize Printing

A Low-level Explanation

The render option

Metadata

For package authors

The `render` option