Introduction to data.table

Note that:

• Row numbers are printed with a : in order to visually separate the row number from the first column.

• When the number of rows to print exceeds the global option datatable.print.nrows (default = 100), it automatically prints only the top 5 and bottom 5 rows (as can be seen in the Data section). For a large data.frame, you may have found yourself waiting around while larger tables print-and-page, sometimes seemingly endlessly. This restriction helps with that, and you can query the default number like so:

  getOption("datatable.print.nrows")

• data.table doesn’t set or use row names, ever. We will see why in the “Keys and fast binary search based subset” vignette.

The way to read it (out loud) is:

Take DT, subset/reorder rows using i, then calculate j, grouped by by.

Let’s begin by looking at i and j first - subsetting rows and operating on columns.

– Get all the flights with “JFK” as the origin airport in the month of June.

ans <- flights[origin == "JFK" & month == 6L]
head(ans)
#     year month   day dep_delay arr_delay carrier origin   dest air_time distance  hour
#    <int> <int> <int>     <int>     <int>  <char> <char> <char>    <int>    <int> <int>
# 1:  2014     6     1        -9        -5      AA    JFK    LAX      324     2475     8
# 2:  2014     6     1       -10       -13      AA    JFK    LAX      329     2475    12
# 3:  2014     6     1        18        -1      AA    JFK    LAX      326     2475     7
# 4:  2014     6     1        -6       -16      AA    JFK    LAX      320     2475    10
# 5:  2014     6     1        -4       -45      AA    JFK    LAX      326     2475    18
# 6:  2014     6     1        -6       -23      AA    JFK    LAX      329     2475    14

• Within the frame of a data.table, columns can be referred to as if they are variables, much like in SQL or Stata. Therefore, we simply refer to origin and month as if they are variables. We do not need to add the prefix flights$ each time. Nevertheless, using flights$origin and flights$month would work just fine.

• The row indices that satisfy the condition origin == "JFK" & month == 6L are computed, and since there is nothing else left to do, all columns from flights at rows corresponding to those row indices are simply returned as a data.table.

• A comma after the condition in i is not required. But flights[origin == "JFK" & month == 6L, ] would work just fine. In a data.frame, however, the comma is necessary.

– Get the first two rows from flights.

ans <- flights[1:2]
ans
#     year month   day dep_delay arr_delay carrier origin   dest air_time distance  hour
#    <int> <int> <int>     <int>     <int>  <char> <char> <char>    <int>    <int> <int>
# 1:  2014     1     1        14        13      AA    JFK    LAX      359     2475     9
# 2:  2014     1     1        -3        13      AA    JFK    LAX      363     2475    11

• In this case, there is no condition. The row indices are already provided in i. We therefore return a data.table with all columns from flights at rows for those row indices.

– Sort flights first by column origin in ascending order, and then by dest in descending order:

We can use the R function order() to accomplish this.

ans <- flights[order(origin, -dest)]
head(ans)
#     year month   day dep_delay arr_delay carrier origin   dest air_time distance  hour
#    <int> <int> <int>     <int>     <int>  <char> <char> <char>    <int>    <int> <int>
# 1:  2014     1     5         6        49      EV    EWR    XNA      195     1131     8
# 2:  2014     1     6         7        13      EV    EWR    XNA      190     1131     8
# 3:  2014     1     7        -6       -13      EV    EWR    XNA      179     1131     8
# 4:  2014     1     8        -7       -12      EV    EWR    XNA      184     1131     8
# 5:  2014     1     9        16         7      EV    EWR    XNA      181     1131     8
# 6:  2014     1    13        66        66      EV    EWR    XNA      188     1131     9

order() is internally optimised

• We can use “-” on character columns within the frame of a data.table to sort in decreasing order.

• In addition, order(...) within the frame of a data.table uses data.table’s internal fast radix order forder(). This sort provided such a compelling improvement over R’s base::order that the R project adopted the data.table algorithm as its default sort in 2016 for R 3.3.0 (for reference, check ?sort and the R Release NEWS).

We will discuss data.table’s fast order in more detail in the data.table internals vignette.

– Select arr_delay column, but return it as a vector.

ans <- flights[, arr_delay]
head(ans)
# [1]  13  13   9 -26   1   0

• Since columns can be referred to as if they are variables within the frame of a data.table, we directly refer to the variable we want to subset. Since we want all the rows, we simply skip i.

• It returns all the rows for the column arr_delay.

– Select arr_delay column, but return as a data.table instead.

ans <- flights[, list(arr_delay)]
head(ans)
#    arr_delay
#        <int>
# 1:        13
# 2:        13
# 3:         9
# 4:       -26
# 5:         1
# 6:         0

• We wrap the variables (column names) within list(), which ensures that a data.table is returned. In the case of a single column name, not wrapping with list() returns a vector instead, as seen in the previous example.

• data.table also allows wrapping columns with .() instead of list(). It is an alias to list(); they both mean the same. Feel free to use whichever you prefer; we have noticed most users seem to prefer .() for conciseness, so we will continue to use .() hereafter.

A data.table (and a data.frame too) is internally a list as well, with the stipulation that each element has the same length and the list has a class attribute. Allowing j to return a list enables converting and returning data.table very efficiently.

Tip:

As long as j-expression returns a list, each element of the list will be converted to a column in the resulting data.table. This makes j quite powerful, as we will see shortly. It is also very important to understand this for when you’d like to make more complicated queries!!

– Select both arr_delay and dep_delay columns.

ans <- flights[, .(arr_delay, dep_delay)]
head(ans)
#    arr_delay dep_delay
#        <int>     <int>
# 1:        13        14
# 2:        13        -3
# 3:         9         2
# 4:       -26        -8
# 5:         1         2
# 6:         0         4

## alternatively
# ans <- flights[, list(arr_delay, dep_delay)]

• Wrap both columns within .(), or list(). That’s it.

– Select both arr_delay and dep_delay columns and rename them to delay_arr and delay_dep.

Since .() is just an alias for list(), we can name columns as we would while creating a list.

ans <- flights[, .(delay_arr = arr_delay, delay_dep = dep_delay)]
head(ans)
#    delay_arr delay_dep
#        <int>     <int>
# 1:        13        14
# 2:        13        -3
# 3:         9         2
# 4:       -26        -8
# 5:         1         2
# 6:         0         4

– How many trips have had total delay < 0?

ans <- flights[, sum( (arr_delay + dep_delay) < 0 )]
ans
# [1] 141814

What’s happening here?

• data.table’s j can handle more than just selecting columns - it can handle expressions, i.e., computing on columns. This shouldn’t be surprising, as columns can be referred to as if they are variables. Then we should be able to compute by calling functions on those variables. And that’s what precisely happens here.

– Calculate the average arrival and departure delay for all flights with “JFK” as the origin airport in the month of June.

ans <- flights[origin == "JFK" & month == 6L,
               .(m_arr = mean(arr_delay), m_dep = mean(dep_delay))]
ans
#       m_arr    m_dep
#       <num>    <num>
# 1: 5.839349 9.807884

• We first subset in i to find matching row indices where origin airport equals "JFK", and month equals 6L. We do not subset the entire data.table corresponding to those rows yet.

• Now, we look at j and find that it uses only two columns. And what we have to do is to compute their mean(). Therefore, we subset just those columns corresponding to the matching rows, and compute their mean().

Because the three main components of the query (i, j and by) are together inside [...], data.table can see all three and optimise the query altogether before evaluation, rather than optimizing each separately. We are able to therefore avoid the entire subset (i.e., subsetting the columns besides arr_delay and dep_delay), for both speed and memory efficiency.

– How many trips have been made in 2014 from “JFK” airport in the month of June?

ans <- flights[origin == "JFK" & month == 6L, length(dest)]
ans
# [1] 8422

The function length() requires an input argument. We just need to compute the number of rows in the subset. We could have used any other column as the input argument to length(). This approach is reminiscent of SELECT COUNT(dest) FROM flights WHERE origin = 'JFK' AND month = 6 in SQL.

This type of operation occurs quite frequently, especially while grouping (as we will see in the next section), to the point where data.table provides a special symbol .N for it.

– What happens when querying for non-existing elements?

When querying a data.table for elements that do not exist, the behavior differs based on the method used.

setkeyv(flights, "origin")

• Key-based subsetting: dt["d"]

  This performs a right join on the key column x, resulting in a row with d and NA for columns not found. When using setkeyv, the table is sorted by the specified keys and an internal index is created, enabling binary search for efficient subsetting.

  flights["XYZ"]
  # Returns:
  #    origin year month day dep_time sched_dep_time dep_delay arr_time sched_arr_time arr_delay carrier flight tailnum ...
  # 1:    XYZ   NA    NA  NA       NA             NA        NA       NA             NA        NA      NA     NA      NA ...

• Logical subsetting: dt[x == "d"]

  This performs a standard subset operation that does not find any matching rows and thus returns an empty data.table.

    flights[origin == "XYZ"]
  # Returns:
  # Empty data.table (0 rows and 19 cols): year,month,day,dep_time,sched_dep_time,dep_delay,arr_time,sched_arr_time,arr_delay,...

• Exact match using nomatch=NULL

  For exact matches without NA for non-existing elements, use nomatch=NULL:

  flights["XYZ", nomatch=NULL]
  # Returns:
  # Empty data.table (0 rows and 19 cols): year,month,day,dep_time,sched_dep_time,dep_delay,arr_time,sched_arr_time,arr_delay,...

Understanding these behaviors can help prevent confusion when dealing with non-existing elements in your data.

Special symbol .N:

.N is a special built-in variable that holds the number of observations in the current group. It is particularly useful when combined with by as we’ll see in the next section. In the absence of group by operations, it simply returns the number of rows in the subset.

Now that we now, we can now accomplish the same task by using .N as follows:

ans <- flights[origin == "JFK" & month == 6L, .N]
ans
# [1] 8422

• Once again, we subset in i to get the row indices where origin airport equals “JFK”, and month equals 6.

• We see that j uses only .N and no other columns. Therefore, the entire subset is not materialised. We simply return the number of rows in the subset (which is just the length of row indices).

• Note that we did not wrap .N with list() or .(). Therefore, a vector is returned.

We could have accomplished the same operation by doing nrow(flights[origin == "JFK" & month == 6L]). However, it would have to subset the entire data.table first corresponding to the row indices in i and then return the rows using nrow(), which is unnecessary and inefficient. We will cover this and other optimisation aspects in detail under the data.table design vignette.

– Select both arr_delay and dep_delay columns the data.frame way.

ans <- flights[, c("arr_delay", "dep_delay")]
head(ans)
#    arr_delay dep_delay
#        <int>     <int>
# 1:        13        14
# 2:        13        -3
# 3:         9         2
# 4:       -26        -8
# 5:         1         2
# 6:         0         4

If you’ve stored the desired columns in a character vector, there are two options: Using the .. prefix, or using the with argument.

– Select columns named in a variable using the .. prefix

select_cols = c("arr_delay", "dep_delay")
flights[ , ..select_cols]
#         arr_delay dep_delay
#             <int>     <int>
#      1:        13        14
#      2:        13        -3
#      3:         9         2
#      4:       -26        -8
#      5:         1         2
#     ---                    
# 253312:       -30         1
# 253313:       -14        -5
# 253314:        16        -8
# 253315:        15        -4
# 253316:         1        -5

For those familiar with the Unix terminal, the .. prefix should be reminiscent of the “up-one-level” command, which is analogous to what’s happening here – the .. signals to data.table to look for the select_cols variable “up-one-level”, i.e., within the global environment in this case.

– Select columns named in a variable using with = FALSE

flights[ , select_cols, with = FALSE]
#         arr_delay dep_delay
#             <int>     <int>
#      1:        13        14
#      2:        13        -3
#      3:         9         2
#      4:       -26        -8
#      5:         1         2
#     ---                    
# 253312:       -30         1
# 253313:       -14        -5
# 253314:        16        -8
# 253315:        15        -4
# 253316:         1        -5

The argument is named with after the R function with() because of similar functionality. Suppose you have a data.frame DF and you’d like to subset all rows where x > 1. In base R you can do the following:

DF = data.frame(x = c(1,1,1,2,2,3,3,3), y = 1:8)

## (1) normal way
DF[DF$x > 1, ] # data.frame needs that ',' as well
#   x y
# 4 2 4
# 5 2 5
# 6 3 6
# 7 3 7
# 8 3 8

## (2) using with
DF[with(DF, x > 1), ]
#   x y
# 4 2 4
# 5 2 5
# 6 3 6
# 7 3 7
# 8 3 8

• Using with() in (2) allows using DF’s column x as if it were a variable.

  Hence, the argument name with in data.table. Setting with = FALSE disables the ability to refer to columns as if they are variables, thereby restoring the “data.frame mode”.

• We can also deselect columns using - or !. For example:

  ## not run
  
  # returns all columns except arr_delay and dep_delay
  ans <- flights[, !c("arr_delay", "dep_delay")]
  # or
  ans <- flights[, -c("arr_delay", "dep_delay")]

• From v1.9.5+, we can also select by specifying start and end column names, e.g., year:day to select the first three columns.

  ## not run
  
  # returns year,month and day
  ans <- flights[, year:day]
  # returns day, month and year
  ans <- flights[, day:year]
  # returns all columns except year, month and day
  ans <- flights[, -(year:day)]
  ans <- flights[, !(year:day)]

  This is particularly handy while working interactively.

with = TRUE is the default in data.table because we can do much more by allowing j to handle expressions - especially when combined with by, as we’ll see in a moment.

– How can we get the number of trips corresponding to each origin airport?

ans <- flights[, .(.N), by = .(origin)]
ans
#    origin     N
#    <char> <int>
# 1:    JFK 81483
# 2:    LGA 84433
# 3:    EWR 87400

## or equivalently using a character vector in 'by'
# ans <- flights[, .(.N), by = "origin"]

• We know .N is a special variable that holds the number of rows in the current group. Grouping by origin obtains the number of rows, .N, for each group.

• By doing head(flights) you can see that the origin airports occur in the order “JFK”, “LGA”, and “EWR”. The original order of grouping variables is preserved in the result. This is important to keep in mind!

• Since we did not provide a name for the column returned in j, it was named N automatically by recognising the special symbol .N.

• by also accepts a character vector of column names. This is particularly useful for coding programmatically, e.g., designing a function with the grouping columns (in the form of a character vector) as a function argument.

• When there’s only one column or expression to refer to in j and by, we can drop the .() notation. This is purely for convenience. We could instead do:

  ans <- flights[, .N, by = origin]
  ans
  #    origin     N
  #    <char> <int>
  # 1:    JFK 81483
  # 2:    LGA 84433
  # 3:    EWR 87400

  We’ll use this convenient form wherever applicable hereafter.

– How can we calculate the number of trips for each origin airport for carrier code "AA"?

The unique carrier code "AA" corresponds to American Airlines Inc.

ans <- flights[carrier == "AA", .N, by = origin]
ans
#    origin     N
#    <char> <int>
# 1:    JFK 11923
# 2:    LGA 11730
# 3:    EWR  2649

• We first obtain the row indices for the expression carrier == "AA" from i.

• Using those row indices, we obtain the number of rows while grouped by origin. Once again no columns are actually materialised here, because the j-expression does not require any columns to be actually subsetted and is therefore fast and memory efficient.

– How can we get the total number of trips for each origin, dest pair for carrier code "AA"?

ans <- flights[carrier == "AA", .N, by = .(origin, dest)]
head(ans)
#    origin   dest     N
#    <char> <char> <int>
# 1:    JFK    LAX  3387
# 2:    LGA    PBI   245
# 3:    EWR    LAX    62
# 4:    JFK    MIA  1876
# 5:    JFK    SEA   298
# 6:    EWR    MIA   848

## or equivalently using a character vector in 'by'
# ans <- flights[carrier == "AA", .N, by = c("origin", "dest")]

• by accepts multiple columns. We just provide all the columns by which to group by. Note the use of .() again in by – again, this is just shorthand for list(), and list() can be used here as well. Again, we’ll stick with .() in this vignette.

– How can we get the average arrival and departure delay for each orig,dest pair for each month for carrier code "AA"?

ans <- flights[carrier == "AA",
        .(mean(arr_delay), mean(dep_delay)),
        by = .(origin, dest, month)]
ans
#      origin   dest month         V1         V2
#      <char> <char> <int>      <num>      <num>
#   1:    JFK    LAX     1   6.590361 14.2289157
#   2:    LGA    PBI     1  -7.758621  0.3103448
#   3:    EWR    LAX     1   1.366667  7.5000000
#   4:    JFK    MIA     1  15.720670 18.7430168
#   5:    JFK    SEA     1  14.357143 30.7500000
#  ---                                          
# 196:    LGA    MIA    10  -6.251799 -1.4208633
# 197:    JFK    MIA    10  -1.880184  6.6774194
# 198:    EWR    PHX    10  -3.032258 -4.2903226
# 199:    JFK    MCO    10 -10.048387 -1.6129032
# 200:    JFK    DCA    10  16.483871 15.5161290

• Since we did not provide column names for the expressions in j, they were automatically generated as V1 and V2.

• Once again, note that the input order of grouping columns is preserved in the result.

Now what if we would like to order the result by those grouping columns origin, dest and month?

– So how can we directly order by all the grouping variables?

ans <- flights[carrier == "AA",
        .(mean(arr_delay), mean(dep_delay)),
        keyby = .(origin, dest, month)]
ans
# Key: <origin, dest, month>
#      origin   dest month         V1         V2
#      <char> <char> <int>      <num>      <num>
#   1:    EWR    DFW     1   6.427673 10.0125786
#   2:    EWR    DFW     2  10.536765 11.3455882
#   3:    EWR    DFW     3  12.865031  8.0797546
#   4:    EWR    DFW     4  17.792683 12.9207317
#   5:    EWR    DFW     5  18.487805 18.6829268
#  ---                                          
# 196:    LGA    PBI     1  -7.758621  0.3103448
# 197:    LGA    PBI     2  -7.865385  2.4038462
# 198:    LGA    PBI     3  -5.754098  3.0327869
# 199:    LGA    PBI     4 -13.966667 -4.7333333
# 200:    LGA    PBI     5 -10.357143 -6.8571429

• All we did was change by to keyby. This automatically orders the result by the grouping variables in increasing order. In fact, due to the internal implementation of by first requiring a sort before recovering the original table’s order, keyby is typically faster than by because it doesn’t require this second step.

Keys: Actually keyby does a little more than just ordering. It also sets a key after ordering by setting an attribute called sorted.

We’ll learn more about keys in the Keys and fast binary search based subset vignette; for now, all you have to know is that you can use keyby to automatically order the result by the columns specified in by.

– How can we order ans using the columns origin in ascending order, and dest in descending order?

We can store the intermediate result in a variable, and then use order(origin, -dest) on that variable. It seems fairly straightforward.

ans <- ans[order(origin, -dest)]
head(ans)
#    origin   dest     N
#    <char> <char> <int>
# 1:    EWR    PHX   121
# 2:    EWR    MIA   848
# 3:    EWR    LAX    62
# 4:    EWR    DFW  1618
# 5:    JFK    STT   229
# 6:    JFK    SJU   690

• Recall that we can use - on a character column in order() within the frame of a data.table. This is possible due to data.table’s internal query optimisation.

• Also recall that order(...) with the frame of a data.table is automatically optimised to use data.table’s internal fast radix order forder() for speed.

But this requires having to assign the intermediate result and then overwriting that result. We can do one better and avoid this intermediate assignment to a temporary variable altogether by chaining expressions.

ans <- flights[carrier == "AA", .N, by = .(origin, dest)][order(origin, -dest)]
head(ans, 10)
#     origin   dest     N
#     <char> <char> <int>
#  1:    EWR    PHX   121
#  2:    EWR    MIA   848
#  3:    EWR    LAX    62
#  4:    EWR    DFW  1618
#  5:    JFK    STT   229
#  6:    JFK    SJU   690
#  7:    JFK    SFO  1312
#  8:    JFK    SEA   298
#  9:    JFK    SAN   299
# 10:    JFK    ORD   432

• We can tack expressions one after another, forming a chain of operations, i.e., DT[ ... ][ ... ][ ... ].

• Or you can also chain them vertically:

  DT[ ...
     ][ ...
       ][ ...
         ]

– Can by accept expressions as well or does it just take columns?

Yes it does. As an example, if we would like to find out how many flights started late but arrived early (or on time), started and arrived late etc…

ans <- flights[, .N, .(dep_delay>0, arr_delay>0)]
ans
#    dep_delay arr_delay      N
#       <lgcl>    <lgcl>  <int>
# 1:      TRUE      TRUE  72836
# 2:     FALSE      TRUE  34583
# 3:     FALSE     FALSE 119304
# 4:      TRUE     FALSE  26593

• The last row corresponds to dep_delay > 0 = TRUE and arr_delay > 0 = FALSE. We can see that 26593 flights started late but arrived early (or on time).

• Note that we did not provide any names to by-expression. Therefore, names have been automatically assigned in the result. As with j, you can name these expressions as you would for elements of any list, like for e.g. DT[, .N, .(dep_delayed = dep_delay>0, arr_delayed = arr_delay>0)].

• You can provide other columns along with expressions, for example: DT[, .N, by = .(a, b>0)].

– Do we have to compute mean() for each column individually?

It is of course not practical to have to type mean(myCol) for every column one by one. What if you had 100 columns to average mean()?

How can we do this efficiently and concisely? To get there, refresh on this tip - “As long as the j-expression returns a list, each element of the list will be converted to a column in the resulting data.table”. If we can refer to the data subset for each group as a variable while grouping, we can then loop through all the columns of that variable using the already- or soon-to-be-familiar base function lapply(). No new names to learn specific to data.table.

Special symbol .SD:

data.table provides a special symbol called .SD. It stands for Subset of Data. It by itself is a data.table that holds the data for the current group defined using by.

Recall that a data.table is internally a list as well with all its columns of equal length.

Let’s use the data.table DT from before to get a glimpse of what .SD looks like.

DT
#        ID     a     b     c
#    <char> <int> <int> <int>
# 1:      b     1     7    13
# 2:      b     2     8    14
# 3:      b     3     9    15
# 4:      a     4    10    16
# 5:      a     5    11    17
# 6:      c     6    12    18

DT[, print(.SD), by = ID]
#        a     b     c
#    <int> <int> <int>
# 1:     1     7    13
# 2:     2     8    14
# 3:     3     9    15
#        a     b     c
#    <int> <int> <int>
# 1:     4    10    16
# 2:     5    11    17
#        a     b     c
#    <int> <int> <int>
# 1:     6    12    18
# Empty data.table (0 rows and 1 cols): ID

• .SD contains all the columns except the grouping columns by default.

• It is also generated by preserving the original order - data corresponding to ID = "b", then ID = "a", and then ID = "c".

To compute on (multiple) columns, we can then simply use the base R function lapply().

DT[, lapply(.SD, mean), by = ID]
#        ID     a     b     c
#    <char> <num> <num> <num>
# 1:      b   2.0   8.0  14.0
# 2:      a   4.5  10.5  16.5
# 3:      c   6.0  12.0  18.0

• .SD holds the rows corresponding to columns a, b and c for that group. We compute the mean() on each of these columns using the already-familiar base function lapply().

• Each group returns a list of three elements containing the mean value which will become the columns of the resulting data.table.

• Since lapply() returns a list, so there is no need to wrap it with an additional .() (if necessary, refer to this tip).

We are almost there. There is one little thing left to address. In our flights data.table, we only wanted to calculate the mean() of the two columns arr_delay and dep_delay. But .SD would contain all the columns other than the grouping variables by default.

– How can we specify just the columns we would like to compute the mean() on?

.SDcols

Using the argument .SDcols. It accepts either column names or column indices. For example, .SDcols = c("arr_delay", "dep_delay") ensures that .SD contains only these two columns for each group.

Similar to part g), you can also specify the columns to remove instead of columns to keep using - or !. Additionally, you can select consecutive columns as colA:colB and deselect them as !(colA:colB) or -(colA:colB).

Now let us try to use .SD along with .SDcols to get the mean() of arr_delay and dep_delay columns grouped by origin, dest and month.

flights[carrier == "AA",                       ## Only on trips with carrier "AA"
        lapply(.SD, mean),                     ## compute the mean
        by = .(origin, dest, month),           ## for every 'origin,dest,month'
        .SDcols = c("arr_delay", "dep_delay")] ## for just those specified in .SDcols
#      origin   dest month  arr_delay  dep_delay
#      <char> <char> <int>      <num>      <num>
#   1:    JFK    LAX     1   6.590361 14.2289157
#   2:    LGA    PBI     1  -7.758621  0.3103448
#   3:    EWR    LAX     1   1.366667  7.5000000
#   4:    JFK    MIA     1  15.720670 18.7430168
#   5:    JFK    SEA     1  14.357143 30.7500000
#  ---                                          
# 196:    LGA    MIA    10  -6.251799 -1.4208633
# 197:    JFK    MIA    10  -1.880184  6.6774194
# 198:    EWR    PHX    10  -3.032258 -4.2903226
# 199:    JFK    MCO    10 -10.048387 -1.6129032
# 200:    JFK    DCA    10  16.483871 15.5161290

– How can we return the first two rows for each month?

ans <- flights[, head(.SD, 2), by = month]
head(ans)
#    month  year   day dep_delay arr_delay carrier origin   dest air_time distance  hour
#    <int> <int> <int>     <int>     <int>  <char> <char> <char>    <int>    <int> <int>
# 1:     1  2014     1        14        13      AA    JFK    LAX      359     2475     9
# 2:     1  2014     1        -3        13      AA    JFK    LAX      363     2475    11
# 3:     2  2014     1        -1         1      AA    JFK    LAX      358     2475     8
# 4:     2  2014     1        -5         3      AA    JFK    LAX      358     2475    11
# 5:     3  2014     1       -11        36      AA    JFK    LAX      375     2475     8
# 6:     3  2014     1        -3        14      AA    JFK    LAX      368     2475    11

• .SD is a data.table that holds all the rows for that group. We simply subset the first two rows as we have seen here already.

• For each group, head(.SD, 2) returns the first two rows as a data.table, which is also a list, so we do not have to wrap it with .().

– How can we concatenate columns a and b for each group in ID?

DT[, .(val = c(a,b)), by = ID]
#         ID   val
#     <char> <int>
#  1:      b     1
#  2:      b     2
#  3:      b     3
#  4:      b     7
#  5:      b     8
#  6:      b     9
#  7:      a     4
#  8:      a     5
#  9:      a    10
# 10:      a    11
# 11:      c     6
# 12:      c    12

• That’s it. There is no special syntax required. All we need to know is the base function c() which concatenates vectors and the tip from before.

– What if we would like to have all the values of column a and b concatenated, but returned as a list column?

DT[, .(val = list(c(a,b))), by = ID]
#        ID         val
#    <char>      <list>
# 1:      b 1,2,3,7,8,9
# 2:      a  4, 5,10,11
# 3:      c        6,12

• Here, we first concatenate the values with c(a,b) for each group, and wrap that with list(). So for each group, we return a list of all concatenated values.

• Note that those commas are for display only. A list column can contain any object in each cell, and in this example, each cell is itself a vector and some cells contain longer vectors than others.

Once you start internalising usage in j, you will realise how powerful the syntax can be. A very useful way to understand it is by playing around, with the help of print().

For example:

## look at the difference between
DT[, print(c(a,b)), by = ID] # (1)
# [1] 1 2 3 7 8 9
# [1]  4  5 10 11
# [1]  6 12
# Empty data.table (0 rows and 1 cols): ID

## and
DT[, print(list(c(a,b))), by = ID] # (2)
# [[1]]
# [1] 1 2 3 7 8 9
# 
# [[1]]
# [1]  4  5 10 11
# 
# [[1]]
# [1]  6 12
# Empty data.table (0 rows and 1 cols): ID

In (1), for each group, a vector is returned, with length = 6,4,2 here. However, (2) returns a list of length 1 for each group, with its first element holding vectors of length 6,4,2. Therefore, (1) results in a length of 6+4+2 = 12, whereas (2) returns 1+1+1=3.