Package 'colleyRstats'

Description

This function calculates the Pareto front using emoa for a given set of objectives in a data frame and adds a new column, PARETO_EMOA, which indicates whether each row in the data frame belongs to the Pareto front.

Usage

add_pareto_emoa_column(data, objectives)

Arguments

Value

A data frame with the same columns as data, along with an additional column, PARETO_EMOA, which is TRUE for rows that are on the Pareto front and FALSE otherwise.

Examples

# Define objective columns
objectives <- c("trust", "predictability", "perceivedSafety", "Comfort")

# Example data frame
main_df <- data.frame(
  trust = runif(10),
  predictability = runif(10),
  perceivedSafety = runif(10),
  Comfort = runif(10)
)

# Add the Pareto front column
main_df <- add_pareto_emoa_column(data = main_df, objectives)
head(main_df)

Description

This function calculates the Pareto front using moocore for a given set of objectives in a data frame and adds a new column, PARETO_MOOCORE, which indicates whether each row in the data frame belongs to the Pareto front.

Usage

add_pareto_moocore_column(data, objectives)

Arguments

Value

A data frame with the same columns as data, along with an additional column, PARETO_MOOCORE, which is TRUE for rows that are on the Pareto front and FALSE otherwise.

Examples

# Define objective columns
objectives <- c("trust", "predictability", "perceivedSafety", "Comfort")

# Example data frame
main_df <- data.frame(
  trust = runif(10),
  predictability = runif(10),
  perceivedSafety = runif(10),
  Comfort = runif(10)
)

# Add the Pareto front column
main_df <- add_pareto_moocore_column(data = main_df, objectives)
head(main_df)

Description

One-call pipeline for a single dependent variable: checks the assumptions (producing a ready-made methods sentence via assumption_methods_text()), builds the matching ggstatsplot figure with automatic parametric/non-parametric selection, reports the omnibus test via reportggstatsplot(), and – for more than two groups – reports the significant post-hoc comparisons via reportggstatsplotPostHoc().

Usage

analyze_and_report(
  data,
  dv,
  iv,
  design = c("between", "within"),
  ylab = dv,
  xlabels = NULL,
  plotType = "boxviolin",
  sink_to = NULL
)

Arguments

Value

Invisibly returns a list with components plot (the ggplot), methods (assumption-check sentence), text (omnibus result), posthoc (post-hoc sentences, or NULL for two groups), and sentences (all text combined, in manuscript order).

Examples

result <- analyze_and_report(mtcars, dv = "mpg", iv = "cyl")
result$plot

Description

Runs the group-wise Shapiro-Wilk normality check (and optionally Levene's test for homogeneity of variances) and turns the outcome into a ready-made methods-section sentence, including the relevant statistics. This is the justification reviewers expect next to the choice of a parametric or non-parametric test.

Usage

assumption_methods_text(data, x, y, include_homogeneity = FALSE)

Arguments

Value

Invisibly returns the sentence(s) as a single string; the text is also emitted via message().

Examples

set.seed(1)
d <- data.frame(g = rep(c("A", "B"), each = 20), v = rnorm(40))
assumption_methods_text(d, x = "g", y = "v")

Description

Check homogeneity of variances across groups

Usage

check_homogeneity_by_group(data, x, y)

Arguments

Value

TRUE if Levene's test is non-significant (p >= .05), FALSE otherwise. The Levene test result (columns df1, df2, statistic, p) is attached in the "test" attribute, e.g. for use in a methods section via assumption_methods_text().

Description

Check normality for groups

Usage

check_normality_by_group(data, x, y)

Arguments

Value

TRUE if all groups are normal, FALSE otherwise. The per-group Shapiro-Wilk statistics are attached as a data frame in the "tests" attribute (columns: group, W, p_value), e.g. for use in a methods section via assumption_methods_text(). For groups with more than 5000 non-missing values, Shapiro-Wilk is computed on a random sample of 5000 observations (a warning is emitted); the returned value still reflects that sampled test. Because the sample is drawn randomly, results for such large groups are not reproducible unless a seed is set beforehand.

Description

Check the assumptions for an ANOVA with a variable number of factors: Normality and Homogeneity of variance assumption.

Usage

checkAssumptionsForAnova(data, y, factors)

check_assumptions_anova(data, y, factors)

Arguments

Value

A message indicating whether to use parametric or non-parametric ANOVA

Examples

set.seed(123)

main_df <- data.frame(
  tlx_mental      = rnorm(40),
  Video           = factor(rep(c("A", "B"), each = 20)),
  DriverPosition  = factor(rep(c("Left", "Right"), times = 20))
)

checkAssumptionsForAnova(
  data    = main_df,
  y       = "tlx_mental",
  factors = c("Video", "DriverPosition")
)

Description

Prints a ready-made methods phrase plus the BibTeX entries for the R packages behind the requested analysis methods, so a manuscript's methods section and bibliography can be filled in one step.

Usage

cite_methods(methods = c("ggstatsplot", "effectsize"), bibtex = TRUE)

Arguments

Value

Invisibly returns the generated lines as a character vector; the text is also emitted via message(). Methods whose package is not installed are skipped with a message.

Examples

cite_methods("ggstatsplot", bibtex = FALSE)

Description

Sets ggplot2 themes and conflict preferences to match the standards used in the colleyRstats workflow.

Usage

colleyRstats_setup(
  set_options = FALSE,
  set_theme = TRUE,
  set_conflicts = TRUE,
  print_citation = TRUE,
  verbose = TRUE
)

Arguments

Value

Invisibly returns NULL.

Examples

# Runs everywhere, no extra packages, no session side effects
colleyRstats::colleyRstats_setup(
  set_options = FALSE,
  set_theme = FALSE,
  set_conflicts = FALSE,
  print_citation = FALSE,
  verbose = FALSE
)


# Full setup (requires suggested packages; changes session defaults)
if (requireNamespace("ggplot2", quietly = TRUE) &&
    requireNamespace("see", quietly = TRUE)) {
  local({
    old_theme <- ggplot2::theme_get()
    on.exit(ggplot2::theme_set(old_theme), add = TRUE)

    colleyRstats::colleyRstats_setup(
      set_options = FALSE,
      set_conflicts = FALSE,   # avoid persisting conflict prefs in checks
      print_citation = FALSE,
      verbose = TRUE
    )

    ggplot2::ggplot(mtcars, ggplot2::aes(mpg, wt)) +
      ggplot2::geom_point()
  })
}

Description

Replace all occurrences of given values in all columns of a data frame.

The data data frame contains a collection of records, with attributes organized in columns. It may include various types of values, such as numerical, categorical, or textual data.

Usage

replace_values(data, to_replace, replace_with)

Arguments

Value

Modified data frame with specified values replaced.

Examples

data <- data.frame(
  q1 = c("neg2", "neg1", "0"),
  q2 = c("1", "neg2", "neg1")
)

replace_values(
  data,
  to_replace = c("neg2", "neg1"),
  replace_with = c("-2", "-1")
)

Description

Debug contrast errors in ANOVA-like models

Usage

debug_contr_error(dat, subset_vec = NULL)

Arguments

Value

A list with two elements:

nlevels

Integer vector giving the number of levels for each factor variable in dat.

levels

List of factor level labels for each factor variable in dat.

Examples

dat <- data.frame(
  group = factor(rep(letters[1:3], each = 3)),
  score = rnorm(9)
)

debug_contr_error(dat = dat)

Description

Function to define a plot, either showing the main or interaction effect in bold.

Usage

generateEffectPlot(
  data,
  x,
  y,
  fillColourGroup,
  ytext = "testylab",
  xtext = "testxlab",
  legendPos = c(0.1, 0.23),
  legendHeading = NULL,
  shownEffect = "main",
  effectLegend = FALSE,
  effectDescription = NULL,
  xLabelsOverwrite = NULL,
  useLatexMarkup = FALSE,
  numberColors = 6
)

plot_effect(
  data,
  x,
  y,
  fillColourGroup,
  ytext = "testylab",
  xtext = "testxlab",
  legendPos = c(0.1, 0.23),
  legendHeading = NULL,
  shownEffect = "main",
  effectLegend = FALSE,
  effectDescription = NULL,
  xLabelsOverwrite = NULL,
  useLatexMarkup = FALSE,
  numberColors = 6
)

Arguments

Value

a plot

Examples

set.seed(123)
main_df <- data.frame(
  strategy    = factor(rep(c("A", "B"), each = 20)),
  Emotion     = factor(rep(c("Happy", "Sad"), times = 20)),
  trust_mean  = rnorm(40, mean = 5, sd = 1)
)

generateEffectPlot(
  data = main_df,
  x = "strategy",
  y = "trust_mean",
  fillColourGroup = "Emotion",
  ytext = "Trust",
  xtext = "Strategy",
  legendPos = c(0.1, 0.23)
)

Description

This function generates a multi-objective optimization plot using ggplot2. The plot visualizes the relationship between the x and y variables, grouping and coloring by a fill variable, with the option to customize legend position, labels, and annotation of sampling and optimization phases.

Usage

generateMoboPlot(
  data,
  x,
  y,
  fillColourGroup = "ConditionID",
  ytext,
  legendPos = c(0.65, 0.85),
  numberSamplingSteps = 5,
  labelPosFormulaY = "top",
  verticalLinePosY = 0.75
)

plot_mobo(
  data,
  x,
  y,
  fillColourGroup = "ConditionID",
  ytext,
  legendPos = c(0.65, 0.85),
  numberSamplingSteps = 5,
  labelPosFormulaY = "top",
  verticalLinePosY = 0.75
)

Arguments

Value

A ggplot object representing the multi-objective optimization plot, ready to be rendered.

Examples

library(ggplot2)
library(ggpmisc)

# Example with numeric x-axis
df <- data.frame(
  x = 1:20,
  y = rnorm(20),
  ConditionID = rep(c("A", "B"), 10)
)
generateMoboPlot(df, x = "x", y = "y")

# Example with factor x-axis
df <- data.frame(
  x = factor(rep(1:5, each = 4)),
  y = rnorm(20),
  ConditionID = rep(c("A", "B"), 10)
)
generateMoboPlot(df, x = "x", y = "y", numberSamplingSteps = 3)

Description

This function generates a multi-objective optimization plot using ggplot2. The plot visualizes the relationship between the x and y variables, grouping and coloring by a fill variable, with the option to customize legend position, labels, and annotation of sampling and optimization phases. Appropriate if you use https://github.com/Pascal-Jansen/Bayesian-Optimization-for-Unity in version 1.1.0 or higher.

Usage

generateMoboPlot2(
  data,
  x = "Iteration",
  y,
  phaseCol = "Phase",
  fillColourGroup = "ConditionID",
  ytext,
  legendPos = c(0.65, 0.85),
  labelPosFormulaY = "top",
  labelPosFormulaX = "left",
  horizontalLinePosY = 0.75,
  horizontalLineDistToText = 0.3,
  fillLabels = NULL,
  annotationTextSize = 5
)

plot_mobo2(
  data,
  x = "Iteration",
  y,
  phaseCol = "Phase",
  fillColourGroup = "ConditionID",
  ytext,
  legendPos = c(0.65, 0.85),
  labelPosFormulaY = "top",
  labelPosFormulaX = "left",
  horizontalLinePosY = 0.75,
  horizontalLineDistToText = 0.3,
  fillLabels = NULL,
  annotationTextSize = 5
)

Arguments

Value

A ggplot object representing the multi-objective optimization plot, ready to be rendered.

Examples

library(ggplot2)
library(ggpmisc)

# Example with numeric x-axis
df <- data.frame(
  x = 1:20,
  y = rnorm(20),
  ConditionID = rep(c("A", "B"), 10),
  Phase = rep(c("Sampling", "Optimization"), 10)
)
generateMoboPlot2(data = df, x = "x", y = "y")

Description

Check the data's distribution. If non-normal, take the non-parametric variant of ggbetweenstats. x and y have to be in parentheses, e.g., "ConditionID".

Usage

ggbetweenstatsWithPriorNormalityCheck(
  data,
  x,
  y,
  ylab,
  xlabels = NULL,
  showPairwiseComp = TRUE,
  plotType = "boxviolin"
)

plot_between_stats(
  data,
  x,
  y,
  ylab,
  xlabels = NULL,
  showPairwiseComp = TRUE,
  plotType = "boxviolin"
)

Arguments

Value

A ggplot object produced by ggstatsplot::ggbetweenstats, which can be printed or further modified with +.

Examples

set.seed(123)

# Toy within-subject style data
main_df <- data.frame(
  Participant = factor(rep(1:20, each = 3)),
  CondID      = factor(rep(c("A", "B", "C"), times = 20)),
  tlx_mental  = rnorm(60, mean = 50, sd = 10)
)

# Custom x-axis labels
labels_xlab <- c("Condition A", "Condition B", "Condition C")


ggbetweenstatsWithPriorNormalityCheck(
  data = main_df,
  x = "CondID",
  y = "tlx_mental", ylab = "Mental Demand",
  xlabels = labels_xlab,
  showPairwiseComp = TRUE
)

Description

Check the data's distribution. If non-normal, take the non-parametric variant of ggbetweenstats. x and y have to be in parentheses, e.g., "ConditionID".

Usage

ggbetweenstatsWithPriorNormalityCheckAsterisk(
  data,
  x,
  y,
  ylab,
  xlabels,
  plotType = "boxviolin"
)

plot_between_stats_asterisk(data, x, y, ylab, xlabels, plotType = "boxviolin")

Arguments

Value

A ggplot object produced by ggstatsplot::ggbetweenstats with additional significance annotations, which can be printed or modified.

Examples

set.seed(123)

# Toy within-subject style data
main_df <- data.frame(
  Participant = factor(rep(1:20, each = 3)),
  CondID      = factor(rep(c("A", "B", "C"), times = 20)),
  tlx_mental  = rnorm(60, mean = 50, sd = 10)
)

# Custom x-axis labels
labels_xlab <- c("Condition A", "Condition B", "Condition C")


ggbetweenstatsWithPriorNormalityCheckAsterisk(
  data = main_df,
  x = "CondID", y = "tlx_mental", ylab = "Mental Demand", xlabels = labels_xlab
)

Description

Check the data's distribution. If non-normal, take the non-parametric variant of ggwithinstats. x and y have to be in parentheses, e.g., "ConditionID".

Usage

ggwithinstatsWithPriorNormalityCheck(
  data,
  x,
  y,
  ylab,
  xlabels = NULL,
  showPairwiseComp = TRUE,
  plotType = "boxviolin"
)

plot_within_stats(
  data,
  x,
  y,
  ylab,
  xlabels = NULL,
  showPairwiseComp = TRUE,
  plotType = "boxviolin"
)

Arguments

Value

A ggplot object produced by ggstatsplot::ggwithinstats with additional significance annotations, which can be printed or modified.

Examples

#'   set.seed(123)

# Toy within-subject style data
main_df <- data.frame(
  Participant = factor(rep(1:20, each = 3)),
  CondID      = factor(rep(c("A", "B", "C"), times = 20)),
  tlx_mental  = rnorm(60, mean = 50, sd = 10)
)

# Custom x-axis labels
labels_xlab <- c("Condition A", "Condition B", "Condition C")


ggwithinstatsWithPriorNormalityCheck(
  data = main_df,
  x = "CondID", y = "tlx_mental",
  ylab = "Mental Demand",
  xlabels = labels_xlab,
  showPairwiseComp = TRUE
)

Description

Check the data's distribution. If non-normal, take the non-parametric variant of ggwithinstats. x and y have to be in parentheses, e.g., "ConditionID". Add Asterisks instead of p-values.

Usage

ggwithinstatsWithPriorNormalityCheckAsterisk(
  data,
  x,
  y,
  ylab,
  xlabels,
  plotType = "boxviolin"
)

plot_within_stats_asterisk(data, x, y, ylab, xlabels, plotType = "boxviolin")

Arguments

Value

A ggplot object produced by ggstatsplot::ggwithinstats with additional significance annotations, which can be printed or modified.

Examples

set.seed(123)

# Toy within-subject style data
main_df <- data.frame(
  Participant = factor(rep(1:20, each = 3)),
  CondID      = factor(rep(c("A", "B", "C"), times = 20)),
  tlx_mental  = rnorm(60, mean = 50, sd = 10)
)

# Custom x-axis labels
labels_xlab <- c("Condition A", "Condition B", "Condition C")


ggwithinstatsWithPriorNormalityCheckAsterisk(
  data = main_df,
  x = "CondID", y = "tlx_mental",
  ylab = "Mental Demand", xlabels = labels_xlab
)

Description

All report functions emit LaTeX text that relies on a small set of custom commands. This helper prints the complete set, ready to paste into a manuscript preamble, or writes it to a file that can be included with \input{} (or renamed to .sty and loaded via \usepackage).

Usage

latex_preamble(path = NULL)

Arguments

Value

Invisibly returns the macro definitions as a character vector; the text is also emitted via message().

Examples

latex_preamble()

Description

This function transforms the text output from report::report() by performing several substitutions to prepare the text for LaTeX typesetting. In particular, it replaces instances of R2, ⁠%⁠, and ~ with the corresponding LaTeX code. Additionally, it provides options to:

• Omit bullet items marked as "non-significant" (when only_sig = TRUE).

• Remove a concluding note about standardized parameters (when remove_std = TRUE).

• Wrap bullet items in a LaTeX itemize environment or leave them as plain text (controlled by itemize).

Usage

latexify_report(
  x,
  print_result = TRUE,
  only_sig = FALSE,
  remove_std = FALSE,
  itemize = TRUE
)

Arguments

Value

A single string with the LaTeX-friendly formatted report text.

Examples

if (requireNamespace("report", quietly = TRUE)) {
  # Simple linear model on the iris dataset
  model <- stats::lm(
    Sepal.Length ~ Sepal.Width + Petal.Length,
    data = datasets::iris
  )

  # Format the report output, showing only significant items, removing the
  # standard note, and wrapping bullet items in an itemize environment.
  report_text <- try(report::report(model), silent = TRUE)
  if (!inherits(report_text, "try-error")) {
    latexify_report(
      report_text,
      only_sig = TRUE,
      remove_std = TRUE,
      itemize = TRUE
    )
  }
}

Description

Build a median/size label for plot annotations

Usage

n_fun(x)

Arguments

Value

A data frame with the median and label.

Description

Replace NA values with zero

Usage

na.zero(x)

Arguments

Value

A vector with NAs replaced by zeros.

Examples

na.zero(c(NA, 1, NA, 2))

Description

This function normalizes the values in a vector to the range [new_min, new_max] based on their original range [old_min, old_max].

Usage

normalize(x_vector, old_min, old_max, new_min, new_max)

Arguments

Value

A numeric vector with the normalized values.

Examples

normalize(c(1, 2, 3, 4, 5), 1, 5, 0, 1)

Description

Stops execution if x is NULL, empty, or contains only NAs.

Usage

not_empty(x, msg = "Input must not be empty.")

Arguments

Value

Invisible TRUE if valid.

Description

Negate %in% membership

Usage

not_in(x, y)

x %!in% y

Arguments

Value

Logical vector indicating non-membership.

Description

Convert Windows paths to R-friendly format

Usage

pathPrep(path = "clipboard", read_fn = NULL, write_fn = NULL)

Arguments

Value

A normalized path string.

Description

This function takes a data frame, optional header information, variables to consider, and a range for a Likert scale. It then calculates the Response Entropy Index (REI) and flags suspicious entries based on percentiles. Note that no rows are removed; entries are only flagged via the Suspicious column.

Usage

remove_outliers_REI(df, header = FALSE, variables = "", range = c(1, 5))

Arguments

Details

Missing responses are ignored when tallying answers. Responses outside the declared Likert range trigger a warning (they often indicate mis-coded data) but are still included in the REI computation.

For more information on the REI method, refer to: Response Entropy Index Method

Value

A data frame with calculated REI, percentile, and a 'Suspicious' flag.

Examples

df <- data.frame(var1 = c(1, 2, 3), var2 = c(2, 3, 4))
result <- remove_outliers_REI(df, TRUE, "var1,var2", c(1, 5))

Description

Runs analyze_and_report() for each dependent variable (e.g., all questionnaire scales of a study) and additionally returns a summary table of the omnibus tests with Holm-adjusted p-values across the dependent variables, plus – when patchwork is installed – a combined figure.

Usage

report_all(
  data,
  dvs,
  iv,
  design = c("between", "within"),
  labels = NULL,
  xlabels = NULL,
  plotType = "boxviolin",
  sink_dir = NULL
)

Arguments

Value

Invisibly returns a list with components results (named list of analyze_and_report() results), summary (data frame with one row per dv: method, statistic, p.value, and Holm-adjusted p.holm), and combined_plot (a patchwork figure, or NULL when patchwork is not installed).

Examples

out <- report_all(mtcars, dvs = c("mpg", "disp"), iv = "cyl")
out$summary

Generate the Latex-text based on the ARTool (see https://github.com/mjskay/ARTool). The ART result must be piped into an anova(). Only significant main and interaction effects are reported. P-values are rounded for the third digit. Attention: Effect sizes are not calculated! Attention: the independent variables of the formula and the term specifying the participant must be factors (i.e., use as.factor()).

Description

To easily copy and paste the results to your manuscript, the following commands must be defined in Latex: \newcommand{\F}[3]{$F({#1},{#2})={#3}$} \newcommand{\p}{\textit{p=}} \newcommand{\pminor}{\textit{p$<$}}

Usage

reportART(
  model,
  dv = "Testdependentvariable",
  write_to_clipboard = FALSE,
  sink_to = NULL
)

report_art(
  model,
  dv = "Testdependentvariable",
  write_to_clipboard = FALSE,
  sink_to = NULL
)

Arguments

Value

Invisibly returns the reported sentence(s) as a character vector; the text is also emitted via message().

Examples

if (requireNamespace("ARTool", quietly = TRUE)) {
  set.seed(123)

  main_df <- data.frame(
    tlx_mental = stats::rnorm(80),
    Video      = factor(rep(c("A", "B"), each = 40)),
    gesture    = factor(rep(c("G1", "G2"), times = 40)),
    eHMI       = factor(rep(c("On", "Off"), times = 40)),
    UserID     = factor(rep(1:20, each = 4))
  )

  art_model <- ARTool::art(
    tlx_mental ~ Video * gesture * eHMI +
      Error(UserID / (gesture * eHMI)),
    data = main_df
  )

  model_anova <- stats::anova(art_model)
  reportART(model_anova, dv = "mental demand")
}

Description

Companion to reportDunnTest() for aligned-rank-transform (ART) models. It extracts the significant pairwise comparisons produced by ARTool::art.con() (an emmeans contrast grid), computes the mean and standard deviation of the groups involved from the raw data, and prints LaTeX-formatted sentences.

Usage

reportArtCon(
  ac,
  data,
  iv = "testiv",
  dv = "testdv",
  paired = FALSE,
  id = NULL,
  sink_to = NULL
)

report_art_con(
  ac,
  data,
  iv = "testiv",
  dv = "testdv",
  paired = FALSE,
  id = NULL,
  sink_to = NULL
)

Arguments

Details

The p-values are taken as-is from the contrast object, i.e. they are already adjusted by whatever adjust was passed to art.con() (e.g. "holm"). The effect size is the rank-biserial correlation computed from the raw data. ART is most often used for within-subjects designs; pass paired = TRUE together with id (the subject column) to obtain the paired rank-biserial effect size.

Attention: ac must be a pairwise contrast over a single factor iv (e.g. art.con(model, ~ interaction_mode, adjust = "holm")).

Required commands in LaTeX: \newcommand{\padjminor}{\textit{p$_{adj}<$}} \newcommand{\padj}{\textit{p$_{adj}$=}} \newcommand{\rankbiserial}[1]{$r_{rb} = #1$}

Value

Invisibly returns the reported sentence(s) as a character vector; the text is also emitted via message().

Examples

if (requireNamespace("ARTool", quietly = TRUE) &&
  requireNamespace("emmeans", quietly = TRUE)) {
  set.seed(123)
  n <- 20
  df <- data.frame(
    UserID = factor(rep(seq_len(n), times = 3)),
    mode   = factor(rep(c("Hand", "Eye", "Both"), each = n)),
    prime  = factor(rep(rep(c("A", "B"), each = n / 2), times = 3))
  )
  df$score <- as.numeric(df$mode) * 2 + stats::rnorm(nrow(df))

  m  <- ARTool::art(score ~ mode * prime + Error(UserID / mode), data = df)
  ac <- ARTool::art.con(m, ~ mode, adjust = "holm")
  reportArtCon(ac, data = df, iv = "mode", dv = "score", paired = TRUE, id = "UserID")
}

Report ART contrasts (art.con) as a LaTeX table. Customizable with sensible defaults. Companion to reportDunnTestTable().

Description

Required commands in LaTeX: \newcommand{\padjminor}{\textit{p$_{adj}<$}} \newcommand{\padj}{\textit{p$_{adj}$=}} \newcommand{\rankbiserial}[1]{$r_{rb} = #1$}

Usage

reportArtConTable(
  ac,
  data,
  iv = "testiv",
  dv = "testdv",
  paired = FALSE,
  id = NULL,
  orderByP = FALSE,
  numberDigitsForPValue = 4,
  latexSize = "small",
  orderText = TRUE,
  sink_to = NULL
)

report_art_con_table(
  ac,
  data,
  iv = "testiv",
  dv = "testdv",
  paired = FALSE,
  id = NULL,
  orderByP = FALSE,
  numberDigitsForPValue = 4,
  latexSize = "small",
  orderText = TRUE,
  sink_to = NULL
)

Arguments

Value

Invisibly returns the rendered LaTeX table as a string (or NULL when xtable is unavailable); the table is also printed.

Examples

if (requireNamespace("ARTool", quietly = TRUE) &&
  requireNamespace("emmeans", quietly = TRUE)) {
  set.seed(123)
  n <- 20
  df <- data.frame(
    UserID = factor(rep(seq_len(n), times = 3)),
    mode   = factor(rep(c("Hand", "Eye", "Both"), each = n)),
    prime  = factor(rep(rep(c("A", "B"), each = n / 2), times = 3))
  )
  df$score <- as.numeric(df$mode) * 2 + stats::rnorm(nrow(df))

  m  <- ARTool::art(score ~ mode * prime + Error(UserID / mode), data = df)
  ac <- ARTool::art.con(m, ~ mode, adjust = "holm")
  reportArtConTable(ac, data = df, iv = "mode", dv = "score", paired = TRUE, id = "UserID")
}

Description

Report dunnTest as text. Required commands in LaTeX: \newcommand{\padjminor}{\textit{p$_{adj}<$}} \newcommand{\padj}{\textit{p$_{adj}$=}} \newcommand{\rankbiserial}[1]{$r_{rb} = #1$}

Usage

reportDunnTest(d, data, iv = "testiv", dv = "testdv", sink_to = NULL)

report_dunn_test(d, data, iv = "testiv", dv = "testdv", sink_to = NULL)

Arguments

Value

Invisibly returns the reported sentence(s) as a character vector; the text is also emitted via message().

Examples

if (requireNamespace("FSA", quietly = TRUE)) {
  # Use built-in iris data
  data(iris)

  # Dunn test on Sepal.Length by Species
  d <- FSA::dunnTest(Sepal.Length ~ Species,
    data   = iris,
    method = "holm"
  )

  # Report the Dunn test
  reportDunnTest(d,
    data = iris,
    iv   = "Species",
    dv   = "Sepal.Length"
  )
}

Description

report Dunn test as a table. Customizable with sensible defaults. Required commands in LaTeX: \newcommand{\padjminor}{\textit{p$_{adj}<$}} \newcommand{\padj}{\textit{p$_{adj}$=}} \newcommand{\rankbiserial}[1]{$r_{rb} = #1$}

Usage

reportDunnTestTable(
  d = NULL,
  data,
  iv = "testiv",
  dv = "testdv",
  orderByP = FALSE,
  numberDigitsForPValue = 4,
  latexSize = "small",
  orderText = TRUE,
  sink_to = NULL
)

report_dunn_test_table(
  d = NULL,
  data,
  iv = "testiv",
  dv = "testdv",
  orderByP = FALSE,
  numberDigitsForPValue = 4,
  latexSize = "small",
  orderText = TRUE,
  sink_to = NULL
)

Arguments

Value

Invisibly returns the rendered LaTeX table as a string (or NULL when xtable is unavailable); the table is also printed.

Examples

if (requireNamespace("FSA", quietly = TRUE)) {
  # Use built-in iris data
  data(iris)

  # Dunn test on Sepal.Length by Species
  d <- FSA::dunnTest(Sepal.Length ~ Species,
    data   = iris,
    method = "holm"
  )

  # Report the Dunn test
  reportDunnTestTable(d,
    data = iris,
    iv   = "Species",
    dv   = "Sepal.Length"
  )
}

Description

Report statistical details for ggstatsplot.

Usage

reportggstatsplot(
  p,
  iv = "independent",
  dv = "Testdependentvariable",
  write_to_clipboard = FALSE,
  sink_to = NULL
)

report_ggstatsplot(
  p,
  iv = "independent",
  dv = "Testdependentvariable",
  write_to_clipboard = FALSE,
  sink_to = NULL
)

Arguments

Value

Invisibly returns the reported sentence(s) as a character vector; the text is also emitted via message().

Examples

library(ggstatsplot)
library(dplyr)

# Generate a plot
plt <- ggbetweenstats(mtcars, am, mpg)

reportggstatsplot(plt, iv = "am", dv = "mpg")

Description

This function extracts significant pairwise comparisons from a ggstatsplot object, calculates the mean and standard deviation for the groups involved using the raw data, and prints LaTeX-formatted sentences reporting the results.

Usage

reportggstatsplotPostHoc(
  data,
  p,
  iv = "testiv",
  dv = "testdv",
  label_mappings = NULL,
  sink_to = NULL
)

report_ggstatsplot_posthoc(
  data,
  p,
  iv = "testiv",
  dv = "testdv",
  label_mappings = NULL,
  sink_to = NULL
)

Arguments

Value

Invisibly returns the reported sentence(s) as a character vector; the text is also emitted via message().

LaTeX Requirements

To easily copy and paste the results to your manuscript, the following commands (or similar) must be defined in your LaTeX preamble, as the function outputs commands taking arguments (e.g., ⁠\m{value}⁠):

  \newcommand{\m}[1]{\textit{M}=#1}
  \newcommand{\sd}[1]{\textit{SD}=#1}
  \newcommand{\padj}[1]{$p_{adj}=#1$}
  \newcommand{\padjminor}[1]{$p_{adj}<#1$}

Examples

library(ggstatsplot)
library(dplyr)

# Generate a plot
plt <- ggbetweenstats(mtcars, am, mpg)

# Report stats
reportggstatsplotPostHoc(
  data = mtcars,
  p = plt,
  iv = "am",
  dv = "mpg",
  label_mappings = list("0" = "Automatic", "1" = "Manual")
)

Description

#' To easily copy and paste the results to your manuscript, the following commands must be defined in Latex: \newcommand{\m}{\textit{M=}} \newcommand{\sd}{\textit{SD=}}

Usage

reportMeanAndSD(data, iv = "testiv", dv = "testdv", sink_to = NULL)

report_mean_sd(data, iv = "testiv", dv = "testdv", sink_to = NULL)

Arguments

Value

Invisibly returns the formatted lines as a character vector; the text is also emitted via message().

Examples

example_data <- data.frame(Condition = rep(c("A", "B", "C"),
each = 10), TLX1 = stats::rnorm(30))

reportMeanAndSD(example_data, iv = "Condition", dv = "TLX1")

Report the model produced by nparLD. The model provided must be the model generated by the command 'nparLD' nparLD (see https://CRAN.R-project.org/package=nparLD).

Description

#' Only significant main and interaction effects are reported. P-values are rounded for the third digit and relative treatment effects (RTE) are included when available. Attention: the independent variables of the formula and the term specifying the participant must be factors (i.e., use as.factor()).

Usage

reportNparLD(
  model,
  dv = "Testdependentvariable",
  write_to_clipboard = FALSE,
  sink_to = NULL
)

report_nparld(
  model,
  dv = "Testdependentvariable",
  write_to_clipboard = FALSE,
  sink_to = NULL
)

Arguments

Details

#' To easily copy and paste the results to your manuscript, the following commands must be defined in Latex: \newcommand{\F}{\textit{F=}} \newcommand{\df}{\textit{df=}} \newcommand{\p}{\textit{p=}} \newcommand{\pminor}{\textit{p$<$}}

Value

Invisibly returns the reported sentence(s) as a character vector; the text is also emitted via message().

Examples

if (requireNamespace("nparLD", quietly = TRUE)) {
  # Small toy data set for nparLD
  set.seed(123)
  example_data <- data.frame(
    Subject = factor(rep(1:10, each = 3)),
    Time    = factor(rep(c("T1", "T2", "T3"), times = 10)),
    TLX1    = stats::rnorm(30, mean = 50, sd = 10)
  )

  # Fit nparLD model
  model <- nparLD::nparLD(
    TLX1 ~ Time,
    data        = example_data,
    subject     = "Subject",
    description = FALSE
  )

  # Report the nparLD result
  reportNparLD(model, dv = "TLX1")
  }

Generate the Latex-text based on the NPAV by Lüpsen (see https://www.uni-koeln.de/~luepsen/R/). Only significant main and interaction effects are reported. P-values are rounded for the third digit and partial eta squared values are provided when possible. Attention: the independent variables of the formula and the term specifying the participant must be factors (i.e., use as.factor()).

Description

Deprecated: reportNPAV() will be removed in a future release. Use reportART() with ARTool instead.

Usage

reportNPAV(
  model,
  dv = "Testdependentvariable",
  write_to_clipboard = FALSE,
  sink_to = NULL
)

Arguments

Details

To easily copy and paste the results to your manuscript, the following commands must be defined in Latex: \newcommand{\F}[3]{$F({#1},{#2})={#3}$} \newcommand{\p}{\textit{p=}} \newcommand{\pminor}{\textit{p$<$}}

Value

Invisibly returns the reported sentence(s) as a character vector; the text is also emitted via message().

Examples

model <- data.frame(
  Df = c(1, 1, 10),
  `F value` = c(6.12, 5.01, NA),
  `Pr(>F)` = c(0.033, 0.045, NA),
  check.names = FALSE
)
rownames(model) <- c("Video", "gesture:eHMI", "Residuals")
reportNPAV(model, dv = "mental workload")

Description

This function takes an Excel file with data in a wide format and transforms it to a long format. It includes a customizable "ID" column in the first position and repeats it for each slice. The function identifies sections of columns between markers that start with a user-defined string (default is "videoinfo") and appends those sections under the first section, aligning by column index.

Usage

reshape_data(
  input_filepath,
  sheetName = "Results",
  marker = "videoinfo",
  id_col = "ID",
  output_filepath
)

Arguments

Details

Relevant if you receive data in wide-format but cannot use built-in functionality due to naming (e.g., in LimeSurvey)

Value

None, writes the reshaped data to an Excel file specified by output_filepath.

Examples

if (requireNamespace(c("write_xlsx", "readxl"), quietly = TRUE)) {
  tmp_in  <- tempfile(fileext = ".xlsx")
  tmp_out <- tempfile(fileext = ".xlsx")

  # Minimal toy input that includes your required pieces:
  # an ID column and something that contains the marker value.
  toy <- data.frame(
    ID = c(1, 1, 2, 2),
    section = c("videoinfo", "videoinfo", "videoinfo", "videoinfo"),
    key = c("fps", "duration_s", "fps", "duration_s"),
    value = c(30, 12.3, 25, 9.8),
    stringsAsFactors = FALSE
  )

  writexl::write_xlsx(toy, tmp_in)

  reshape_data(
    input_filepath = tmp_in,
    marker = "videoinfo",
    id_col = "ID",
    output_filepath = tmp_out
  )

  out <- readxl::read_excel(tmp_out)
  print(out)
}

Description

Calculation based on Rosenthal's formula (1994). N stands for the number of measurements. Necessary command:

Usage

rFromNPAV(pvalue, N)

Arguments

Value

Invisibly returns a list with components:

• r: effect size as a numeric scalar.

• z: corresponding z-statistic.

• text: LaTeX-formatted character string that is also sent to the console.

Examples

rFromNPAV(0.02, N = 180)

Description

Calculation based on Rosenthal's formula (1994). N stands for the number of measurements.

Usage

rFromWilcox(wilcoxModel, N)

Arguments

Value

Invisibly returns a list with components:

• r: effect size as a numeric scalar.

• z: corresponding z-statistic.

• text: character string that is also sent to the console.

Examples

set.seed(1)
d <- data.frame(
  group = rep(c("A", "B"), each = 10),
  value = rnorm(20)
)
w <- stats::wilcox.test(value ~ group, data = d, exact = FALSE)
rFromWilcox(w, N = nrow(d))

Description

rFromWilcoxAdjusted

Usage

rFromWilcoxAdjusted(wilcoxModel, N, adjustFactor)

Arguments

Value

Invisibly returns a list with components:

• r: adjusted effect size as a numeric scalar.

• z: adjusted z-statistic.

• text: character string that is also sent to the console.

Examples

set.seed(1)
d <- data.frame(
  group = rep(c("A", "B"), each = 10),
  value = rnorm(20)
)
w <- stats::wilcox.test(value ~ group, data = d, exact = FALSE)
rFromWilcoxAdjusted(w, N = nrow(d), adjustFactor = 2)

Description

Saves a ggplot with sizes matching common two-column conference/journal layouts (e.g., ACM): a single-column figure is 3.33 in wide, a full-width figure 7 in. PDFs are rendered with grDevices::cairo_pdf so that fonts are embedded and unicode glyphs survive.

Usage

save_paper_figure(
  plot = ggplot2::last_plot(),
  filename,
  columns = 1,
  width = NULL,
  height = NULL,
  dpi = 300
)

Arguments

Value

Invisibly returns filename.

Examples

p <- ggplot2::ggplot(mtcars, ggplot2::aes(factor(cyl), mpg)) +
  ggplot2::geom_boxplot()
save_paper_figure(p, file.path(tempdir(), "cyl-mpg.pdf"), columns = 1)

Description

Generating the sum and adding a crossbar.

Usage

stat_sum_df(fun, geom = "crossbar", ...)

Arguments

Value

A ggplot2 layer that can be added to a ggplot object.

Examples

# Simple summary function: use the mean as y, ymin, and ymax
  mean_fun <- function(x) {
    m <- mean(x, na.rm = TRUE)
    data.frame(y = m, ymin = m, ymax = m)
  }

  ggplot2::ggplot(mtcars, ggplot2::aes(x = factor(cyl), y = mpg)) +
    stat_sum_df(mean_fun)