---
title: "Subgroup analysis"
bibliography: '`r system.file("bibliography.bib", package = "brms.mmrm")`'
csl: '`r system.file("asa.csl", package = "brms.mmrm")`'
output:
  rmarkdown::html_vignette:
    toc: true
    number_sections: true
vignette: >
  %\VignetteIndexEntry{Subgroup analysis}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---



This vignette explains how to incorporate a subgroup variable into an MMRM using the `brms.mmrm` package. Here, we assume the subgroup variable has already been selected in advance (perhaps pre-specified in a trial protocol) because interactions are anticipated or of particular interest. Especially if heterogeneous patient populations are studied, it is important to check that the estimated overall effect is broadly applicable to relevant subgroups (@ICH1998, @EMA2019). It is worth noting, however, that subgroup variable selection is a thorough process that requires deep domain knowledge, careful adjustments for multiplicity, and potentially different modeling approaches, all of which belongs outside the scope of this vignette. Limitations of one-variable-at-a-time subgroup analyses to detect treatment effect heterogeneity have been described in the literature [@Kent2023]. For literature on data-driven subgroup identification methods in clinical trials, we refer to @Lipkovich2017 and @Lipkovich2023.

# Data

The subgroup variable must be categorical.


```r
library(brms.mmrm)
library(dplyr)
library(magrittr)
set.seed(0L)
raw_data <- brm_simulate_outline(
  n_group = 3,
  n_subgroup = 2,
  n_patient = 50,
  n_time = 3,
  rate_dropout = 0,
  rate_lapse = 0
) |>
  mutate(response = rnorm(n = n()))

raw_data
#> # A tibble: 900 × 6
#>    patient     time   group   subgroup   missing response
#>    <chr>       <chr>  <chr>   <chr>      <lgl>      <dbl>
#>  1 patient_001 time_1 group_1 subgroup_1 FALSE    1.26   
#>  2 patient_001 time_2 group_1 subgroup_1 FALSE   -0.326  
#>  3 patient_001 time_3 group_1 subgroup_1 FALSE    1.33   
#>  4 patient_002 time_1 group_1 subgroup_1 FALSE    1.27   
#>  5 patient_002 time_2 group_1 subgroup_1 FALSE    0.415  
#>  6 patient_002 time_3 group_1 subgroup_1 FALSE   -1.54   
#>  7 patient_003 time_1 group_1 subgroup_1 FALSE   -0.929  
#>  8 patient_003 time_2 group_1 subgroup_1 FALSE   -0.295  
#>  9 patient_003 time_3 group_1 subgroup_1 FALSE   -0.00577
#> 10 patient_004 time_1 group_1 subgroup_1 FALSE    2.40   
#> # ℹ 890 more rows
```

Each categorical subgroup level should have adequate representation among all treatment groups at all discrete time points. Otherwise, some marginal means of interest may not be estimable.


```r
count(raw_data, group, subgroup, time)
#> # A tibble: 18 × 4
#>    group   subgroup   time       n
#>    <chr>   <chr>      <chr>  <int>
#>  1 group_1 subgroup_1 time_1    50
#>  2 group_1 subgroup_1 time_2    50
#>  3 group_1 subgroup_1 time_3    50
#>  4 group_1 subgroup_2 time_1    50
#>  5 group_1 subgroup_2 time_2    50
#>  6 group_1 subgroup_2 time_3    50
#>  7 group_2 subgroup_1 time_1    50
#>  8 group_2 subgroup_1 time_2    50
#>  9 group_2 subgroup_1 time_3    50
#> 10 group_2 subgroup_2 time_1    50
#> 11 group_2 subgroup_2 time_2    50
#> 12 group_2 subgroup_2 time_3    50
#> 13 group_3 subgroup_1 time_1    50
#> 14 group_3 subgroup_1 time_2    50
#> 15 group_3 subgroup_1 time_3    50
#> 16 group_3 subgroup_2 time_1    50
#> 17 group_3 subgroup_2 time_2    50
#> 18 group_3 subgroup_2 time_3    50
```

When you create the special classed dataset for `brms.mmrm` using `brm_data()`, please supply the name of the subgroup variable and a reference subgroup level. Post-processing functions will use the reference subgroup level to compare pairs of subgroups: for example, the treatment effect of `subgroup_2` minus the treatment effect of the reference subgroup level you choose.


```r
data <- brm_data(
  data = raw_data,
  outcome = "response",
  baseline = NULL,
  group = "group",
  subgroup = "subgroup",
  time = "time",
  patient = "patient",
  reference_group = "group_1",
  reference_subgroup = "subgroup_1",
  reference_time = "time_1"
)

str(data)
#> brms_mm_ [900 × 6] (S3: brms_mmrm_data/tbl_df/tbl/data.frame)
#>  $ patient : chr [1:900] "patient_001" "patient_001" "patient_001" "patient_002" ...
#>  $ time    : chr [1:900] "time_1" "time_2" "time_3" "time_1" ...
#>  $ group   : chr [1:900] "group_1" "group_1" "group_1" "group_1" ...
#>  $ subgroup: chr [1:900] "subgroup_1" "subgroup_1" "subgroup_1" "subgroup_1" ...
#>  $ missing : logi [1:900] FALSE FALSE FALSE FALSE FALSE FALSE ...
#>  $ response: num [1:900] 1.263 -0.326 1.33 1.272 0.415 ...
#>  - attr(*, "brm_outcome")= chr "response"
#>  - attr(*, "brm_group")= chr "group"
#>  - attr(*, "brm_subgroup")= chr "subgroup"
#>  - attr(*, "brm_time")= chr "time"
#>  - attr(*, "brm_patient")= chr "patient"
#>  - attr(*, "brm_covariates")= chr(0) 
#>  - attr(*, "brm_reference_group")= chr "group_1"
#>  - attr(*, "brm_reference_subgroup")= chr "subgroup_1"
#>  - attr(*, "brm_reference_time")= chr "time_1"
```

# Formula

For subgroup analysis, the formula should have terms that include the subgroup variable. All plausible interactions are optional via arguments of `brm_formula()`. For this specific example, we disable all interactions except group-subgroup interaction.


```r
formula_subgroup <- brm_formula(
  data = data,
  group_subgroup_time = FALSE,
  subgroup_time = FALSE
)

formula_subgroup
#> response ~ group + group:subgroup + group:time + subgroup + time + unstr(time = time, gr = patient) 
#> sigma ~ 0 + time
```

To create an analogous non-subgroup reduced model, disable each of the terms that involve the subgroup. This will be useful later on for measuring the impact of the subgroup as a whole, without needing to restrict to a specific level of the subgroup.^[If analyzing change from baseline, you would also need to set `baseline_subgroup = FALSE` and `baseline_subgroup_time = FALSE` in the formula of the reduced model.]


```r
formula_reduced <- brm_formula(
  data = data,
  group_subgroup = FALSE,
  group_subgroup_time = FALSE,
  subgroup = FALSE,
  subgroup_time = FALSE
)

formula_reduced
#> response ~ group + group:time + time + unstr(time = time, gr = patient) 
#> sigma ~ 0 + time
```

# Models

To run the full subgroup and reduced non-subgroup models, use `brm_model()` as usual. Remember to supply the appropriate formula to each case.


```r
model_subgroup <- brm_model(
  data = data,
  formula = formula_subgroup,
  refresh = 0
)
#> Compiling Stan program...
#> Start sampling
```


```r
model_reduced <- brm_model(
  data = data,
  formula = formula_reduced,
  refresh = 0
)
#> Compiling Stan program...
#> Start sampling
```

# Marginals

`brm_marginal_draws()` automatically produces subgroup-specific marginal means if `brm_formula()` declared subgroup-specific fixed effects.^[See the subgroup analysis section of <https://openpharma.github.io/brms.mmrm/articles/inference.html> for an explanation of `average_within_subgroup` in `brm_transform_marginal()`]


```r
draws_subgroup <- brm_marginal_draws(
  model = model_subgroup,
  average_within_subgroup = FALSE
)
```


```r
draws_reduced <- brm_marginal_draws(
  model = model_reduced,
  average_within_subgroup = FALSE
)
```

For `draws_subgroup`, the marginals of the time difference (change from baseline) and treatment difference are now subgroup-specific.


```r
tibble::as_tibble(draws_subgroup$difference_group)
#> # A tibble: 4,000 × 11
#>    .chain .draw .iteration `group_2|subgroup_1|time_2` group_2|subgroup_1|time…¹
#>     <int> <int>      <int>                       <dbl>                     <dbl>
#>  1      1     1          1                     -0.472                    -0.534 
#>  2      1     2          2                     -0.0221                   -0.335 
#>  3      1     3          3                     -0.222                    -0.217 
#>  4      1     4          4                      0.199                    -0.111 
#>  5      1     5          5                      0.0411                   -0.165 
#>  6      1     6          6                     -0.215                    -0.571 
#>  7      1     7          7                      0.0821                   -0.163 
#>  8      1     8          8                     -0.167                    -0.0113
#>  9      1     9          9                      0.282                     0.0544
#> 10      1    10         10                      0.321                    -0.322 
#> # ℹ 3,990 more rows
#> # ℹ abbreviated name: ¹​`group_2|subgroup_1|time_3`
#> # ℹ 6 more variables: `group_2|subgroup_2|time_2` <dbl>,
#> #   `group_2|subgroup_2|time_3` <dbl>, `group_3|subgroup_1|time_2` <dbl>,
#> #   `group_3|subgroup_1|time_3` <dbl>, `group_3|subgroup_2|time_2` <dbl>,
#> #   `group_3|subgroup_2|time_3` <dbl>
```

In addition, there is a new `difference_subgroup` table. The posterior samples in `difference_subgroup` measure the differences between each subgroup level and the reference subgroup level with respect to the treatment effects in `difference_group`.


```r
tibble::as_tibble(draws_subgroup$difference_subgroup)
#> # A tibble: 4,000 × 7
#>    .chain .draw .iteration `group_2|subgroup_2|time_2` group_2|subgroup_2|time…¹
#>     <int> <int>      <int>                       <dbl>                     <dbl>
#>  1      1     1          1                    5.55e-17                         0
#>  2      1     2          2                    4.16e-17                         0
#>  3      1     3          3                    0                                0
#>  4      1     4          4                   -2.78e-17                         0
#>  5      1     5          5                    2.78e-17                         0
#>  6      1     6          6                    0                                0
#>  7      1     7          7                    5.55e-17                         0
#>  8      1     8          8                    2.78e-17                         0
#>  9      1     9          9                    0                                0
#> 10      1    10         10                    0                                0
#> # ℹ 3,990 more rows
#> # ℹ abbreviated name: ¹​`group_2|subgroup_2|time_3`
#> # ℹ 2 more variables: `group_3|subgroup_2|time_2` <dbl>,
#> #   `group_3|subgroup_2|time_3` <dbl>
```

The `brm_marginal_summaries()` and `brm_marginal_probabilities()` are automatically aware of any subgroup-specific marginals from `brm_marginal_draws()`. Notably, `brm_marginal_summaries()` summarizes the subgroup differences in the `difference_subgroup` table from `brm_marginal_draws()`.


```r
summaries_subgroup <- brm_marginal_summaries(
  draws_subgroup,
  level = 0.95
)

summaries_reduced <- brm_marginal_summaries(
  draws_reduced,
  level = 0.95
)

summaries_subgroup
#> # A tibble: 340 × 7
#>    marginal         statistic group   subgroup   time     value    mcse
#>    <chr>            <chr>     <chr>   <chr>      <chr>    <dbl>   <dbl>
#>  1 difference_group lower     group_2 subgroup_1 time_2 -0.300  0.00952
#>  2 difference_group lower     group_2 subgroup_1 time_3 -0.540  0.0137 
#>  3 difference_group lower     group_2 subgroup_2 time_2 -0.300  0.00952
#>  4 difference_group lower     group_2 subgroup_2 time_3 -0.540  0.0137 
#>  5 difference_group lower     group_3 subgroup_1 time_2 -0.130  0.00873
#>  6 difference_group lower     group_3 subgroup_1 time_3 -0.286  0.00976
#>  7 difference_group lower     group_3 subgroup_2 time_2 -0.130  0.00873
#>  8 difference_group lower     group_3 subgroup_2 time_3 -0.286  0.00976
#>  9 difference_group mean      group_2 subgroup_1 time_2  0.0913 0.00439
#> 10 difference_group mean      group_2 subgroup_1 time_3 -0.167  0.00403
#> # ℹ 330 more rows
```

`brm_marginal_probabilities()` still focuses on treatment effects, not on differences between pairs of subgroup levels.


```r
brm_marginal_probabilities(
  draws = draws_subgroup,
  threshold = c(-0.1, 0.1),
  direction = c("greater", "less")
)
#> # A tibble: 16 × 6
#>    direction threshold group   subgroup   time   value
#>    <chr>         <dbl> <chr>   <chr>      <chr>  <dbl>
#>  1 greater        -0.1 group_2 subgroup_1 time_2 0.826
#>  2 greater        -0.1 group_2 subgroup_1 time_3 0.362
#>  3 greater        -0.1 group_2 subgroup_2 time_2 0.826
#>  4 greater        -0.1 group_2 subgroup_2 time_3 0.362
#>  5 greater        -0.1 group_3 subgroup_1 time_2 0.966
#>  6 greater        -0.1 group_3 subgroup_1 time_3 0.846
#>  7 greater        -0.1 group_3 subgroup_2 time_2 0.966
#>  8 greater        -0.1 group_3 subgroup_2 time_3 0.846
#>  9 less            0.1 group_2 subgroup_1 time_2 0.515
#> 10 less            0.1 group_2 subgroup_1 time_3 0.915
#> 11 less            0.1 group_2 subgroup_2 time_2 0.515
#> 12 less            0.1 group_2 subgroup_2 time_3 0.915
#> 13 less            0.1 group_3 subgroup_1 time_2 0.204
#> 14 less            0.1 group_3 subgroup_1 time_3 0.498
#> 15 less            0.1 group_3 subgroup_2 time_2 0.204
#> 16 less            0.1 group_3 subgroup_2 time_3 0.498
```

`brm_marignal_data()` can produce either subgroup-specific or non-subgroup-specific summary statistics.


```r
summaries_data_subgroup <- brm_marginal_data(
  data = data,
  level = 0.95,
  use_subgroup = TRUE
)

summaries_data_subgroup
#> # A tibble: 126 × 5
#>    statistic group   subgroup   time   value
#>    <chr>     <chr>   <chr>      <chr>  <dbl>
#>  1 lower     group_1 subgroup_1 time_1 0.170
#>  2 lower     group_1 subgroup_1 time_2 0.244
#>  3 lower     group_1 subgroup_1 time_3 0.169
#>  4 lower     group_1 subgroup_2 time_1 0.484
#>  5 lower     group_1 subgroup_2 time_2 0.364
#>  6 lower     group_1 subgroup_2 time_3 0.266
#>  7 lower     group_2 subgroup_1 time_1 0.421
#>  8 lower     group_2 subgroup_1 time_2 0.221
#>  9 lower     group_2 subgroup_1 time_3 0.208
#> 10 lower     group_2 subgroup_2 time_1 0.220
#> # ℹ 116 more rows
```


```r
summaries_data_reduced <- brm_marginal_data(
  data = data,
  level = 0.95,
  use_subgroup = FALSE
)

summaries_data_reduced
#> # A tibble: 63 × 4
#>    statistic group   time     value
#>    <chr>     <chr>   <chr>    <dbl>
#>  1 lower     group_1 time_1  0.251 
#>  2 lower     group_1 time_2  0.219 
#>  3 lower     group_1 time_3  0.143 
#>  4 lower     group_2 time_1  0.237 
#>  5 lower     group_2 time_2  0.252 
#>  6 lower     group_2 time_3 -0.0331
#>  7 lower     group_3 time_1  0.104 
#>  8 lower     group_3 time_2  0.332 
#>  9 lower     group_3 time_3  0.110 
#> 10 mean      group_1 time_1  0.0632
#> # ℹ 53 more rows
```

# Model comparison

Metrics from `brms` can compare the full subgroup and reduced non-subgroup model to assess the effect of the subgroup as a whole. We can easily compute the widely applicable information criterion (WAIC) of each model.


```r
brms::waic(model_subgroup)
#> 
#> Computed from 4000 by 900 log-likelihood matrix.
#> 
#>           Estimate   SE
#> elpd_waic  -1275.8 19.9
#> p_waic        20.0  1.0
#> waic        2551.6 39.9
```


```r
brms::waic(model_reduced)
#> 
#> Computed from 4000 by 900 log-likelihood matrix.
#> 
#>           Estimate   SE
#> elpd_waic  -1273.9 20.0
#> p_waic        17.1  0.9
#> waic        2547.8 40.0
```

Likewise, we can compare the models in terms of the expected log predictive density (ELPD) based on approximate Pareto-smoothed leave-one-out cross-validation.


```r
loo_subgroup <- brms::loo(model_subgroup)
loo_reduced <- brms::loo(model_reduced)
```


```r
loo_subgroup
#> 
#> Computed from 4000 by 900 log-likelihood matrix.
#> 
#>          Estimate   SE
#> elpd_loo  -1275.8 19.9
#> p_loo        20.1  1.0
#> looic      2551.6 39.9
#> ------
#> MCSE of elpd_loo is 0.1.
#> MCSE and ESS estimates assume MCMC draws (r_eff in [0.4, 1.6]).
#> 
#> All Pareto k estimates are good (k < 0.7).
#> See help('pareto-k-diagnostic') for details.
```


```r
loo_reduced
#> 
#> Computed from 4000 by 900 log-likelihood matrix.
#> 
#>          Estimate   SE
#> elpd_loo  -1274.0 20.0
#> p_loo        17.2  0.9
#> looic      2547.9 40.0
#> ------
#> MCSE of elpd_loo is 0.1.
#> MCSE and ESS estimates assume MCMC draws (r_eff in [0.4, 1.8]).
#> 
#> All Pareto k estimates are good (k < 0.7).
#> See help('pareto-k-diagnostic') for details.
```


```r
loo::loo_compare(loo_subgroup, loo_reduced)
#>                elpd_diff se_diff
#> model_reduced   0.0       0.0   
#> model_subgroup -1.9       1.6
```

# Visualization

`brm_plot_draws()` is aware of any subgroup-specific marginal means.


```r
brm_plot_draws(draws_subgroup$difference_group)
```

![](subgroup/draws-1.png)

You can adjust visual aesthetics to compare subgroup levels side by side if subgroup level is the primary comparison of interest.


```r
brm_plot_draws(
  draws_subgroup$difference_group,
  axis = "subgroup",
  facet = c("time", "group")
)
```

![](subgroup/drawscustom-1.png)

The following function call compares the subgroup model results against the subgroup data.


```r
brm_plot_compare(
  data = summaries_data_subgroup,
  model = summaries_subgroup,
  marginal = "response"
)
```

![](subgroup/subgroup-vs-data-1.png)

You can adjust plot aesthetics to view subgroup levels side by side as the primary comparison of interest.


```r
brm_plot_compare(
  data = summaries_data_subgroup,
  model = summaries_subgroup,
  marginal = "response",
  compare = "subgroup",
  axis = "time",
  facet = c("group", "source")
)
```

![](subgroup/subgroup-vs-data-levels-1.png)

We can also visually compare the treatment effects of a subgroup level against the marginal treatment effects of the reduced model.


```r
brm_plot_compare(
  subgroup = filter(summaries_subgroup, subgroup == "subgroup_2"),
  reduced = summaries_reduced,
  marginal = "difference_group"
)
```

![](subgroup/reduced-model-comparison-1.png)

Please remember to filter on a single subgroup level. Otherwise, `brm_plot_compare()` throws an informative error to prevent overplotting.


```r
brm_plot_compare(
  subgroup = summaries_subgroup,
  reduced = summaries_reduced,
  marginal = "difference_group"
)
#> Error:
#> ! brm_plot_compare() is omitting the subgroup variable because not all marginal summaries have it, but marginal summaries 'subgroup' have more than one subgroup level. Please either filter on a single subgroup level or make sure all supplied marginal summaries are subgroup-specific.
```

# References