Package 'betareg'

Title:	Beta Regression
Description:	Beta regression for modeling beta-distributed dependent variables on the open unit interval (0, 1), e.g., rates and proportions, see Cribari-Neto and Zeileis (2010) <doi:10.18637/jss.v034.i02>. Moreover, extended-support beta regression models can accommodate dependent variables with boundary observations at 0 and/or 1. For the classical beta regression model, alternative specifications are provided: Bias-corrected and bias-reduced estimation, finite mixture models, and recursive partitioning for beta regression, see Grün, Kosmidis, and Zeileis (2012) <doi:10.18637/jss.v048.i11>.
Authors:	Achim Zeileis [aut, cre] , Francisco Cribari-Neto [aut] , Bettina Grün [aut] , Ioannis Kosmidis [aut] , Alexandre B. Simas [ctb] (earlier version by), Andrea V. Rocha [ctb] (earlier version by)
Maintainer:	Achim Zeileis <[email protected]>
License:	GPL-2 \| GPL-3
Version:	3.2-1
Built:	2024-12-12 07:12:00 UTC
Source:	CRAN

Help Index

The Zero- and/or One-Inflated Beta Distribution in Regression Parameterization
Create a Zero- and/or One-Inflated Beta Distribution
The 4-Parameter Beta Distribution in Regression Parameterization
Create a 4-Parameter Beta Distribution
Finite Mixtures of Beta Regression for Rates and Proportions
The Beta Distribution in Regression Parameterization
Create a Beta Regression Distribution
Beta Regression for Rates and Proportions
Control Parameters for Beta Regression
Beta Regression Trees
Partition-Primed Probability Judgement Task for Car Dealership
Proportion of Household Income Spent on Food
Estimation of Gasoline Yields from Crude Oil
Generalized Leverage Values
Imprecise Probabilities for Sunday Weather and Boeing Stock Task
(No) Myopic Loss Aversion in Adolescents
Confidence of Mock Jurors in Their Verdicts
Diagnostic Plots for betareg Objects
Prediction Method for betareg Objects
Dyslexia and IQ Predicting Reading Accuracy
Residuals Method for betareg Objects
Dependency of Anxiety on Stress
Methods for betareg Objects
Weather Task with Priming and Precise and Imprecise Probabilities
The Extended-Support Beta Distribution
Create an Extended-Support Beta Distribution
The Extended-Support Beta Mixture Distribution
Create an Extended-Support Beta Mixture Distribution

The Zero- and/or One-Inflated Beta Distribution in Regression Parameterization

Description

Density, distribution function, quantile function, and random generation for the zero- and/or one-inflated beta distribution in regression parameterization.

Usage

dbeta01(x, mu, phi, p0 = 0, p1 = 0, log = FALSE)

pbeta01(q, mu, phi, p0 = 0, p1 = 0, lower.tail = TRUE, log.p = FALSE)

qbeta01(p, mu, phi, p0 = 0, p1 = 0, lower.tail = TRUE, log.p = FALSE)

rbeta01(n, mu, phi, p0 = 0, p1 = 0)
dbeta01(x, mu, phi, p0 = 0, p1 = 0, log = FALSE)

pbeta01(q, mu, phi, p0 = 0, p1 = 0, lower.tail = TRUE, log.p = FALSE)

qbeta01(p, mu, phi, p0 = 0, p1 = 0, lower.tail = TRUE, log.p = FALSE)

rbeta01(n, mu, phi, p0 = 0, p1 = 0)

Arguments

`x`, `q`	numeric. Vector of quantiles.
`p`	numeric. Vector of probabilities.
`n`	numeric. Number of observations. If `length(n) > 1`, the length is taken to be the number required.
`mu`	numeric. The mean of the beta distribution (on the open unit interval).
`phi`	numeric. The precision parameter of the beta distribution.
`p0`	numeric. The probability for an observation of zero (often referred to as zero inflation).
`p1`	numeric. The probability for an observation of one (often referred to as one inflation).
`log`, `log.p`	logical. If TRUE, probabilities p are given as log(p).
`lower.tail`	logical. If TRUE (default), probabilities are P[X <= x] otherwise, P[X > x].

Details

The zero- and/or one-inflated beta distribution is obtained by adding point masses at zero and/or one to a standard beta distribution.

Note that the support of the standard beta distribution is the open unit interval where values of exactly zero or one cannot occur. Thus, the inflation jargon is rather misleading as there is no probability that could be inflated. It is rather a hurdle or two-part (or three-part) model.

Value

dbeta01 gives the density, pbeta01 gives the distribution function, qbeta01 gives the quantile function, and rbeta01 generates random deviates.

Create a Zero- and/or One-Inflated Beta Distribution

Description

Class and methods for zero- and/or one-inflated beta distributions in regression specification using the workflow from the distributions3 package.

Usage

Beta01(mu, phi, p0 = 0, p1 = 0)
Beta01(mu, phi, p0 = 0, p1 = 0)

Arguments

`mu`	numeric. The mean of the beta distribution (on the open unit interval).
`phi`	numeric. The precision parameter of the beta distribution.
`p0`	numeric. The probability for an observation of zero (often referred to as zero inflation).
`p1`	numeric. The probability for an observation of one (often referred to as one inflation).

Details

The zero- and/or one-inflated beta distribution is obtained by adding point masses at zero and/or one to a standard beta distribution.

Value

A Beta01 distribution object.

Examples


## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- Beta01(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  p0 = c(0.1, 0, 0),
  p1 = c(0, 0, 0.3)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## point mass probabilities (if any) on boundary
cdf(X, 0, lower.tail = TRUE)
cdf(X, 1, lower.tail = FALSE)

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- Beta01(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  p0 = c(0.1, 0, 0),
  p1 = c(0, 0, 0.3)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## point mass probabilities (if any) on boundary
cdf(X, 0, lower.tail = TRUE)
cdf(X, 1, lower.tail = FALSE)

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

The 4-Parameter Beta Distribution in Regression Parameterization

Description

Density, distribution function, quantile function, and random generation for the 4-parameter beta distribution in regression parameterization.

Usage

dbeta4(x, mu, phi, theta1 = 0, theta2 = 1 - theta1, log = FALSE)

pbeta4(q, mu, phi, theta1 = 0, theta2 = 1 - theta1, lower.tail = TRUE, log.p = FALSE)

qbeta4(p, mu, phi, theta1 = 0, theta2 = 1 - theta1, lower.tail = TRUE, log.p = FALSE)

rbeta4(n, mu, phi, theta1 = 0, theta2 = 1 - theta1)
dbeta4(x, mu, phi, theta1 = 0, theta2 = 1 - theta1, log = FALSE)

pbeta4(q, mu, phi, theta1 = 0, theta2 = 1 - theta1, lower.tail = TRUE, log.p = FALSE)

qbeta4(p, mu, phi, theta1 = 0, theta2 = 1 - theta1, lower.tail = TRUE, log.p = FALSE)

rbeta4(n, mu, phi, theta1 = 0, theta2 = 1 - theta1)

Arguments

`x`, `q`	numeric. Vector of quantiles.
`p`	numeric. Vector of probabilities.
`n`	numeric. Number of observations. If `length(n) > 1`, the length is taken to be the number required.
`mu`	numeric. The mean of the beta distribution that is extended to support [theta1, theta2].
`phi`	numeric. The precision parameter of the beta distribution that is extended to support [theta1, theta2].
`theta1`, `theta2`	numeric. The minimum and maximum, respectively, of the 4-parameter beta distribution. By default a symmetric support is chosen by `theta2 = 1 - theta1` which reduces to the classic beta distribution because of the default `theta1 = 0`.
`log`, `log.p`	logical. If TRUE, probabilities p are given as log(p).
`lower.tail`	logical. If TRUE (default), probabilities are P[X <= x] otherwise, P[X > x].

Details

The distribution is obtained by a linear transformation of a beta-distributed random variable with intercept theta1 and slope theta2 - theta1.

Value

dbeta4 gives the density, pbeta4 gives the distribution function, qbeta4 gives the quantile function, and rbeta4 generates random deviates.

Create a 4-Parameter Beta Distribution

Description

Class and methods for 4-parameter beta distributions in regression specification using the workflow from the distributions3 package.

Usage

Beta4(mu, phi, theta1 = 0, theta2 = 1 - theta1)
Beta4(mu, phi, theta1 = 0, theta2 = 1 - theta1)

Arguments

`mu`	numeric. The mean of the beta distribution that is extended to support [theta1, theta2].
`phi`	numeric. The precision parameter of the beta distribution that is extended to support [theta1, theta2].
`theta1`, `theta2`	numeric. The minimum and maximum, respectively, of the 4-parameter beta distribution. By default a symmetric support is chosen by `theta2 = 1 - theta1` which reduces to the classic beta distribution because of the default `theta1 = 0`.

Details

The distribution is obtained by a linear transformation of a beta-distributed random variable with intercept theta1 and slope theta2 - theta1.

Value

A Beta4 distribution object.

Examples


## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- Beta4(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  theta1 = c(0, -0.1, -0.1),
  theta2 = c(1, 1.1, 1.5)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- Beta4(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  theta1 = c(0, -0.1, -0.1),
  theta2 = c(1, 1.1, 1.5)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

Finite Mixtures of Beta Regression for Rates and Proportions

Description

Fit finite mixtures of beta regression models for rates and proportions via maximum likelihood with the EM algorithm using a parametrization with mean (depending through a link function on the covariates) and precision parameter (called phi).

Usage

betamix(formula, data, k, subset, na.action, weights, offset,
  link = c("logit", "probit", "cloglog", "cauchit", "log",
    "loglog"), link.phi = "log",
  control = betareg.control(...), cluster = NULL,
  FLXconcomitant = NULL, FLXcontrol = list(), verbose = FALSE,
  nstart = if (is.null(cluster)) 3 else 1, which = "BIC", 
  ID, fixed, extra_components, ...)

extraComponent(type = c("uniform", "betareg"), coef, delta,
  link = "logit", link.phi = "log")
betamix(formula, data, k, subset, na.action, weights, offset,
  link = c("logit", "probit", "cloglog", "cauchit", "log",
    "loglog"), link.phi = "log",
  control = betareg.control(...), cluster = NULL,
  FLXconcomitant = NULL, FLXcontrol = list(), verbose = FALSE,
  nstart = if (is.null(cluster)) 3 else 1, which = "BIC", 
  ID, fixed, extra_components, ...)

extraComponent(type = c("uniform", "betareg"), coef, delta,
  link = "logit", link.phi = "log")

Arguments

`formula`	symbolic description of the model (of type `y ~ x` or `y ~ x \| z`; for details see `betareg`).
`data`, `subset`, `na.action`	arguments controlling formula processing via `model.frame`.
`weights`	optional numeric vector of integer case weights.
`offset`	optional numeric vector with an a priori known component to be included in the linear predictor for the mean.
`k`	a vector of integers indicating the number of components of the finite mixture; passed in turn to the `k` argument of `stepFlexmix`.
`link`	character specification of the link function in the mean model (mu). Currently, `"logit"`, `"probit"`, `"cloglog"`, `"cauchit"`, `"log"`, `"loglog"` are supported. Alternatively, an object of class `"link-glm"` can be supplied.
`link.phi`	character specification of the link function in the precision model (phi). Currently, `"identity"`, `"log"`, `"sqrt"` are supported. The default is `"log"` unless `formula` is of type `y ~ x` where the default is `"identity"` (for backward compatibility). Alternatively, an object of class `"link-glm"` can be supplied.
`control`	a list of control arguments specified via `betareg.control`.
`cluster`	Either a matrix with `k` columns of initial cluster membership probabilities for each observation; or a factor or integer vector with the initial cluster assignments of observations at the start of the EM algorithm. Default is random assignment into `k` clusters.
`FLXconcomitant`	concomitant variable model; object of class `FLXP`. Default is the object returned by calling `FLXPconstant`. The argument `FLXconcomitant` can be omitted if `formula` is a three-part formula of type `y ~ x \| z \| w`, where `w` specificies the concomitant variables.
`FLXcontrol`	object of class `"FLXcontrol"` or a named list; controls the EM algorithm and passed in turn to the `control` argument of `flexmix`.
`verbose`	a logical; if `TRUE` progress information is shown for different starts of the EM algorithm.
`nstart`	for each value of `k` run `stepFlexmix` `nstart` times and keep only the solution with maximum likelihood.
`which`	number of model to get if `k` is a vector of integers longer than one. If character, interpreted as number of components or name of an information criterion.
`ID`	grouping variable indicating if observations are from the same individual, i.e. the component membership is restricted to be the same for these observations.
`fixed`	symbolic description of the model for the parameters fixed over components (of type `~ x \| z`).
`extra_components`	a list containing objects returned by `extraComponent()`.
`...`	arguments passed to `betareg.control`.
`type`	specifies if the component follows a uniform distribution or a beta regression model.
`coef`	a vector with the coefficients to determine the midpoint of the uniform distribution or names list with the coefficients for the mean and precision of the beta regression model.
`delta`	numeric; half-length of the interval of the uniform distribution.

Details

The arguments and the model specification are similar to betareg. Internally stepFlexmix is called with suitable arguments to fit the finite mixture model with the EM algorithm. See Grün et al. (2012) for more details.

extra_components is a list where each element corresponds to a component where the parameters are fixed a-priori.

Value

An object of class "flexmix" containing the best model with respect to the log likelihood or the one selected according to which if k is a vector of integers longer than 1.

Author(s)

Bettina Grün and Achim Zeileis

References

Cribari-Neto F, Zeileis A (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Grün B, Kosmidis I, Zeileis A (2012). Extended Beta Regression in R: Shaken, Stirred, Mixed, and Partitioned. Journal of Statistical Software, 48(11), 1–25. doi:10.18637/jss.v048.i11

Grün B, Leisch F (2008). FlexMix Version 2: Finite Mixtures with Concomitant Variables and Varying and Constant Parameters. Journal of Statistical Software, 28(4), 1–35. doi:10.18637/jss.v028.i04

Leisch F (2004). FlexMix: A General Framework for Finite Mixture Models and Latent Class Regression in R. Journal of Statistical Software, 11(8), 1–18. doi:10.18637/jss.v011.i08

Examples

options(digits = 4)

## data with two groups of dyslexic and non-dyslexic children
data("ReadingSkills", package = "betareg")

suppressWarnings(RNGversion("3.5.0"))
set.seed(4040)
## try to capture accuracy ~ iq relationship (without using dyslexia
## information) using two beta regression components and one additional
## extra component for a perfect reading score
rs_mix <- betamix(accuracy ~ iq, data = ReadingSkills, k = 3,
  nstart = 10, extra_components = extraComponent(type = "uniform",
  coef = 0.99, delta = 0.01))

## visualize result
## intensities based on posterior probabilities
prob <- 2 * (posterior(rs_mix)[cbind(1:nrow(ReadingSkills),
   clusters(rs_mix))] - 0.5)
## associated HCL colors
col0 <- hcl(c(260, 0, 130), 65, 45, fixup = FALSE)
col1 <- col0[clusters(rs_mix)]
col2 <- hcl(c(260, 0, 130)[clusters(rs_mix)], 65 * abs(prob)^1.5,
   95 - 50 * abs(prob)^1.5, fixup = FALSE)
## scatter plot
plot(accuracy ~ iq, data = ReadingSkills, col = col2, pch = 19,
   cex = 1.5, xlim = c(-2, 2))
points(accuracy ~ iq, data = ReadingSkills, cex = 1.5, pch = 1,
   col = col1)
## fitted lines
iq <- -30:30/10
cf <- rbind(coef(rs_mix, model = "mean", component = 1:2),
   c(qlogis(0.99), 0))
for(i in 1:3)
   lines(iq, plogis(cf[i, 1] + cf[i, 2] * iq), lwd = 2,
         col = col0[i])

## refit the model including a concomitant variable model using the
## dyslexia information with some noise to avoid complete separation
## between concomitant variable and component memberships
set.seed(4040)
w <- rnorm(nrow(ReadingSkills), 
           c(-1, 1)[as.integer(ReadingSkills$dyslexia)])

## The argument FLXconcomitant can be omitted when specifying
## the model via a three part formula given by
## accuracy ~ iq | 1 | w
## The posteriors from the previously fitted model are used
## for initialization.
library("flexmix")
rs_mix2 <- betamix(accuracy ~ iq, data = ReadingSkills,
  extra_components = extraComponent(type = "uniform",
  coef = 0.99, delta = 0.01), cluster = posterior(rs_mix),
  FLXconcomitant = FLXPmultinom(~w))
coef(rs_mix2, which = "concomitant")
summary(rs_mix2, which = "concomitant")
options(digits = 4)

## data with two groups of dyslexic and non-dyslexic children
data("ReadingSkills", package = "betareg")

suppressWarnings(RNGversion("3.5.0"))
set.seed(4040)
## try to capture accuracy ~ iq relationship (without using dyslexia
## information) using two beta regression components and one additional
## extra component for a perfect reading score
rs_mix <- betamix(accuracy ~ iq, data = ReadingSkills, k = 3,
  nstart = 10, extra_components = extraComponent(type = "uniform",
  coef = 0.99, delta = 0.01))

## visualize result
## intensities based on posterior probabilities
prob <- 2 * (posterior(rs_mix)[cbind(1:nrow(ReadingSkills),
   clusters(rs_mix))] - 0.5)
## associated HCL colors
col0 <- hcl(c(260, 0, 130), 65, 45, fixup = FALSE)
col1 <- col0[clusters(rs_mix)]
col2 <- hcl(c(260, 0, 130)[clusters(rs_mix)], 65 * abs(prob)^1.5,
   95 - 50 * abs(prob)^1.5, fixup = FALSE)
## scatter plot
plot(accuracy ~ iq, data = ReadingSkills, col = col2, pch = 19,
   cex = 1.5, xlim = c(-2, 2))
points(accuracy ~ iq, data = ReadingSkills, cex = 1.5, pch = 1,
   col = col1)
## fitted lines
iq <- -30:30/10
cf <- rbind(coef(rs_mix, model = "mean", component = 1:2),
   c(qlogis(0.99), 0))
for(i in 1:3)
   lines(iq, plogis(cf[i, 1] + cf[i, 2] * iq), lwd = 2,
         col = col0[i])

## refit the model including a concomitant variable model using the
## dyslexia information with some noise to avoid complete separation
## between concomitant variable and component memberships
set.seed(4040)
w <- rnorm(nrow(ReadingSkills), 
           c(-1, 1)[as.integer(ReadingSkills$dyslexia)])

## The argument FLXconcomitant can be omitted when specifying
## the model via a three part formula given by
## accuracy ~ iq | 1 | w
## The posteriors from the previously fitted model are used
## for initialization.
library("flexmix")
rs_mix2 <- betamix(accuracy ~ iq, data = ReadingSkills,
  extra_components = extraComponent(type = "uniform",
  coef = 0.99, delta = 0.01), cluster = posterior(rs_mix),
  FLXconcomitant = FLXPmultinom(~w))
coef(rs_mix2, which = "concomitant")
summary(rs_mix2, which = "concomitant")

The Beta Distribution in Regression Parameterization

Description

Density, distribution function, quantile function, and random generation for the beta distribution in regression parameterization.

Usage

dbetar(x, mu, phi, log = FALSE)

pbetar(q, mu, phi, lower.tail = TRUE, log.p = FALSE)

qbetar(p, mu, phi, lower.tail = TRUE, log.p = FALSE)

rbetar(n, mu, phi)
dbetar(x, mu, phi, log = FALSE)

pbetar(q, mu, phi, lower.tail = TRUE, log.p = FALSE)

qbetar(p, mu, phi, lower.tail = TRUE, log.p = FALSE)

rbetar(n, mu, phi)

Arguments

`x`, `q`	numeric. Vector of quantiles.
`p`	numeric. Vector of probabilities.
`n`	numeric. Number of observations. If `length(n) > 1`, the length is taken to be the number required.
`mu`	numeric. The mean of the beta distribution.
`phi`	numeric. The precision parameter of the beta distribution.
`log`, `log.p`	logical. If TRUE, probabilities p are given as log(p).
`lower.tail`	logical. If TRUE (default), probabilities are P[X <= x] otherwise, P[X > x].

Details

This is the reparameterization of the beta distribution with mean mu and precision phi, as employed in beta regression. The classic parameterization of the beta distribution is obtained by setting shape1 = mu * phi and shape2 = (1 - mu) * phi, respectively.

Value

dbetar gives the density, pbetar gives the distribution function, qbetar gives the quantile function, and rbetar generates random deviates.

Create a Beta Regression Distribution

Description

Class and methods for beta distributions in regression specification using the workflow from the distributions3 package.

Usage

BetaR(mu, phi)
BetaR(mu, phi)

Arguments

`mu`	numeric. The mean of the beta distribution.
`phi`	numeric. The precision parameter of the beta distribution.

Details

Alternative parameterization of the classic beta distribution in terms of its mean mu and precision parameter phi. Thus, the distribution provided by BetaR is equivalent to the Beta distribution with parameters alpha = mu * phi and beta = (1 - mu) * phi.

Value

A BetaR distribution object.

Examples


## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- BetaR(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2)
)

X

## compute moments of the distribution
mean(X)
variance(X)
skewness(X)
kurtosis(X)

## support interval (minimum and maximum)
support(X)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses (except at censoring points)
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- BetaR(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2)
)

X

## compute moments of the distribution
mean(X)
variance(X)
skewness(X)
kurtosis(X)

## support interval (minimum and maximum)
support(X)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses (except at censoring points)
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

Beta Regression for Rates and Proportions

Description

Fit beta regression models for rates and proportions via maximum likelihood using a parametrization with mean (depending through a link function on the covariates) and precision parameter (called phi).

Usage

betareg(formula, data, subset, na.action, weights, offset,
  link = c("logit", "probit", "cloglog", "cauchit", "log", "loglog"),
  link.phi = NULL, type = c("ML", "BC", "BR"), dist = NULL, nu = NULL,
  control = betareg.control(...), model = TRUE,
  y = TRUE, x = FALSE, ...)

betareg.fit(x, y, z = NULL, weights = NULL, offset = NULL,
  link = "logit", link.phi = "log", type = "ML", control = betareg.control(),
  dist = NULL, nu = NULL)
betareg(formula, data, subset, na.action, weights, offset,
  link = c("logit", "probit", "cloglog", "cauchit", "log", "loglog"),
  link.phi = NULL, type = c("ML", "BC", "BR"), dist = NULL, nu = NULL,
  control = betareg.control(...), model = TRUE,
  y = TRUE, x = FALSE, ...)

betareg.fit(x, y, z = NULL, weights = NULL, offset = NULL,
  link = "logit", link.phi = "log", type = "ML", control = betareg.control(),
  dist = NULL, nu = NULL)

Arguments

`formula`	symbolic description of the model, either of type `y ~ x` (mean submodel, constant precision) or `y ~ x \| z` (submodels for both mean and precision); for details see below.
`data`, `subset`, `na.action`	arguments controlling formula processing via `model.frame`.
`weights`	optional numeric vector of case weights.
`offset`	optional numeric vector with an a priori known component to be included in the linear predictor for the mean. In `betareg.fit`, `offset` may also be a list of two offsets for the mean and precision equation, respectively.
`link`	character specification of the link function in the mean model (mu). Currently, `"logit"`, `"probit"`, `"cloglog"`, `"cauchit"`, `"log"`, `"loglog"` are supported. Alternatively, an object of class `"link-glm"` can be supplied.
`link.phi`	character specification of the link function in the precision model (phi). Currently, `"identity"`, `"log"`, `"sqrt"` are supported. The default is `"log"` unless `formula` is of type `y ~ x` where the default is `"identity"` (for backward compatibility). Alternatively, an object of class `"link-glm"` can be supplied.
`type`	character specification of the type of estimator. Currently, maximum likelihood (`"ML"`), ML with bias correction (`"BC"`), and ML with bias reduction (`"BR"`) are supported.
`dist`	character specification of the response distribution. Usually, this does not have to be set by the user because by default the classical `"beta"` distribution is used when all observations for the dependent variable are in (0, 1). In the presence of boundary observations (0 or 1, which cannot be accomodated by `"beta"`) the extended-support beta mixture distribution (`"xbetax"`) is used. Additionally, `dist = "xbeta"` can be used with fixed exceedence parameter `nu`, mostly for testing and debugging purposes.
`nu`	numeric. The fixed value of the expected exceedence parameter `nu` in case the extended-support beta mixture distribution is used. By default, `nu` does not need to be specified and is estimated if needed. So setting `nu` is mostly for profiling and debugging.
`control`	a list of control arguments specified via `betareg.control`.
`model`, `y`, `x`	logicals. If `TRUE` the corresponding components of the fit (model frame, response, model matrix) are returned. For `betareg.fit`, `x` should be a numeric regressor matrix and `y` should be the numeric response vector (with values in (0,1)).
`z`	numeric matrix. Regressor matrix for the precision model, defaulting to an intercept only.
`...`	arguments passed to `betareg.control`.

Details

Beta regression as suggested by Ferrari and Cribari-Neto (2004) and extended by Simas, Barreto-Souza, and Rocha (2010) is implemented in betareg. It is useful in situations where the dependent variable is continuous and restricted to the unit interval (0, 1), e.g., resulting from rates or proportions. It is modeled to be beta-distributed with parametrization using mean and precision parameter (called mu and phi, respectively). The mean mu is linked, as in generalized linear models (GLMs), to the explanatory variables through a link function and a linear predictor. Additionally, the precision parameter phi can be linked to another (potentially overlapping) set of regressors through a second link function, resulting in a model with variable dispersion (see Cribari-Neto and Zeileis 2010). Estimation is performed by default using maximum likelihood (ML) via optim with analytical gradients and starting values from an auxiliary linear regression of the transformed response. Subsequently, the optim result may be enhanced by an additional Fisher scoring iteration using analytical gradients and expected information. Alternative estimation methods are bias-corrected (BC) or bias-reduced (BR) maximum likelihood (see Grün, Kosmidis, and Zeileis 2012). For ML and BC the Fisher scoring is just a refinement to move the gradients even closer to zero and can be disabled by setting fsmaxit = 0 in the control arguments. For BR the Fisher scoring is needed to solve the bias-adjusted estimating equations.

In the beta regression as introduced by Ferrari and Cribari-Neto (2004), the mean of the response is linked to a linear predictor described by y ~ x1 + x2 using a link function while the precision parameter phi is assumed to be constant. Simas et al. (2009) suggest to extend this model by linking phi to an additional set of regressors (z1 + z2, say): In betareg this can be specified in a formula of type y ~ x1 + x2 | z1 + z2 where the regressors in the two parts can be overlapping. In the precision model (for phi), the link function link.phi is used. The default is a "log" link unless no precision model is specified. In the latter case (i.e., when the formula is of type y ~ x1 + x2), the "identity" link is used by default for backward compatibility.

Kosmidis and Zeileis (2024) introduce a generalization of the classic beta regression model with extended support [0, 1]. Specifically, the extended-support beta distribution ("xbeta") leverages an underlying symmetric four-parameter beta distribution with exceedence parameter nu to obtain support [-nu, 1 + nu] that is subsequently censored to [0, 1] in order to obtain point masses at the boundary values 0 and 1. The extended-support beta mixture distribution ("xbetax") is a continuous mixture of extended-support beta distributions where the exceedence parameter follows an exponential distribution with mean nu (rather than a fixed value of nu). The latter "xbetax" specification is used by default in case of boundary observations at 0 and/or 1. The "xbeta" specification with fixed nu is mostly for testing and debugging purposes.

A set of standard extractor functions for fitted model objects is available for objects of class "betareg", including methods to the generic functions print, summary, plot, coef, vcov, logLik, residuals, predict, terms, model.frame, model.matrix, cooks.distance and hatvalues (see influence.measures), gleverage (new generic), estfun and bread (from the sandwich package), and coeftest (from the lmtest package).

See predict.betareg, residuals.betareg, plot.betareg, and summary.betareg for more details on all methods.

The main parameters of interest are the coefficients in the linear predictor of the mean model. The additional parameters in the precision model (phi) can either be treated as full model parameters (default) or as nuisance parameters. In the latter case the estimation does not change, only the reported information in output from print, summary, or coef (among others) will be different. See also betareg.control.

The implemented algorithms for bias correction/reduction follow Kosmidis and Firth (2010). Technical note: In case, either bias correction or reduction is requested, the second derivative of the inverse link function is required for link and link.phi. If the two links are specified by their names (as done by default in betareg), then the "link-glm" objects are enhanced automatically by the required additional d2mu.deta function. However, if a "link-glm" object is supplied directly by the user, it needs to have the d2mu.deta function or, for backward compatibility, dmu.deta.

The original version of the package was written by Alexandre B. Simas and Andrea V. Rocha (up to version 1.2). Starting from version 2.0-0 the code was rewritten by Achim Zeileis.

Value

betareg returns an object of class "betareg", i.e., a list with components as follows. For classic beta regressions (dist = "beta") several elements are lists with the names "mean" and "precision" for the information from the respective submodels. For extended-support beta regressions (dist = "xbetax" or "xbeta"), the corresponding names are "mu" and "phi" because they are not exactly the mean and precision due to the censoring in the response variable.

betareg.fit returns an unclassed list with components up to converged.

`coefficients`	a list with elements `"mean"` (or `"mu"`) and `"precision"` (or `"phi"`) containing the coefficients from the respective submodels and for extended-support beta regressions an additional element `"nu"`,
`residuals`	a vector of raw residuals (observed - fitted),
`fitted.values`	a vector of fitted means,
`optim`	output from the `optim` call for maximizing the log-likelihood(s),
`method`	the method argument passed to the `optim` call,
`control`	the control arguments passed to the `optim` call,
`start`	the starting values for the parameters passed to the `optim` call,
`weights`	the weights used (if any),
`offset`	a list of offset vectors used (if any),
`n`	number of observations,
`nobs`	number of observations with non-zero weights,
`df.null`	residual degrees of freedom in the null model (constant mean and dispersion), i.e., `n - 2`,
`df.residual`	residual degrees of freedom in the fitted model,
`phi`	logical indicating whether the precision (phi) coefficients will be treated as full model parameters or nuisance parameters in subsequent calls to `print`, `summary`, `coef` etc.,
`loglik`	log-likelihood of the fitted model,
`vcov`	covariance matrix of all parameters in the model,
`pseudo.r.squared`	pseudo R-squared value (squared correlation of linear predictor and link-transformed response),
`link`	a list with elements `"mean"` (or `"mu"`) and `"precision"` (or `"phi"`) containing the link objects for the respective submodels,
`converged`	logical indicating successful convergence of `optim`,
`call`	the original function call,
`formula`	the original formula,
`terms`	a list with elements `"mean"` (or `"mu"`), `"precision"` (or `"phi"`) and `"full"` containing the terms objects for the respective models,
`levels`	a list with elements `"mean"` (or `"mu"`), `"precision"` (or `"phi"`) and `"full"` containing the levels of the categorical regressors,
`contrasts`	a list with elements `"mean"` (or `"mu"`) and `"precision"` (or `"phi"`) containing the contrasts corresponding to `levels` from the respective models,
`model`	the full model frame (if `model = TRUE`),
`y`	the response proportion vector (if `y = TRUE`),
`x`	a list with elements `"mean"` (or `"mu"`) and `"precision"` (or `"phi"`) containing the model matrices from the respective models (if `x = TRUE`).

References

Cribari-Neto F, Zeileis A (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Ferrari SLP, Cribari-Neto F (2004). Beta Regression for Modeling Rates and Proportions. Journal of Applied Statistics, 31(7), 799–815.

Grün B, Kosmidis I, Zeileis A (2012). Extended Beta Regression in R: Shaken, Stirred, Mixed, and Partitioned. Journal of Statistical Software, 48(11), 1–25. doi:10.18637/jss.v048.i11

Kosmidis I, Firth D (2010). A Generic Algorithm for Reducing Bias in Parametric Estimation. Electronic Journal of Statistics, 4, 1097–1112.

Kosmidis I, Zeileis A (2024). Extended-Support Beta Regression for [0, 1] Responses. 2409.07233, arXiv.org E-Print Archive. doi:10.48550/arXiv.2409.07233

Simas AB, Barreto-Souza W, Rocha AV (2010). Improved Estimators for a General Class of Beta Regression Models. Computational Statistics & Data Analysis, 54(2), 348–366.

Examples

options(digits = 4)

## Section 4 from Ferrari and Cribari-Neto (2004)
data("GasolineYield", package = "betareg")
data("FoodExpenditure", package = "betareg")

## Table 1
gy <- betareg(yield ~ batch + temp, data = GasolineYield)
summary(gy)

## Table 2
fe_lin <- lm(I(food/income) ~ income + persons, data = FoodExpenditure)
library("lmtest")
bptest(fe_lin)
fe_beta <- betareg(I(food/income) ~ income + persons, data = FoodExpenditure)
summary(fe_beta)

## nested model comparisons via Wald and LR tests
fe_beta2 <- betareg(I(food/income) ~ income, data = FoodExpenditure)
lrtest(fe_beta, fe_beta2)
waldtest(fe_beta, fe_beta2)


## Section 3 from online supplements to Simas et al. (2010)
## mean model as in gy above
## precision model with regressor temp
gy2 <- betareg(yield ~ batch + temp | temp, data = GasolineYield)

## MLE column in Table 19
summary(gy2)

## LRT row in Table 18
lrtest(gy, gy2)
options(digits = 4)

## Section 4 from Ferrari and Cribari-Neto (2004)
data("GasolineYield", package = "betareg")
data("FoodExpenditure", package = "betareg")

## Table 1
gy <- betareg(yield ~ batch + temp, data = GasolineYield)
summary(gy)

## Table 2
fe_lin <- lm(I(food/income) ~ income + persons, data = FoodExpenditure)
library("lmtest")
bptest(fe_lin)
fe_beta <- betareg(I(food/income) ~ income + persons, data = FoodExpenditure)
summary(fe_beta)

## nested model comparisons via Wald and LR tests
fe_beta2 <- betareg(I(food/income) ~ income, data = FoodExpenditure)
lrtest(fe_beta, fe_beta2)
waldtest(fe_beta, fe_beta2)


## Section 3 from online supplements to Simas et al. (2010)
## mean model as in gy above
## precision model with regressor temp
gy2 <- betareg(yield ~ batch + temp | temp, data = GasolineYield)

## MLE column in Table 19
summary(gy2)

## LRT row in Table 18
lrtest(gy, gy2)

Control Parameters for Beta Regression

Description

Various parameters that control fitting of beta regression models using betareg.

Usage

betareg.control(phi = TRUE, method = "BFGS", maxit = 5000,
  gradient = NULL, hessian = FALSE, trace = FALSE, start = NULL,
  fsmaxit = 200, fstol = 1e-8, quad = 20, ...)
betareg.control(phi = TRUE, method = "BFGS", maxit = 5000,
  gradient = NULL, hessian = FALSE, trace = FALSE, start = NULL,
  fsmaxit = 200, fstol = 1e-8, quad = 20, ...)

Arguments

`phi`	logical indicating whether the precision parameter phi should be treated as a full model parameter (`TRUE`, default) or as a nuisance parameter.
`method`	characters string specifying the `method` argument passed to `optim`. Additionally, `method = "nlminb"` can be used to employ `nlminb`, instead.
`maxit`	integer specifying the `maxit` argument (maximal number of iterations) passed to `optim`.
`trace`	logical or integer controlling whether tracing information on the progress of the optimization should be produced (passed to `optim`).
`gradient`	logical. Should the analytical gradient be used for optimizing the log-likelihood? If set to `FALSE` a finite-difference approximation is used instead. The default of `NULL` signals that analytical gradients are only used for the classical `"beta"` distribution but not for `"xbetax"` or `"xbeta"`.
`hessian`	logical. Should the numerical Hessian matrix from the `optim` output be used for estimation of the covariance matrix? By default the analytical solution is employed. For details see below.
`start`	an optional vector with starting values for all parameters (including phi).
`fsmaxit`	integer specifying maximal number of additional (quasi) Fisher scoring iterations. For details see below.
`fstol`	numeric tolerance for convergence in (quasi) Fisher scoring. For details see below.
`quad`	numeric. The number of quadrature points for numeric integration in case of `dist = "xbetax"` is used in the beta regression.
`...`	arguments passed to `optim`.

Details

All parameters in betareg are estimated by maximum likelihood using optim with control options set in betareg.control. Most arguments are passed on directly to optim, and start controls how optim is called.

After the optim maximization, an additional (quasi) Fisher scoring can be perfomed to further enhance the result or to perform additional bias reduction. If fsmaxit is greater than zero, this additional optimization is performed and it converges if the threshold fstol is attained for the cross-product of the step size.

Starting values can be supplied via start or estimated by lm.wfit, using the link-transformed response. Covariances are in general derived analytically. Only if type = "ML" and hessian = TRUE, they are determined numerically using the Hessian matrix returned by optim. In the latter case no Fisher scoring iterations are performed.

The main parameters of interest are the coefficients in the linear predictor of the model and the additional precision parameter phi which can either be treated as a full model parameter (default) or as a nuisance parameter. In the latter case the estimation does not change, only the reported information in output from print, summary, or coef (among others) will be different. See also examples.

Value

A list with the arguments specified.

Examples

options(digits = 4)

data("GasolineYield", package = "betareg")

## regression with phi as full model parameter
gy1 <- betareg(yield ~ batch + temp, data = GasolineYield)
gy1

## regression with phi as nuisance parameter
gy2 <- betareg(yield ~ batch + temp, data = GasolineYield, phi = FALSE)
gy2

## compare reported output
coef(gy1)
coef(gy2)
summary(gy1)
summary(gy2)
options(digits = 4)

data("GasolineYield", package = "betareg")

## regression with phi as full model parameter
gy1 <- betareg(yield ~ batch + temp, data = GasolineYield)
gy1

## regression with phi as nuisance parameter
gy2 <- betareg(yield ~ batch + temp, data = GasolineYield, phi = FALSE)
gy2

## compare reported output
coef(gy1)
coef(gy2)
summary(gy1)
summary(gy2)

Beta Regression Trees

Description

Fit beta regression trees via model-based recursive partitioning.

Usage

betatree(formula, partition,
  data, subset = NULL, na.action = na.omit, weights, offset, cluster,
  link = "logit", link.phi = "log", control = betareg.control(),
  ...)
betatree(formula, partition,
  data, subset = NULL, na.action = na.omit, weights, offset, cluster,
  link = "logit", link.phi = "log", control = betareg.control(),
  ...)

Arguments

`formula`	symbolic description of the model of type `y ~ x` or `y ~ x \| z`, specifying the variables influencing mean and precision of `y`, respectively. For details see `betareg`.
`partition`	symbolic description of the partitioning variables, e.g., `~ p1 + p2`. The argument `partition` can be omitted if `formula` is a three-part formula of type `y ~ x \| z \| p1 + p2`.
`data`, `subset`, `na.action`, `weights`, `offset`, `cluster`	arguments controlling data/model processing passed to `mob`.
`link`	character specification of the link function in the mean model (mu). Currently, `"logit"`, `"probit"`, `"cloglog"`, `"cauchit"`, `"log"`, `"loglog"` are supported. Alternatively, an object of class `"link-glm"` can be supplied.
`link.phi`	character specification of the link function in the precision model (phi). Currently, `"identity"`, `"log"`, `"sqrt"` are supported. Alternatively, an object of class `"link-glm"` can be supplied.
`control`	a list of control arguments for the beta regression specified via `betareg.control`.
`...`	further control arguments for the recursive partitioning passed to `mob_control`.

Details

Beta regression trees are an application of model-based recursive partitioning (implemented in mob, see Zeileis et al. 2008) to beta regression (implemented in betareg, see Cribari-Neto and Zeileis 2010). See also Grün at al. (2012) for more details.

Various methods are provided for "betatree" objects, most of them inherit their behavior from "mob" objects (e.g., print, summary, coef, etc.). The plot method employs the node_bivplot panel-generating function.

Value

betatree() returns an object of S3 class "betatree" which inherits from "modelparty".

References

Cribari-Neto F, Zeileis A (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Grün B, Kosmidis I, Zeileis A (2012). Extended Beta Regression in R: Shaken, Stirred, Mixed, and Partitioned. Journal of Statistical Software, 48(11), 1–25. doi:10.18637/jss.v048.i11

Zeileis A, Hothorn T, Hornik K (2008). Model-Based Recursive Partitioning. Journal of Computational and Graphical Statistics, 17(2), 492–514.

Examples

options(digits = 4)
suppressWarnings(RNGversion("3.5.0"))

## data with two groups of dyslexic and non-dyslexic children
data("ReadingSkills", package = "betareg")
## additional random noise (not associated with reading scores)
set.seed(1071)
ReadingSkills$x1 <- rnorm(nrow(ReadingSkills))
ReadingSkills$x2 <- runif(nrow(ReadingSkills))
ReadingSkills$x3 <- factor(rnorm(nrow(ReadingSkills)) > 0)

## fit beta regression tree: in each node
##   - accurcay's mean and precision depends on iq
##   - partitioning is done by dyslexia and the noise variables x1, x2, x3
## only dyslexia is correctly selected for splitting
bt <- betatree(accuracy ~ iq | iq, ~ dyslexia + x1 + x2 + x3,
  data = ReadingSkills, minsize = 10)
plot(bt)

## inspect result
coef(bt)
if(require("strucchange")) sctest(bt)
## IGNORE_RDIFF_BEGIN
summary(bt, node = 2)
summary(bt, node = 3)
## IGNORE_RDIFF_END

## add a numerical variable with relevant information for splitting
ReadingSkills$x4 <- rnorm(nrow(ReadingSkills), c(-1.5, 1.5)[ReadingSkills$dyslexia])

bt2 <- betatree(accuracy ~ iq | iq, ~ x1 + x2 + x3 + x4,
  data = ReadingSkills, minsize = 10)
plot(bt2)

## inspect result
coef(bt2)
if(require("strucchange")) sctest(bt2)
## IGNORE_RDIFF_BEGIN
summary(bt2, node = 2)
summary(bt2, node = 3)
## IGNORE_RDIFF_END
options(digits = 4)
suppressWarnings(RNGversion("3.5.0"))

## data with two groups of dyslexic and non-dyslexic children
data("ReadingSkills", package = "betareg")
## additional random noise (not associated with reading scores)
set.seed(1071)
ReadingSkills$x1 <- rnorm(nrow(ReadingSkills))
ReadingSkills$x2 <- runif(nrow(ReadingSkills))
ReadingSkills$x3 <- factor(rnorm(nrow(ReadingSkills)) > 0)

## fit beta regression tree: in each node
##   - accurcay's mean and precision depends on iq
##   - partitioning is done by dyslexia and the noise variables x1, x2, x3
## only dyslexia is correctly selected for splitting
bt <- betatree(accuracy ~ iq | iq, ~ dyslexia + x1 + x2 + x3,
  data = ReadingSkills, minsize = 10)
plot(bt)

## inspect result
coef(bt)
if(require("strucchange")) sctest(bt)
## IGNORE_RDIFF_BEGIN
summary(bt, node = 2)
summary(bt, node = 3)
## IGNORE_RDIFF_END

## add a numerical variable with relevant information for splitting
ReadingSkills$x4 <- rnorm(nrow(ReadingSkills), c(-1.5, 1.5)[ReadingSkills$dyslexia])

bt2 <- betatree(accuracy ~ iq | iq, ~ x1 + x2 + x3 + x4,
  data = ReadingSkills, minsize = 10)
plot(bt2)

## inspect result
coef(bt2)
if(require("strucchange")) sctest(bt2)
## IGNORE_RDIFF_BEGIN
summary(bt2, node = 2)
summary(bt2, node = 3)
## IGNORE_RDIFF_END

Partition-Primed Probability Judgement Task for Car Dealership

Description

In this study participants were asked to judge how likely it is that a customer trades in a coupe or that a customer buys a car form a specific salesperson out of four possible salespersons.

Usage

data("CarTask", package = "betareg")data("CarTask", package = "betareg")

Format

A data frame with 155 observations on the following 3 variables.

task: a factor with levels Car and Salesperson indicating the condition.
probability: a numeric vector of the estimated probability.
NFCCscale: a numeric vector of the NFCC scale.

Details

All participants in the study were undergraduate students at The Australian National University, some of whom obtained course credit in first-year Psychology for their participation in the study.

The NFCC scale is a combined scale of the Need for Closure and Need for Certainty scales which are strongly correlated.

For task the questions were:

Car: What is the probability that a customer trades in a coupe?
Salesperson: What is the probability that a customer buys a car from Carlos?

Source

Taken from Smithson et al. (2011) supplements.

References

Smithson, M., Merkle, E.C., and Verkuilen, J. (2011). Beta Regression Finite Mixture Models of Polarization and Priming. Journal of Educational and Behavioral Statistics, 36(6), 804–831. doi:10.3102/1076998610396893

Smithson, M., and Segale, C. (2009). Partition Priming in Judgments of Imprecise Probabilities. Journal of Statistical Theory and Practice, 3(1), 169–181.

Examples

data("CarTask", package = "betareg")
library("flexmix")
car_betamix <- betamix(probability ~ 1, data = CarTask, k = 3,
  extra_components = list(extraComponent(type = "uniform", coef = 1/2,
  delta = 0.01), extraComponent(type = "uniform", coef = 1/4, delta = 0.01)),
  FLXconcomitant = FLXPmultinom(~ task))
data("CarTask", package = "betareg")
library("flexmix")
car_betamix <- betamix(probability ~ 1, data = CarTask, k = 3,
  extra_components = list(extraComponent(type = "uniform", coef = 1/2,
  delta = 0.01), extraComponent(type = "uniform", coef = 1/4, delta = 0.01)),
  FLXconcomitant = FLXPmultinom(~ task))

Proportion of Household Income Spent on Food

Description

Data on proportion of income spent on food for a random sample of 38 households in a large US city.

Usage

data("FoodExpenditure", package = "betareg")data("FoodExpenditure", package = "betareg")

Format

A data frame containing 38 observations on 3 variables.

food: household expenditures for food.
income: household income.
persons: number of persons living in household.

Source

Taken from Griffiths et al. (1993, Table 15.4).

References

Cribari-Neto, F., and Zeileis, A. (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Ferrari, S.L.P., and Cribari-Neto, F. (2004). Beta Regression for Modeling Rates and Proportions. Journal of Applied Statistics, 31(7), 799–815.

Griffiths, W.E., Hill, R.C., and Judge, G.G. (1993). Learning and Practicing Econometrics New York: John Wiley and Sons.

Examples

data("FoodExpenditure", package = "betareg")

## Ferrari and Cribari-Neto (2004)
## Section 4
fe_lin <- lm(I(food/income) ~ income + persons, data = FoodExpenditure)
library("lmtest")
bptest(fe_lin)

## Table 2
fe_beta <- betareg(I(food/income) ~ income + persons, data = FoodExpenditure)
summary(fe_beta)
data("FoodExpenditure", package = "betareg")

## Ferrari and Cribari-Neto (2004)
## Section 4
fe_lin <- lm(I(food/income) ~ income + persons, data = FoodExpenditure)
library("lmtest")
bptest(fe_lin)

## Table 2
fe_beta <- betareg(I(food/income) ~ income + persons, data = FoodExpenditure)
summary(fe_beta)

Estimation of Gasoline Yields from Crude Oil

Description

Operational data of the proportion of crude oil converted to gasoline after distillation and fractionation.

Usage

data("GasolineYield", package = "betareg")data("GasolineYield", package = "betareg")

Format

A data frame containing 32 observations on 6 variables.

yield: proportion of crude oil converted to gasoline after distillation and fractionation.
gravity: crude oil gravity (degrees API).
pressure: vapor pressure of crude oil (lbf/in2).
temp10: temperature (degrees F) at which 10 percent of crude oil has vaporized.
temp: temperature (degrees F) at which all gasoline has vaporized.
batch: factor indicating unique batch of conditions gravity, pressure, and temp10.

Details

This dataset was collected by Prater (1956), its dependent variable is the proportion of crude oil after distillation and fractionation. This dataset was analyzed by Atkinson (1985), who used the linear regression model and noted that there is “indication that the error distribution is not quite symmetrical, giving rise to some unduly large and small residuals” (p. 60).

The dataset contains 32 observations on the response and on the independent variables. It has been noted (Daniel and Wood, 1971, Chapter 8) that there are only ten sets of values of the first three explanatory variables which correspond to ten different crudes and were subjected to experimentally controlled distillation conditions. These conditions are captured in variable batch and the data were ordered according to the ascending order of temp10.

Source

Taken from Prater (1956).

References

Atkinson, A.C. (1985). Plots, Transformations and Regression: An Introduction to Graphical Methods of Diagnostic Regression Analysis. New York: Oxford University Press.

Cribari-Neto, F., and Zeileis, A. (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Daniel, C., and Wood, F.S. (1971). Fitting Equations to Data. New York: John Wiley and Sons.

Ferrari, S.L.P., and Cribari-Neto, F. (2004). Beta Regression for Modeling Rates and Proportions. Journal of Applied Statistics, 31(7), 799–815.

Prater, N.H. (1956). Estimate Gasoline Yields from Crudes. Petroleum Refiner, 35(5), 236–238.

Examples

## IGNORE_RDIFF_BEGIN
data("GasolineYield", package = "betareg")

gy1 <- betareg(yield ~ gravity + pressure + temp10 + temp, data = GasolineYield)
summary(gy1)

## Ferrari and Cribari-Neto (2004)
gy2 <- betareg(yield ~ batch + temp, data = GasolineYield)
## Table 1
summary(gy2)
## Figure 2
par(mfrow = c(3, 2))
plot(gy2, which = 1, type = "pearson", sub.caption = "")
plot(gy2, which = 1, type = "deviance", sub.caption = "")
plot(gy2, which = 5, type = "deviance", sub.caption = "")
plot(gy2, which = 4, type = "pearson", sub.caption = "")
plot(gy2, which = 2:3)
par(mfrow = c(1, 1))

## exclude 4th observation
gy2a <- update(gy2, subset = -4)
gy2a
summary(gy2a)
## IGNORE_RDIFF_END
## IGNORE_RDIFF_BEGIN
data("GasolineYield", package = "betareg")

gy1 <- betareg(yield ~ gravity + pressure + temp10 + temp, data = GasolineYield)
summary(gy1)

## Ferrari and Cribari-Neto (2004)
gy2 <- betareg(yield ~ batch + temp, data = GasolineYield)
## Table 1
summary(gy2)
## Figure 2
par(mfrow = c(3, 2))
plot(gy2, which = 1, type = "pearson", sub.caption = "")
plot(gy2, which = 1, type = "deviance", sub.caption = "")
plot(gy2, which = 5, type = "deviance", sub.caption = "")
plot(gy2, which = 4, type = "pearson", sub.caption = "")
plot(gy2, which = 2:3)
par(mfrow = c(1, 1))

## exclude 4th observation
gy2a <- update(gy2, subset = -4)
gy2a
summary(gy2a)
## IGNORE_RDIFF_END

Generalized Leverage Values

Description

Compute the generalized leverages values for fitted models.

Usage

gleverage(model, ...)
gleverage(model, ...)

Arguments

`model`	a model object.
`...`	further arguments passed to methods.

Value

gleverage is a new generic for computing generalized leverage values as suggested by Wei, Hu, and Fung (1998). Currently, there is only a method for betareg models, implementing the formulas from Rocha and Simas (2011) which are consistent with the formulas from Ferrari and Cribari-Neto (2004) for the fixed dispersion case.

Currently, the vector of generalized leverages requires computations and storage of order $n \times n$ .

References

Ferrari SLP, Cribari-Neto F (2004). Beta Regression for Modeling Rates and Proportions. Journal of Applied Statistics, 31(7), 799–815.

Rocha AV, Simas AB (2011). Influence Diagnostics in a General Class of Beta Regression Models. Test, 20(1), 95–119. doi:10.1007/s11749-010-0189-z

Wei BC, Hu, YQ, Fung WK (1998). Generalized Leverage and Its Applications. Scandinavian Journal of Statistics, 25, 25–37.

Examples

options(digits = 4)
data("GasolineYield", package = "betareg")
gy <- betareg(yield ~ batch + temp, data = GasolineYield)
gleverage(gy)
options(digits = 4)
data("GasolineYield", package = "betareg")
gy <- betareg(yield ~ batch + temp, data = GasolineYield)
gleverage(gy)

Imprecise Probabilities for Sunday Weather and Boeing Stock Task

Description

In this study participants were asked to estimate upper and lower probabilities for event to occur and not to occur.

Usage

data("ImpreciseTask", package = "betareg")data("ImpreciseTask", package = "betareg")

Format

A data frame with 242 observations on the following 3 variables.

task: a factor with levels Boeing stock and Sunday weather.
location: a numeric vector of the average of the lower estimate for the event not to occur and the upper estimate for the event to occur.
difference: a numeric vector of the differences of the lower and upper estimate for the event to occur.

Details

All participants in the study were either first- or second-year undergraduate students in psychology, none of whom had a strong background in probability or were familiar with imprecise probability theories.

For the sunday weather task see WeatherTask. For the Boeing stock task participants were asked to estimate the probability that Boeing's stock would rise more than those in a list of 30 companies.

For each task participants were asked to provide lower and upper estimates for the event to occur and not to occur.

Source

Taken from Smithson et al. (2011) supplements.

References

Smithson M, Merkle EC, Verkuilen J (2011). Beta Regression Finite Mixture Models of Polarization and Priming. Journal of Educational and Behavioral Statistics, 36(6), 804–831. doi:10.3102/1076998610396893

Smithson M, Segale C (2009). Partition Priming in Judgments of Imprecise Probabilities. Journal of Statistical Theory and Practice, 3(1), 169–181.

Examples

data("ImpreciseTask", package = "betareg")
library("flexmix")
wt_betamix <- betamix(location ~ difference * task, data = ImpreciseTask, k = 2,
  extra_components = extraComponent(type = "betareg", coef =
    list(mean = 0, precision = 8)),
  FLXconcomitant = FLXPmultinom(~ task))
data("ImpreciseTask", package = "betareg")
library("flexmix")
wt_betamix <- betamix(location ~ difference * task, data = ImpreciseTask, k = 2,
  extra_components = extraComponent(type = "betareg", coef =
    list(mean = 0, precision = 8)),
  FLXconcomitant = FLXPmultinom(~ task))

(No) Myopic Loss Aversion in Adolescents

Description

Data from a behavioral economics experiment assessing the extent of myopic loss aversion among adolescents (mostly aged 11 to 19).

Usage

data("LossAversion", package = "betareg")data("LossAversion", package = "betareg")

Format

A data frame containing 570 observations on 7 variables.

invest: numeric. Average proportion of tokens invested across all 9 rounds.
gender: factor. Gender of the player (or team of players).
male: factor. Was (at least one of) the player(s) male (in the team)?
age: numeric. Age in years (averaged for teams).
treatment: factor. Type of treatment: long vs. short.
grade: factor. School grades: 6-8 (11-14 years) vs. 10-12 (15-18 years).
arrangement: factor. Is the player a single player or team of two?

Details

Myopic loss aversion is a phenomenon in behavioral economics, where individuals do not behave economically rationally when making short-term decisions under uncertainty. Example: In lotteries with positive expected payouts investments are lower than the maximum possible (loss aversion). This effect is enhanced for short-term investments (myopia or short-sightedness).

The data in LossAversion were collected by Matthias Sutter and Daniela Glätzle-Rützler (Universität Innsbruck) in an experiment with high-school students in Tyrol, Austria (Schwaz and Innsbruck). The students could invest X tokens (0-100) in each of 9 rounds in a lottery. The payouts were 100 + 2.5 * X tokens with probability 1/3 and 100 - X tokens with probability 2/3. Thus, the expected payouts were 100 + 1/6 * X tokens. Depending on the treatment in the experiment, the investments could either be modified in each round (treatment: "short") or only in round 1, 4, 7 (treatment "long"). Decisions were either made alone or in teams of two. The tokens were converted to monetary payouts using a conversion of EUR 0.5 per 100 tokens for lower grades (Unterstufe, 6-8) or EUR 1.0 per 100 tokens for upper grades (Oberstufe, 10-12).

From the myopic loss aversion literature (on adults) one would expect that the investments of the players (either single players or teams of two) would depend on all factors: Investments should be

lower in the short treatment (which would indicate myopia),
higher for teams (indicating a reduction in loss aversion),
higher for (teams with) male players,
increase with age/grade.

See Glätzle-Rützler et al. (2015) for more details and references to the literature. In their original analysis, the investments are analyzes using a panel structure (i.e., 9 separate investments for each team). Here, the data are averaged across rounds for each player, leading to qualitatively similar results. The full data along with replication materials are available in the Harvard Dataverse.

Kosmidis and Zeileis (2024) revisit the data using extended-support beta mixture (XBX) regression, which can simultaneously capture both the probability of rational behavior and the mean amount of loss aversion.

Source

Glätzle-Rützler D, Sutter M, Zeileis A (2020). Replication Data for: No Myopic Loss Aversion in Adolescents? - An Experimental Note. Harvard Dataverse, UNF:6:6hVtbHavJAFYfL7dDl7jqA==. doi:10.7910/DVN/IHFZAK

References

Glätzle-Rützler D, Sutter M, Zeileis A (2015). No Myopic Loss Aversion in Adolescents? – An Experimental Note. Journal of Economic Behavior & Organization, 111, 169–176. doi:10.1016/j.jebo.2014.12.021

Kosmidis I, Zeileis A (2024). Extended-Support Beta Regression for [0, 1] Responses. 2409.07233, arXiv.org E-Print Archive. doi:10.48550/arXiv.2409.07233

Examples

options(digits = 4)

## data and add ad-hoc scaling (a la Smithson & Verkuilen)
data("LossAversion", package = "betareg")
LossAversion <- transform(LossAversion,
  invests = (invest * (nrow(LossAversion) - 1) + 0.5)/nrow(LossAversion))


## models: normal (with constant variance), beta, extended-support beta mixture
la_n <- lm(invest ~ grade * (arrangement + age) + male, data = LossAversion)
summary(la_n)


la_b <- betareg(invests ~ grade * (arrangement + age) + male | arrangement + male + grade,
  data = LossAversion)
summary(la_b)

la_xbx <- betareg(invest ~ grade * (arrangement + age) + male | arrangement + male + grade,
  data = LossAversion)
summary(la_xbx)

## coefficients in XBX are typically somewhat shrunken compared to beta
cbind(XBX = coef(la_xbx), Beta = c(coef(la_b), NA))


## predictions on subset: (at least one) male players, higher grades, around age 16
la <- subset(LossAversion, male == "yes" & grade == "10-12" & age >= 15 &  age <= 17)
la_nd <- data.frame(arrangement = c("single", "team"), male = "yes", age = 16, grade = "10-12")

## empirical vs fitted E(Y)
la_nd$mean_emp <- aggregate(invest ~ arrangement, data = la, FUN = mean)$invest 
la_nd$mean_n <- predict(la_n, la_nd)
la_nd$mean_b <- predict(la_b, la_nd)
la_nd$mean_xbx <- predict(la_xbx, la_nd)
la_nd

## visualization: all means rather similar
la_mod <- c("Emp", "N", "B", "XBX")
la_col <- unname(palette.colors())[c(1, 2, 4, 4)]
la_lty <- c(1, 5, 5, 1)
matplot(la_nd[, paste0("mean_", tolower(la_mod))], type = "l",
  col = la_col, lty = la_lty, lwd = 2, ylab = "E(Y)", main = "E(Y)", xaxt = "n")
axis(1, at = 1:2, labels = la_nd$arrangement)
legend("topleft", la_mod, col = la_col, lty = la_lty, lwd = 2, bty = "n")


## empirical vs. fitted P(Y > 0.95)
la_nd$prob_emp <- aggregate(invest >= 0.95 ~ arrangement, data = la, FUN = mean)$invest
la_nd$prob_n <- pnorm(0.95, mean = la_nd$mean_n, sd = summary(la_n)$sigma, lower.tail = FALSE)
la_nd$prob_b <- 1 - predict(la_b, la_nd, type = "probability", at = 0.95)
la_nd$prob_xbx <- 1 - predict(la_xbx, la_nd, type = "probability", at = 0.95)
la_nd[, -(5:8)]

## visualization: only XBX works well
matplot(la_nd[, paste0("prob_", tolower(la_mod))], type = "l",
  col = la_col, lty = la_lty, lwd = 2, ylab = "P(Y > 0.95)", main = "P(Y > 0.95)", xaxt = "n")
axis(1, at = 1:2, labels = la_nd$arrangement)
legend("topleft", la_mod, col = la_col, lty = la_lty, lwd = 2, bty = "n")

options(digits = 4)

## data and add ad-hoc scaling (a la Smithson & Verkuilen)
data("LossAversion", package = "betareg")
LossAversion <- transform(LossAversion,
  invests = (invest * (nrow(LossAversion) - 1) + 0.5)/nrow(LossAversion))


## models: normal (with constant variance), beta, extended-support beta mixture
la_n <- lm(invest ~ grade * (arrangement + age) + male, data = LossAversion)
summary(la_n)


la_b <- betareg(invests ~ grade * (arrangement + age) + male | arrangement + male + grade,
  data = LossAversion)
summary(la_b)

la_xbx <- betareg(invest ~ grade * (arrangement + age) + male | arrangement + male + grade,
  data = LossAversion)
summary(la_xbx)

## coefficients in XBX are typically somewhat shrunken compared to beta
cbind(XBX = coef(la_xbx), Beta = c(coef(la_b), NA))


## predictions on subset: (at least one) male players, higher grades, around age 16
la <- subset(LossAversion, male == "yes" & grade == "10-12" & age >= 15 &  age <= 17)
la_nd <- data.frame(arrangement = c("single", "team"), male = "yes", age = 16, grade = "10-12")

## empirical vs fitted E(Y)
la_nd$mean_emp <- aggregate(invest ~ arrangement, data = la, FUN = mean)$invest 
la_nd$mean_n <- predict(la_n, la_nd)
la_nd$mean_b <- predict(la_b, la_nd)
la_nd$mean_xbx <- predict(la_xbx, la_nd)
la_nd

## visualization: all means rather similar
la_mod <- c("Emp", "N", "B", "XBX")
la_col <- unname(palette.colors())[c(1, 2, 4, 4)]
la_lty <- c(1, 5, 5, 1)
matplot(la_nd[, paste0("mean_", tolower(la_mod))], type = "l",
  col = la_col, lty = la_lty, lwd = 2, ylab = "E(Y)", main = "E(Y)", xaxt = "n")
axis(1, at = 1:2, labels = la_nd$arrangement)
legend("topleft", la_mod, col = la_col, lty = la_lty, lwd = 2, bty = "n")


## empirical vs. fitted P(Y > 0.95)
la_nd$prob_emp <- aggregate(invest >= 0.95 ~ arrangement, data = la, FUN = mean)$invest
la_nd$prob_n <- pnorm(0.95, mean = la_nd$mean_n, sd = summary(la_n)$sigma, lower.tail = FALSE)
la_nd$prob_b <- 1 - predict(la_b, la_nd, type = "probability", at = 0.95)
la_nd$prob_xbx <- 1 - predict(la_xbx, la_nd, type = "probability", at = 0.95)
la_nd[, -(5:8)]

## visualization: only XBX works well
matplot(la_nd[, paste0("prob_", tolower(la_mod))], type = "l",
  col = la_col, lty = la_lty, lwd = 2, ylab = "P(Y > 0.95)", main = "P(Y > 0.95)", xaxt = "n")
axis(1, at = 1:2, labels = la_nd$arrangement)
legend("topleft", la_mod, col = la_col, lty = la_lty, lwd = 2, bty = "n")

Confidence of Mock Jurors in Their Verdicts

Description

Data with responses of naive mock jurors to the conventional conventional two-option verdict (guilt vs. acquittal) versus a three-option verdict setup (the third option was the Scottish 'not proven' alternative), in the presence/absence of conflicting testimonial evidence.

Usage

data("MockJurors", package = "betareg")data("MockJurors", package = "betareg")

Format

A data frame containing 104 observations on 3 variables.

verdict: factor indicating whether a two-option or three-option verdict is requested. (A sum contrast rather than treatment contrast is employed.)
conflict: factor. Is there conflicting testimonial evidence? (A sum contrast rather than treatment contrast is employed.)
confidence: jurors degree of confidence in his/her verdict, scaled to the open unit interval (see below).

Details

The data were collected by Daily (2004) among first-year psychology students at Australian National University. Smithson and Verkuilen (2006) employed the data scaling the original confidence (on a scale 0–100) to the open unit interval: ((original_confidence/100) * 103 - 0.5) / 104.

The original coding of conflict in the data provided from Smithson's homepage is -1/1 which Smithson and Verkuilen (2006) describe to mean no/yes. However, all their results (sample statistics, histograms, etc.) suggest that it actually means yes/no which was employed in MockJurors.

Source

Example 1 from Smithson and Verkuilen (2006) supplements.

References

Deady S (2004). The Psychological Third Verdict: 'Not Proven' or 'Not Willing to Make a Decision'? Unpublished honors thesis, The Australian National University, Canberra.

Smithson M, Verkuilen J (2006). A Better Lemon Squeezer? Maximum-Likelihood Regression with Beta-Distributed Dependent Variables. Psychological Methods, 11(7), 54–71.

Examples

data("MockJurors", package = "betareg")
library("lmtest")

## Smithson & Verkuilen (2006, Table 1)
## variable dispersion model
## (NOTE: numerical rather than analytical Hessian is used for replication,
##  Smithson & Verkuilen erroneously compute one-sided p-values)
mj_vd <- betareg(confidence ~ verdict * conflict | verdict * conflict,
  data = MockJurors, hessian = TRUE)
summary(mj_vd)

## model selection for beta regression: null model, fixed dispersion model (p. 61)
mj_null <- betareg(confidence ~ 1 | 1, data = MockJurors)
mj_fd <-   betareg(confidence ~ verdict * conflict | 1, data = MockJurors)
lrtest(mj_null, mj_fd)
lrtest(mj_null, mj_vd)
## McFadden's pseudo-R-squared
1 - as.vector(logLik(mj_null)/logLik(mj_vd))

## visualization
if(require("lattice")) {
  histogram(~ confidence | conflict + verdict, data = MockJurors,
    col = "lightgray", breaks = 0:10/10, type = "density")
}

## see demo("SmithsonVerkuilen2006", package = "betareg") for more details
data("MockJurors", package = "betareg")
library("lmtest")

## Smithson & Verkuilen (2006, Table 1)
## variable dispersion model
## (NOTE: numerical rather than analytical Hessian is used for replication,
##  Smithson & Verkuilen erroneously compute one-sided p-values)
mj_vd <- betareg(confidence ~ verdict * conflict | verdict * conflict,
  data = MockJurors, hessian = TRUE)
summary(mj_vd)

## model selection for beta regression: null model, fixed dispersion model (p. 61)
mj_null <- betareg(confidence ~ 1 | 1, data = MockJurors)
mj_fd <-   betareg(confidence ~ verdict * conflict | 1, data = MockJurors)
lrtest(mj_null, mj_fd)
lrtest(mj_null, mj_vd)
## McFadden's pseudo-R-squared
1 - as.vector(logLik(mj_null)/logLik(mj_vd))

## visualization
if(require("lattice")) {
  histogram(~ confidence | conflict + verdict, data = MockJurors,
    col = "lightgray", breaks = 0:10/10, type = "density")
}

## see demo("SmithsonVerkuilen2006", package = "betareg") for more details

Diagnostic Plots for betareg Objects

Description

Various types of standard diagnostic plots can be produced, involving various types of residuals, influence measures etc.

Usage

## S3 method for class 'betareg'
plot(x, which = 1:4,
  caption = c("Residuals vs indices of obs.", "Cook's distance plot",
    "Generalized leverage vs predicted values", "Residuals vs linear predictor", 
    "Half-normal plot of residuals", "Predicted vs observed values"),
    sub.caption = paste(deparse(x$call), collapse = "\n"), main = "", 
    ask = prod(par("mfcol")) < length(which) && dev.interactive(), 
    ..., type = "quantile", nsim = 100, level = 0.9)
## S3 method for class 'betareg'
plot(x, which = 1:4,
  caption = c("Residuals vs indices of obs.", "Cook's distance plot",
    "Generalized leverage vs predicted values", "Residuals vs linear predictor", 
    "Half-normal plot of residuals", "Predicted vs observed values"),
    sub.caption = paste(deparse(x$call), collapse = "\n"), main = "", 
    ask = prod(par("mfcol")) < length(which) && dev.interactive(), 
    ..., type = "quantile", nsim = 100, level = 0.9)

Arguments

`x`	fitted model object of class `"betareg"`.
`which`	numeric. If a subset of the plots is required, specify a subset of the numbers `1:6`.
`caption`	character. Captions to appear above the plots.
`sub.caption`	character. Common title-above figures if there are multiple.
`main`	character. Title to each plot in addition to the above `caption`.
`ask`	logical. If `TRUE`, the user is asked before each plot.
`...`	other parameters to be passed through to plotting functions.
`type`	character indicating type of residual to be used, see `residuals.betareg`.
`nsim`	numeric. Number of simulations in half-normal plots.
`level`	numeric. Confidence level in half-normal plots.

Details

The plot method for betareg objects produces various types of diagnostic plots. Most of these are standard for regression models and involve various types of residuals, influence measures etc. See Ferrari and Cribari-Neto (2004) for a discussion of some of these displays.

The which argument can be used to select a subset of currently six supported types of displays. The corresponding element of caption contains a brief description. In some more detail, the displays are: Residuals (as selected by type) vs indices of observations (which = 1). Cook's distances vs indices of observations (which = 2). Generalized leverage vs predicted values (which = 3). Residuals vs linear predictor (which = 4). Half-normal plot of residuals (which = 5), which is obtained using a simulation approach. Predicted vs observed values (which = 6).

References

Cribari-Neto F, Zeileis A (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Ferrari SLP, Cribari-Neto F (2004). Beta Regression for Modeling Rates and Proportions. Journal of Applied Statistics, 31(7), 799–815.

Examples

data("GasolineYield", package = "betareg")

gy <- betareg(yield ~ gravity + pressure + temp10 + temp, data = GasolineYield)

par(mfrow = c(3, 2))
plot(gy, which = 1:6)
par(mfrow = c(1, 1))
data("GasolineYield", package = "betareg")

gy <- betareg(yield ~ gravity + pressure + temp10 + temp, data = GasolineYield)

par(mfrow = c(3, 2))
plot(gy, which = 1:6)
par(mfrow = c(1, 1))

Prediction Method for betareg Objects

Description

Extract various types of predictions from beta regression models: First, GLM-style predictions on the scale of responses in (0, 1) or the scale of the linear predictor are provided. Second, various quantities based on the predicted beta distributions are available, e.g., moments, quantiles, probabilities, densities, etc.

Usage

## S3 method for class 'betareg'
predict(object, newdata = NULL,
  type = c("response", "link", "precision", "variance", "parameters",
    "distribution", "density", "probability", "quantile"),
  na.action = na.pass, at = 0.5, elementwise = NULL, ...)
## S3 method for class 'betareg'
predict(object, newdata = NULL,
  type = c("response", "link", "precision", "variance", "parameters",
    "distribution", "density", "probability", "quantile"),
  na.action = na.pass, at = 0.5, elementwise = NULL, ...)

Arguments

`object`	fitted model object of class `"betareg"`.
`newdata`	optionally, a data frame in which to look for variables with which to predict. If omitted, the original observations are used.
`type`	character indicating type of predictions: fitted means of the response (default, `"response"` or equivalently `"mean"`), corresponding linear predictor (`"link"`), fitted precision parameter phi (`"precision"`), fitted variances of the response (`"variance"`), all `"parameters"` of the response distribution, or the corresponding `"distribution"` object (using the infrastructure from distributions3). Finally, standard functions for the distribution can be evaluated (at argument `at`, see below), namely the `"density"` (or equivalently `"pdf"`), the `"quantile"` function, or the cumulative `"probability"` (or equivalently `"cdf"`).
`na.action`	function determining what should be done with missing values in `newdata`. The default is to predict `NA`.
`at`	numeric vector at which the predictions should be evaluated if `type` specifies a function that takes an additional argument.
`elementwise`	logical. Should each element of the distribution only be evaluated at the corresponding element of `at` (`elementwise = TRUE`) or at all elements in `at` (`elementwise = FALSE`). Elementwise evaluation is only possible if the number of observations is the same as the length of `at` and in that case a vector of the same length is returned. Otherwise a matrix is returned. The default is to use `elementwise = TRUE` if possible, and otherwise `elementwise = FALSE`.
`...`	further arguments when `type` specifies a function, e.g., `type = "density"` with `log = TRUE` computes log-densities (or log-likelihoods).

Details

Each prediction for a betareg model internally first computes the parameters for all observations in newdata (or the original data if newdata is missing). These parameters correspond to a predicted beta distribution (or extended-support beta distribution) for each observation. Then the actual predictions can also be moments of the distributions or standard quantities such as densities, cumulative probabilities, or quantiles. The latter are computed with the d/p/q functions such as dbetar (or dxbetax or dxbeta).

Value

Either a vector or matrix of predictions with the same number of observations as rows in newdata.

Examples

options(digits = 4)

data("GasolineYield", package = "betareg")

gy2 <- betareg(yield ~ batch + temp | temp, data = GasolineYield)

cbind(
  predict(gy2, type = "response"),
  predict(gy2, type = "link"),
  predict(gy2, type = "precision"),
  predict(gy2, type = "variance"),
  predict(gy2, type = "quantile", at = c(0.25, 0.5, 0.75))
)

## evaluate cumulative _p_robabilities for (small) new data set
gyd <- GasolineYield[c(1, 5, 10), ]

## CDF at 0.1 for each observation
predict(gy2, newdata = gyd, type = "probability", at = 0.1)

## CDF at each combination of 0.1/0.2 and observations
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2))

## CDF at elementwise combinations of 0.1/0.2/0.3 and observations
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2, 0.3))
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2, 0.3), elementwise = TRUE)

## CDF at all combinations of 0.1/0.2/0.3 and observations
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2, 0.3), elementwise = FALSE)
options(digits = 4)

data("GasolineYield", package = "betareg")

gy2 <- betareg(yield ~ batch + temp | temp, data = GasolineYield)

cbind(
  predict(gy2, type = "response"),
  predict(gy2, type = "link"),
  predict(gy2, type = "precision"),
  predict(gy2, type = "variance"),
  predict(gy2, type = "quantile", at = c(0.25, 0.5, 0.75))
)

## evaluate cumulative _p_robabilities for (small) new data set
gyd <- GasolineYield[c(1, 5, 10), ]

## CDF at 0.1 for each observation
predict(gy2, newdata = gyd, type = "probability", at = 0.1)

## CDF at each combination of 0.1/0.2 and observations
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2))

## CDF at elementwise combinations of 0.1/0.2/0.3 and observations
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2, 0.3))
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2, 0.3), elementwise = TRUE)

## CDF at all combinations of 0.1/0.2/0.3 and observations
predict(gy2, newdata = gyd, type = "probability", at = c(0.1, 0.2, 0.3), elementwise = FALSE)

Dyslexia and IQ Predicting Reading Accuracy

Description

Data for assessing the contribution of non-verbal IQ to children's reading skills in dyslexic and non-dyslexic children.

Usage

data("ReadingSkills", package = "betareg")data("ReadingSkills", package = "betareg")

Format

A data frame containing 44 observations on 3 variables.

accuracy: numeric. Reading score with maximum restricted to be 0.99 rather than 1 (see below).
dyslexia: factor. Is the child dyslexic? (A sum contrast rather than treatment contrast is employed.)
iq: numeric. Non-verbal intelligence quotient transformed to z-scores.
accuracy1: numeric. Unrestricted reading score with a maximum of 1 (see below).

Details

The data were collected by Pammer and Kevan (2004) and employed by Smithson and Verkuilen (2006). The original reading accuracy score was transformed by Smithson and Verkuilen (2006) so that accuracy is in the open unit interval (0, 1) and beta regression can be employed. First, the original accuracy was scaled using the minimal and maximal score (a and b, respectively) that can be obtained in the test: accuracy1 = (original_accuracy - a) / (b - a) (a and b are not provided). Subsequently, accuracy was obtained from accuracy1 by replacing all observations with a value of 1 with 0.99.

Kosmidis and Zeileis (2024) propose to investigate the original unrestricted accuracy1 variable using their extended-support beta mixture regression.

Source

Example 3 from Smithson and Verkuilen (2006) supplements.

References

Cribari-Neto F, Zeileis A (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Grün B, Kosmidis I, Zeileis A (2012). Extended Beta Regression in R: Shaken, Stirred, Mixed, and Partitioned. Journal of Statistical Software, 48(11), 1–25. doi:10.18637/jss.v048.i11

Kosmidis I, Zeileis A (2024). Extended-Support Beta Regression for [0, 1] Responses. 2409.07233, arXiv.org E-Print Archive. doi:10.48550/arXiv.2409.07233

Pammer K, Kevan A (2004). The Contribution of Visual Sensitivity, Phonological Processing and Non-Verbal IQ to Children's Reading. Unpublished manuscript, The Australian National University, Canberra.

Smithson M, Verkuilen J (2006). A Better Lemon Squeezer? Maximum-Likelihood Regression with Beta-Distributed Dependent Variables. Psychological Methods, 11(7), 54–71.

Examples

options(digits = 4)
data("ReadingSkills", package = "betareg")

## Smithson & Verkuilen (2006, Table 5)
## OLS regression
## (Note: typo in iq coefficient: 0.3954 instead of 0.3594)
rs_ols <- lm(qlogis(accuracy) ~ dyslexia * iq, data = ReadingSkills)
summary(rs_ols)
## Beta regression (with numerical rather than analytic standard errors)
## (Note: Smithson & Verkuilen erroneously compute one-sided p-values)
rs_beta <- betareg(accuracy ~ dyslexia * iq | dyslexia + iq,
  data = ReadingSkills, hessian = TRUE)
summary(rs_beta)

## Extended-support beta mixture regression (Kosmidis & Zeileis 2024)
rs_xbx <- betareg(accuracy1 ~ dyslexia * iq | dyslexia + iq, data = ReadingSkills)
summary(rs_xbx)

## Coefficients in XBX are typically somewhat shrunken compared to beta
cbind(XBX = coef(rs_xbx), Beta = c(coef(rs_beta), NA))

## Visualization
plot(accuracy1 ~ iq, data = ReadingSkills, col = c(4, 2)[dyslexia], pch = 19)
nd <- data.frame(dyslexia = "no", iq = -30:30/10)
lines(nd$iq, predict(rs_xbx, nd), col = 4)
lines(nd$iq, predict(rs_beta, nd), col = 4, lty = 5)
lines(nd$iq, plogis(predict(rs_ols, nd)), col = 4, lty = 3)
nd <- data.frame(dyslexia = "yes", iq = -30:30/10)
lines(nd$iq, predict(rs_xbx, nd), col = 2)
lines(nd$iq, predict(rs_beta, nd), col = 2, lty = 5)
lines(nd$iq, plogis(predict(rs_ols, nd)), col = 2, lty = 3)
legend("topleft", c("Dyslexia: no", "Dyslexia: yes", "OLS", "XBX", "Beta"),
  lty = c(0, 0, 3, 1, 5), pch = c(19, 19, NA, NA, NA), col = c(4, 2, 1, 1, 1), bty = "n")

## see demo("SmithsonVerkuilen2006", package = "betareg") for further details
options(digits = 4)
data("ReadingSkills", package = "betareg")

## Smithson & Verkuilen (2006, Table 5)
## OLS regression
## (Note: typo in iq coefficient: 0.3954 instead of 0.3594)
rs_ols <- lm(qlogis(accuracy) ~ dyslexia * iq, data = ReadingSkills)
summary(rs_ols)
## Beta regression (with numerical rather than analytic standard errors)
## (Note: Smithson & Verkuilen erroneously compute one-sided p-values)
rs_beta <- betareg(accuracy ~ dyslexia * iq | dyslexia + iq,
  data = ReadingSkills, hessian = TRUE)
summary(rs_beta)

## Extended-support beta mixture regression (Kosmidis & Zeileis 2024)
rs_xbx <- betareg(accuracy1 ~ dyslexia * iq | dyslexia + iq, data = ReadingSkills)
summary(rs_xbx)

## Coefficients in XBX are typically somewhat shrunken compared to beta
cbind(XBX = coef(rs_xbx), Beta = c(coef(rs_beta), NA))

## Visualization
plot(accuracy1 ~ iq, data = ReadingSkills, col = c(4, 2)[dyslexia], pch = 19)
nd <- data.frame(dyslexia = "no", iq = -30:30/10)
lines(nd$iq, predict(rs_xbx, nd), col = 4)
lines(nd$iq, predict(rs_beta, nd), col = 4, lty = 5)
lines(nd$iq, plogis(predict(rs_ols, nd)), col = 4, lty = 3)
nd <- data.frame(dyslexia = "yes", iq = -30:30/10)
lines(nd$iq, predict(rs_xbx, nd), col = 2)
lines(nd$iq, predict(rs_beta, nd), col = 2, lty = 5)
lines(nd$iq, plogis(predict(rs_ols, nd)), col = 2, lty = 3)
legend("topleft", c("Dyslexia: no", "Dyslexia: yes", "OLS", "XBX", "Beta"),
  lty = c(0, 0, 3, 1, 5), pch = c(19, 19, NA, NA, NA), col = c(4, 2, 1, 1, 1), bty = "n")

## see demo("SmithsonVerkuilen2006", package = "betareg") for further details

Residuals Method for betareg Objects

Description

Extract various types of residuals from beta regression models: raw response residuals (observed - fitted), Pearson residuals (raw residuals scaled by square root of variance function), deviance residuals (scaled log-likelihood contributions), and different kinds of weighted residuals suggested by Espinheira et al. (2008).

Usage

## S3 method for class 'betareg'
residuals(object, type = c("quantile",
  "deviance", "pearson", "response", "weighted", "sweighted", "sweighted2"),
  ...)
## S3 method for class 'betareg'
residuals(object, type = c("quantile",
  "deviance", "pearson", "response", "weighted", "sweighted", "sweighted2"),
  ...)

Arguments

`object`	fitted model object of class `"betareg"`.
`type`	character indicating type of residuals.
`...`	currently not used.

Details

The default residuals (starting from version 3.2-0) are quantile residuals as proposed by Dunn and Smyth (1996) and explored in the context of beta regression by Pereira (2017). In case of extended-support beta regression with boundary observations at 0 and/or 1, the quantile residuals for the boundary observations are randomized.

The definitions of all other residuals are provided in Espinheira et al. (2008): Equation 2 for "pearson", last equation on page 409 for "deviance", Equation 6 for "weighted", Equation 7 for "sweighted", and Equation 8 for "sweighted2".

Espinheira et al. (2008) recommend to use "sweighted2", hence this was the default prior to version 3.2-0. However, these are rather burdensome to compute because they require operations of $O(n^2)$ and hence are typically prohibitively costly in large sample. Also they are not available for extended-support beta regression. Finally, Pereira (2017) found quantile residuals to have better distributional properties.

References

Cribari-Neto F, Zeileis A (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Dunn PK, Smyth GK (1996). Randomized Quantile Residuals. Journal of Computational and Graphical Statistics, 5(3), 236–244. doi:10.2307/1390802

Espinheira PL, Ferrari SLP, Cribari-Neto F (2008). On Beta Regression Residuals. Journal of Applied Statistics, 35(4), 407–419. doi:10.1080/02664760701834931

Ferrari SLP, Cribari-Neto F (2004). Beta Regression for Modeling Rates and Proportions. Journal of Applied Statistics, 31(7), 799–815. doi:10.1080/0266476042000214501

Pereira GHA (2017). On Quantile Residuals in Beta Regression. Communications in Statistics – Simulation and Computation, 48(1), 302–316. doi:10.1080/03610918.2017.1381740

Kosmidis I, Zeileis A (2024). Extended-Support Beta Regression for [0, 1] Responses. 2409.07233, arXiv.org E-Print Archive. doi:10.48550/arXiv.2409.07233

Examples

options(digits = 4)

data("GasolineYield", package = "betareg")

gy <- betareg(yield ~ gravity + pressure + temp10 + temp, data = GasolineYield)

gy_res <- cbind(
  "quantile"   = residuals(gy, type = "quantile"),
  "pearson"    = residuals(gy, type = "pearson"),
  "deviance"   = residuals(gy, type = "deviance"),
  "response"   = residuals(gy, type = "response"),
  "weighted"   = residuals(gy, type = "weighted"),
  "sweighted"  = residuals(gy, type = "sweighted"),
  "sweighted2" = residuals(gy, type = "sweighted2")
)
pairs(gy_res)

cor(gy_res)
options(digits = 4)

data("GasolineYield", package = "betareg")

gy <- betareg(yield ~ gravity + pressure + temp10 + temp, data = GasolineYield)

gy_res <- cbind(
  "quantile"   = residuals(gy, type = "quantile"),
  "pearson"    = residuals(gy, type = "pearson"),
  "deviance"   = residuals(gy, type = "deviance"),
  "response"   = residuals(gy, type = "response"),
  "weighted"   = residuals(gy, type = "weighted"),
  "sweighted"  = residuals(gy, type = "sweighted"),
  "sweighted2" = residuals(gy, type = "sweighted2")
)
pairs(gy_res)

cor(gy_res)

Dependency of Anxiety on Stress

Description

Stress and anxiety among nonclinical women in Townsville, Queensland, Australia.

Usage

data("StressAnxiety", package = "betareg")data("StressAnxiety", package = "betareg")

Format

A data frame containing 166 observations on 2 variables.

stress: score, linearly transformed to the open unit interval (see below).
anxiety: score, linearly transformed to the open unit interval (see below).

Details

Both variables were assess on the Depression Anxiety Stress Scales, ranging from 0 to 42. Smithson and Verkuilen (2006) transformed these to the open unit interval (without providing details about this transformation).

Source

Example 2 from Smithson and Verkuilen (2006) supplements.

References

Smithson M, Verkuilen J (2006). A Better Lemon Squeezer? Maximum-Likelihood Regression with Beta-Distributed Dependent Variables. Psychological Methods, 11(7), 54–71.

Examples

data("StressAnxiety", package = "betareg")
StressAnxiety <- StressAnxiety[order(StressAnxiety$stress),]

## Smithson & Verkuilen (2006, Table 4)
sa_null <- betareg(anxiety ~ 1 | 1,
  data = StressAnxiety, hessian = TRUE)
sa_stress <- betareg(anxiety ~ stress | stress,
  data = StressAnxiety, hessian = TRUE)
summary(sa_null)
summary(sa_stress)
AIC(sa_null, sa_stress)
1 - as.vector(logLik(sa_null)/logLik(sa_stress))

## visualization
attach(StressAnxiety)
plot(jitter(anxiety) ~ jitter(stress),
  xlab = "Stress", ylab = "Anxiety",
  xlim = c(0, 1), ylim = c(0, 1))
lines(lowess(anxiety ~ stress))
lines(fitted(sa_stress) ~ stress, lty = 2)
lines(fitted(lm(anxiety ~ stress)) ~ stress, lty = 3)
legend("topleft", c("lowess", "betareg", "lm"), lty = 1:3, bty = "n")
detach(StressAnxiety)

## see demo("SmithsonVerkuilen2006", package = "betareg") for more details
data("StressAnxiety", package = "betareg")
StressAnxiety <- StressAnxiety[order(StressAnxiety$stress),]

## Smithson & Verkuilen (2006, Table 4)
sa_null <- betareg(anxiety ~ 1 | 1,
  data = StressAnxiety, hessian = TRUE)
sa_stress <- betareg(anxiety ~ stress | stress,
  data = StressAnxiety, hessian = TRUE)
summary(sa_null)
summary(sa_stress)
AIC(sa_null, sa_stress)
1 - as.vector(logLik(sa_null)/logLik(sa_stress))

## visualization
attach(StressAnxiety)
plot(jitter(anxiety) ~ jitter(stress),
  xlab = "Stress", ylab = "Anxiety",
  xlim = c(0, 1), ylim = c(0, 1))
lines(lowess(anxiety ~ stress))
lines(fitted(sa_stress) ~ stress, lty = 2)
lines(fitted(lm(anxiety ~ stress)) ~ stress, lty = 3)
legend("topleft", c("lowess", "betareg", "lm"), lty = 1:3, bty = "n")
detach(StressAnxiety)

## see demo("SmithsonVerkuilen2006", package = "betareg") for more details

Methods for betareg Objects

Description

Methods for extracting information from fitted beta regression model objects of class "betareg".

Usage

## S3 method for class 'betareg'
summary(object, phi = NULL, type = "quantile", ...)

## S3 method for class 'betareg'
coef(object, model = c("full", "mean", "precision"), phi = NULL, ...)
## S3 method for class 'betareg'
vcov(object, model = c("full", "mean", "precision"), phi = NULL, ...)
## S3 method for class 'betareg'
bread(x, phi = NULL, ...)
## S3 method for class 'betareg'
estfun(x, phi = NULL, ...)
## S3 method for class 'betareg'
summary(object, phi = NULL, type = "quantile", ...)

## S3 method for class 'betareg'
coef(object, model = c("full", "mean", "precision"), phi = NULL, ...)
## S3 method for class 'betareg'
vcov(object, model = c("full", "mean", "precision"), phi = NULL, ...)
## S3 method for class 'betareg'
bread(x, phi = NULL, ...)
## S3 method for class 'betareg'
estfun(x, phi = NULL, ...)

Arguments

`object`, `x`	fitted model object of class `"betareg"`.
`phi`	logical indicating whether the parameters in the precision model (for phi) should be reported as full model parameters (`TRUE`) or nuisance parameters (`FALSE`). The default is taken from `object$phi`.
`type`	character specifying type of residuals to be included in the summary output, see `residuals.betareg`.
`model`	character specifying for which component of the model coefficients/covariance should be extracted. (Only used if `phi` is `NULL`.)
`...`	currently not used.

Details

A set of standard extractor functions for fitted model objects is available for objects of class "betareg", including methods to the generic functions print and summary which print the estimated coefficients along with some further information. The summary in particular supplies partial Wald tests based on the coefficients and the covariance matrix. As usual, the summary method returns an object of class "summary.betareg" containing the relevant summary statistics which can subsequently be printed using the associated print method.

A logLik method is provided, hence AIC can be called to compute information criteria.

References

Cribari-Neto F, Zeileis A (2010). Beta Regression in R. Journal of Statistical Software, 34(2), 1–24. doi:10.18637/jss.v034.i02

Ferrari SLP, Cribari-Neto F (2004). Beta Regression for Modeling Rates and Proportions. Journal of Applied Statistics, 31(7), 799–815.

Simas AB, Barreto-Souza W, Rocha AV (2010). Improved Estimators for a General Class of Beta Regression Models. Computational Statistics & Data Analysis, 54(2), 348–366.

Examples

options(digits = 4)

data("GasolineYield", package = "betareg")

gy2 <- betareg(yield ~ batch + temp | temp, data = GasolineYield)

summary(gy2)
coef(gy2)
vcov(gy2)
logLik(gy2)
AIC(gy2)

coef(gy2, model = "mean")
coef(gy2, model = "precision")
summary(gy2, phi = FALSE)
options(digits = 4)

data("GasolineYield", package = "betareg")

gy2 <- betareg(yield ~ batch + temp | temp, data = GasolineYield)

summary(gy2)
coef(gy2)
vcov(gy2)
logLik(gy2)
AIC(gy2)

coef(gy2, model = "mean")
coef(gy2, model = "precision")
summary(gy2, phi = FALSE)

Weather Task with Priming and Precise and Imprecise Probabilities

Description

In this study participants were asked to judge how likely Sunday is to be the hottest day of the week.

Usage

data("WeatherTask", package = "betareg")data("WeatherTask", package = "betareg")

Format

A data frame with 345 observations on the following 3 variables.

priming: a factor with levels two-fold (case prime) and seven-fold (class prime).
eliciting: a factor with levels precise and imprecise (lower and upper limit).
agreement: a numeric vector, probability indicated by participants or the average between minimum and maximum probability indicated.

Details

For priming the questions were:

two-fold: [What is the probability that] the temperature at Canberra airport on Sunday will be higher than every other day next week?
seven-fold: [What is the probability that] the highest temperature of the week at Canberra airport will occur on Sunday?

For eliciting the instructions were if

precise: to assign a probability estimate,
imprecise: to assign a lower and upper probability estimate.

Source

Taken from Smithson et al. (2011) supplements.

References

Smithson M, Segale C (2009). Partition Priming in Judgments of Imprecise Probabilities. Journal of Statistical Theory and Practice, 3(1), 169–181.

Examples

data("WeatherTask", package = "betareg")
library("flexmix")
wt_betamix <- betamix(agreement ~ 1, data = WeatherTask, k = 2,
  extra_components = extraComponent(type = "betareg", coef =
    list(mean = 0, precision = 2)),
  FLXconcomitant = FLXPmultinom(~ priming + eliciting))
data("WeatherTask", package = "betareg")
library("flexmix")
wt_betamix <- betamix(agreement ~ 1, data = WeatherTask, k = 2,
  extra_components = extraComponent(type = "betareg", coef =
    list(mean = 0, precision = 2)),
  FLXconcomitant = FLXPmultinom(~ priming + eliciting))

The Extended-Support Beta Distribution

Description

Density, distribution function, quantile function, and random generation for the extended-support beta distribution (in regression parameterization) on [0, 1].

Usage

dxbeta(x, mu, phi, nu = 0, log = FALSE)

pxbeta(q, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE)

qxbeta(p, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE)

rxbeta(n, mu, phi, nu = 0)
dxbeta(x, mu, phi, nu = 0, log = FALSE)

pxbeta(q, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE)

qxbeta(p, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE)

rxbeta(n, mu, phi, nu = 0)

Arguments

`x`, `q`	numeric. Vector of quantiles.
`p`	numeric. Vector of probabilities.
`n`	numeric. Number of observations. If `length(n) > 1`, the length is taken to be the number required.
`mu`	numeric. The mean of the underlying beta distribution on [-nu, 1 + nu].
`phi`	numeric. The precision parameter of the underlying beta distribution on [-nu, 1 + nu].
`nu`	numeric. Exceedence parameter for the support of the underlying beta distribution on [-nu, 1 + nu] that is censored to [0, 1].
`log`, `log.p`	logical. If TRUE, probabilities p are given as log(p).
`lower.tail`	logical. If TRUE (default), probabilities are P[X <= x] otherwise, P[X > x].

Details

In order to obtain an extended-support beta distribution on [0, 1] an additional exceedence parameter nu is introduced. If nu > 0, this scales the underlying beta distribution to the interval [-nu, 1 + nu] where the tails are subsequently censored to the unit interval [0, 1] with point masses on the boundaries 0 and 1. Thus, nu controls how likely boundary observations are and for nu = 0 (the default), the distribution reduces to the classic beta distribution (in regression parameterization) without boundary observations.

Value

dxbeta gives the density, pxbeta gives the distribution function, qxbeta gives the quantile function, and rxbeta generates random deviates.

Create an Extended-Support Beta Distribution

Description

Class and methods for extended-support beta distributions using the workflow from the distributions3 package.

Usage

XBeta(mu, phi, nu = 0)
XBeta(mu, phi, nu = 0)

Arguments

`mu`	numeric. The mean of the underlying beta distribution on [-nu, 1 + nu].
`phi`	numeric. The precision parameter of the underlying beta distribution on [-nu, 1 + nu].
`nu`	numeric. Exceedence parameter for the support of the underlying beta distribution on [-nu, 1 + nu] that is censored to [0, 1].

Details

Value

A XBeta distribution object.

Examples


## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- XBeta(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  nu = c(0, 0.1, 0.2)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## it is only continuous when there are no point masses on the boundary
is_continuous(X)
cdf(X, 0)
cdf(X, 1, lower.tail = FALSE)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses (except at censoring points)
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- XBeta(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  nu = c(0, 0.1, 0.2)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## it is only continuous when there are no point masses on the boundary
is_continuous(X)
cdf(X, 0)
cdf(X, 1, lower.tail = FALSE)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses (except at censoring points)
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

The Extended-Support Beta Mixture Distribution

Description

Density, distribution function, quantile function, and random generation for the extended-support beta mixture distribution (in regression parameterization) on [0, 1].

Usage

dxbetax(x, mu, phi, nu = 0, log = FALSE, quad = 20)

pxbetax(q, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE, quad = 20)

qxbetax(p, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE, quad = 20,
  tol = .Machine$double.eps^0.7)

rxbetax(n, mu, phi, nu = 0)
dxbetax(x, mu, phi, nu = 0, log = FALSE, quad = 20)

pxbetax(q, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE, quad = 20)

qxbetax(p, mu, phi, nu = 0, lower.tail = TRUE, log.p = FALSE, quad = 20,
  tol = .Machine$double.eps^0.7)

rxbetax(n, mu, phi, nu = 0)

Arguments

`x`, `q`	numeric. Vector of quantiles.
`p`	numeric. Vector of probabilities.
`n`	numeric. Number of observations. If `length(n) > 1`, the length is taken to be the number required.
`mu`	numeric. The mean of the underlying beta distribution on [-nu, 1 + nu].
`phi`	numeric. The precision parameter of the underlying beta distribution on [-nu, 1 + nu].
`nu`	numeric. Mean of the exponentially-distributed exceedence parameter for the underlying beta distribution on [-nu, 1 + nu] that is censored to [0, 1].
`log`, `log.p`	logical. If TRUE, probabilities p are given as log(p).
`lower.tail`	logical. If TRUE (default), probabilities are P[X <= x] otherwise, P[X > x].
`quad`	numeric. The number of quadrature points for numeric integration of the continuous mixture. Alternatively, a matrix with nodes and weights for the quadrature points can be specified.
`tol`	numeric. Accuracy (convergence tolerance) for numerically determining quantiles based on `uniroot` and `pxbetax`.

Details

The extended-support beta mixture distribution is a continuous mixture of extended-support beta distributions on [0, 1] where the underlying exceedence parameter is exponentially distributed with mean nu. Thus, if nu > 0, the resulting distribution has point masses on the boundaries 0 and 1 with larger values of nu leading to higher boundary probabilities. For nu = 0 (the default), the distribution reduces to the classic beta distribution (in regression parameterization) without boundary observations.

Value

dxbetax gives the density, pxbetax gives the distribution function, qxbetax gives the quantile function, and rxbetax generates random deviates.

Create an Extended-Support Beta Mixture Distribution

Description

Class and methods for extended-support beta distributions using the workflow from the distributions3 package.

Usage

XBetaX(mu, phi, nu = 0)
XBetaX(mu, phi, nu = 0)

Arguments

`mu`	numeric. The mean of the underlying beta distribution on [-nu, 1 + nu].
`phi`	numeric. The precision parameter of the underlying beta distribution on [-nu, 1 + nu].
`nu`	numeric. Mean of the exponentially-distributed exceedence parameter for the underlying beta distribution on [-nu, 1 + nu] that is censored to [0, 1].

Details

Value

A XBetaX distribution object.

Examples


## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- XBetaX(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  nu = c(0, 0.1, 0.2)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## it is only continuous when there are no point masses on the boundary
is_continuous(X)
cdf(X, 0)
cdf(X, 1, lower.tail = FALSE)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses (except at censoring points)
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

## package and random seed
library("distributions3")
set.seed(6020)

## three beta distributions
X <- XBetaX(
  mu  = c(0.25, 0.50, 0.75),
  phi = c(1, 1, 2),
  nu = c(0, 0.1, 0.2)
)

X

## compute moments of the distribution
mean(X)
variance(X)

## support interval (minimum and maximum)
support(X)

## it is only continuous when there are no point masses on the boundary
is_continuous(X)
cdf(X, 0)
cdf(X, 1, lower.tail = FALSE)

## simulate random variables
random(X, 5)

## histograms of 1,000 simulated observations
x <- random(X, 1000)
hist(x[1, ])
hist(x[2, ])
hist(x[3, ])

## probability density function (PDF) and log-density (or log-likelihood)
x <- c(0.25, 0.5, 0.75)
pdf(X, x)
pdf(X, x, log = TRUE)
log_pdf(X, x)

## cumulative distribution function (CDF)
cdf(X, x)

## quantiles
quantile(X, 0.5)

## cdf() and quantile() are inverses (except at censoring points)
cdf(X, quantile(X, 0.5))
quantile(X, cdf(X, 1))

## all methods above can either be applied elementwise or for
## all combinations of X and x, if length(X) = length(x),
## also the result can be assured to be a matrix via drop = FALSE
p <- c(0.05, 0.5, 0.95)
quantile(X, p, elementwise = FALSE)
quantile(X, p, elementwise = TRUE)
quantile(X, p, elementwise = TRUE, drop = FALSE)

## compare theoretical and empirical mean from 1,000 simulated observations
cbind(
  "theoretical" = mean(X),
  "empirical" = rowMeans(random(X, 1000))
)

Package 'betareg'

Help Index

The Zero- and/or One-Inflated Beta Distribution in Regression Parameterization

Description

Usage

Arguments

Details

Value

See Also

Create a Zero- and/or One-Inflated Beta Distribution

Description

Usage

Arguments

Details

Value

See Also

Examples

The 4-Parameter Beta Distribution in Regression Parameterization

Description

Usage

Arguments

Details

Value

See Also

Create a 4-Parameter Beta Distribution

Description

Usage

Arguments

Details

Value

See Also

Examples

Finite Mixtures of Beta Regression for Rates and Proportions

Description

Usage

Arguments

Details

Value

Author(s)

References

See Also

Examples

The Beta Distribution in Regression Parameterization

Description

Usage

Arguments

Details

Value

See Also

Create a Beta Regression Distribution

Description

Usage

Arguments

Details

Value

See Also

Examples

Beta Regression for Rates and Proportions

Description

Usage

Arguments

Details

Value

References

See Also

Examples

Control Parameters for Beta Regression

Description

Usage

Arguments

Details

Value

See Also

Examples

Beta Regression Trees

Description

Usage

Arguments

Details

Value