Defining Tables for GaussSuppression

Introduction and setup

The GaussSuppression package uses a common interface shared by other SDC packages developed at Statistics Norway (see also SmallCountRounding and SSBcellKey). In the background, these packages use a model matrix representation, which connects the input data to the intended output. This functionality is provided by the R package SSBtools. In this vignette, we look at multiple ways of specifying output tables given different forms of input. Note that this vignette only scratches the surface of what is possible with the provided interface, and rather is intended to help users get going with the package.

We begin by importing the necessary dependencies as well as loading a test data set provided in the SSBtools package.

library(SSBtools)
library(GaussSuppression)

dataset <- SSBtools::SSBtoolsData("d2s")

microdata <- SSBtools::MakeMicro(dataset, "freq")

head(dataset)
#>   region   county  size main_income freq
#> 1      A county-1   BIG       other    2
#> 2      B county-2   BIG       other    3
#> 3      C county-2   BIG       other    5
#> 4      D county-1 small       other    3
#> 5      E county-3 small       other    9
#> 6      F county-3 small       other    4
nrow(dataset)
#> [1] 24
head(microdata)
#>   region   county size main_income freq
#> 1      A county-1  BIG       other    1
#> 2      A county-1  BIG       other    1
#> 3      B county-2  BIG       other    1
#> 4      B county-2  BIG       other    1
#> 5      B county-2  BIG       other    1
#> 6      C county-2  BIG       other    1
nrow(microdata)
#> [1] 338

The imported data set is a fictitious data set containing the variables: region, county, size, main_income, freq, where region, county, and size are different (non-nested) regional hierarchies. GaussSuppression can take microdata as input as well, which we will demonstrate in the following sections.

The table below illustrates this dataset reshaped to wide format with several freq columns created from the main_income variable. However, please note that data that is input and output in the GaussSuppression package is always in long format.

**Table 1**: `dataset` reshaped to wide format.
regional variables			main_income
region	county	size	other	wages	assistance	pensions
A	county-1	BIG	2	11	55	36
B	county-2	BIG	3	1	29	18
C	county-2	BIG	5	8	35	25
D	county-1	small	3	0	9	2
E	county-3	small	9	0	32	20
F	county-3	small	4	2	18	11

Defining Table Dimensions

Output tables are mainly specified using the following three parameters: dimVar, hierarchies, and formula.

Creating tables using `dimVar`

The most basic way of defining output tables is by using the dimVar parameter. This generates by default all combinations of the variables provided, including marginals. For example, the following function call creates a one dimensional frequency table over the variable region.

GaussSuppressionFromData(data = dataset,
                         dimVar = "region",
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>   region freq primary suppressed
#> 1  Total  338   FALSE      FALSE
#> 2      A  104   FALSE      FALSE
#> 3      B   51   FALSE      FALSE
#> 4      C   73   FALSE      FALSE
#> 5      D   14   FALSE      FALSE
#> 6      E   61   FALSE      FALSE
#> 7      F   35   FALSE      FALSE

The same output is shown below as a formatted table.

Table 2: dimVar = "region"

region
A	104
B	51
C	73
D	14
E	61
F	35
Total	338

Note the use of the function GaussSuppressionFromData and the inclusion of two parameters primary and protectZeros. The functions in GaussSuppression are designed to incorporate both table building and protection into a single function call. Thus, to illustrate the table building features, we have set that nothing must be protected. To learn more about the different ways of protecting tables, see the other vignettes of this package.

In a similar fashion, we can include multiple variables in the dimVar parameter:

GaussSuppressionFromData(data = dataset,
                         dimVar = c("region", "main_income"),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>    region main_income freq primary suppressed
#> 1   Total       Total  338   FALSE      FALSE
#> 2   Total  assistance  178   FALSE      FALSE
#> 3   Total       other   26   FALSE      FALSE
#> 4   Total    pensions  112   FALSE      FALSE
#> 5   Total       wages   22   FALSE      FALSE
#> 6       A       Total  104   FALSE      FALSE
#> 7       A  assistance   55   FALSE      FALSE
#> 8       A       other    2   FALSE      FALSE
#> 9       A    pensions   36   FALSE      FALSE
#> 10      A       wages   11   FALSE      FALSE
#> 11      B       Total   51   FALSE      FALSE
#> 12      B  assistance   29   FALSE      FALSE
#> 13      B       other    3   FALSE      FALSE
#> 14      B    pensions   18   FALSE      FALSE
#> 15      B       wages    1   FALSE      FALSE
#> 16      C       Total   73   FALSE      FALSE
#> 17      C  assistance   35   FALSE      FALSE
#> 18      C       other    5   FALSE      FALSE
#> 19      C    pensions   25   FALSE      FALSE
#> 20      C       wages    8   FALSE      FALSE
#> 21      D       Total   14   FALSE      FALSE
#> 22      D  assistance    9   FALSE      FALSE
#> 23      D       other    3   FALSE      FALSE
#> 24      D    pensions    2   FALSE      FALSE
#> 25      D       wages    0   FALSE      FALSE
#> 26      E       Total   61   FALSE      FALSE
#> 27      E  assistance   32   FALSE      FALSE
#> 28      E       other    9   FALSE      FALSE
#> 29      E    pensions   20   FALSE      FALSE
#> 30      E       wages    0   FALSE      FALSE
#> 31      F       Total   35   FALSE      FALSE
#> 32      F  assistance   18   FALSE      FALSE
#> 33      F       other    4   FALSE      FALSE
#> 34      F    pensions   11   FALSE      FALSE
#> 35      F       wages    2   FALSE      FALSE

The same output is shown below as a formatted and reshaped table. Cells that also occur as input/inner cells have white background.

**Table 3**: `dimVar = c("region", "main_income")`
region	other	wages	assistance	pensions	Total
A	2	11	55	36	104
B	3	1	29	18	51
C	5	8	35	25	73
D	3	0	9	2	14
E	9	0	32	20	61
F	4	2	18	11	35
Total	26	22	178	112	338

Note in particular what happens when we provide two regional variables:

GaussSuppressionFromData(data = dataset,
                         dimVar = c("region", "county"),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      region freq primary suppressed
#> 1     Total  338   FALSE      FALSE
#> 2  county-1  118   FALSE      FALSE
#> 3  county-2  124   FALSE      FALSE
#> 4  county-3   96   FALSE      FALSE
#> 5         A  104   FALSE      FALSE
#> 6         B   51   FALSE      FALSE
#> 7         C   73   FALSE      FALSE
#> 8         D   14   FALSE      FALSE
#> 9         E   61   FALSE      FALSE
#> 10        F   35   FALSE      FALSE

Table 4: dimVar = c("region", "county")

region
A	104
B	51
C	73
D	14
E	61
F	35
county-1	118
county-2	124
county-3	96
Total	338

The function detects hierarchies encoded in dimVar columns, and collapses them into a single column (with the name of the most detailed variable). In this way, it is not necessary to specify hierarchies by hand and include them explicitly in the function call. This also works for non-nested hierarchies:

GaussSuppressionFromData(data = dataset,
                         dimVar = c("region", "county", "size"),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      region freq primary suppressed
#> 1       BIG  228   FALSE      FALSE
#> 2     Total  338   FALSE      FALSE
#> 3  county-1  118   FALSE      FALSE
#> 4  county-2  124   FALSE      FALSE
#> 5  county-3   96   FALSE      FALSE
#> 6     small  110   FALSE      FALSE
#> 7         A  104   FALSE      FALSE
#> 8         B   51   FALSE      FALSE
#> 9         C   73   FALSE      FALSE
#> 10        D   14   FALSE      FALSE
#> 11        E   61   FALSE      FALSE
#> 12        F   35   FALSE      FALSE

Table 5: dimVar = c("region", "county", "size")

region
A	104
B	51
C	73
D	14
E	61
F	35
county-1	118
county-2	124
county-3	96
small	110
BIG	228
Total	338

We can combine all the dimensional variables in our example data:

output <- GaussSuppressionFromData(data = dataset,
                                   dimVar = c("region", "county", "size", "main_income"),
                                   freqVar = "freq",
                                   primary = FALSE,
                                   protectZeros = FALSE)
head(output)
#>   region main_income freq primary suppressed
#> 1    BIG       Total  228   FALSE      FALSE
#> 2    BIG  assistance  119   FALSE      FALSE
#> 3    BIG       other   10   FALSE      FALSE
#> 4    BIG    pensions   79   FALSE      FALSE
#> 5    BIG       wages   20   FALSE      FALSE
#> 6  Total       Total  338   FALSE      FALSE

Table 6: dimVar = c("region", "county", "size", "main_income")

region	other	wages	assistance	pensions	Total
A	2	11	55	36	104
B	3	1	29	18	51
C	5	8	35	25	73
D	3	0	9	2	14
E	9	0	32	20	61
F	4	2	18	11	35
county-1	5	11	64	38	118
county-2	8	9	64	43	124
county-3	13	2	50	31	96
small	16	2	59	33	110
BIG	10	20	119	79	228
Total	26	22	178	112	338

In the background, functions from SSBtools are used to find the hierarchies. There are multiple ways of inspecting which hierarchies can be found; users familiar with DimLists used in other SDC packages can for example use the following:

FindDimLists(dataset[c("region", "county")])
#> $region
#>    levels    codes
#> 1       @    Total
#> 2      @@ county-1
#> 3     @@@        A
#> 4     @@@        D
#> 5      @@ county-2
#> 6     @@@        B
#> 7     @@@        C
#> 8      @@ county-3
#> 9     @@@        E
#> 10    @@@        F
FindDimLists(dataset[c("region", "county", "size")])
#> $region
#>    levels    codes
#> 1       @    Total
#> 2      @@ county-1
#> 3     @@@        A
#> 4     @@@        D
#> 5      @@ county-2
#> 6     @@@        B
#> 7     @@@        C
#> 8      @@ county-3
#> 9     @@@        E
#> 10    @@@        F
#> 
#> $region
#>   levels codes
#> 1      @ Total
#> 2     @@   BIG
#> 3    @@@     A
#> 4    @@@     B
#> 5    @@@     C
#> 6     @@ small
#> 7    @@@     D
#> 8    @@@     E
#> 9    @@@     F

Note the last example which contained non-nested hierarchies. Here, a unique DimList is created for each tree-shaped hierarchy in the data set. This avoids the need for specifying non-nested hierarchies as linked tables.

Finally, for illustration purposes, we see that the same function calls work with microdata as input:

GaussSuppressionFromData(data = microdata,
                         dimVar = c("region", "county", "size"),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      region freq primary suppressed
#> 1       BIG  228   FALSE      FALSE
#> 2     Total  338   FALSE      FALSE
#> 3  county-1  118   FALSE      FALSE
#> 4  county-2  124   FALSE      FALSE
#> 5  county-3   96   FALSE      FALSE
#> 6     small  110   FALSE      FALSE
#> 7         A  104   FALSE      FALSE
#> 8         B   51   FALSE      FALSE
#> 9         C   73   FALSE      FALSE
#> 10        D   14   FALSE      FALSE
#> 11        E   61   FALSE      FALSE
#> 12        F   35   FALSE      FALSE

This output is the same as illustrated in Table 5 above.

Creating tables using `hierarchies`

The hierarchies parameter allows the explicit specification of which hierarchies should be used when creating the output table. This allows for a more fine-grained approach as opposed to simply using dimVar, as it allows for applying hierarchies not already present in the data set. Hierarchies can be provided in many ways. In this vignette, we will exemplify the following three forms: as a dimlist (as defined in sdcTable), using the hrc format from TauArgus, and finally with a more general hierarchy specification (internally, not surprisingly, simply called hierarchy). Any of these can be provided to the hierarchies parameter, as they are all translated to the internal hierarchy representation. For the purposes of this vignette, we will use dimlists, however in the following example we shall see how these can be translated to one another using functions from SSBtools. Let us begin by defining two hierarchies by using dimlists:

region_dim <- data.frame(levels = c("@", "@@", rep("@@@", 2), rep("@@", 4)),
                         codes = c("Total", "AB", LETTERS[1:6]))
region_dim
#>   levels codes
#> 1      @ Total
#> 2     @@    AB
#> 3    @@@     A
#> 4    @@@     B
#> 5     @@     C
#> 6     @@     D
#> 7     @@     E
#> 8     @@     F

income_dim <- data.frame(levels = c("@", "@@", "@@", "@@@", "@@@", "@@@"),
                         codes = c("Total", "wages", "not_wages", "other", "assistance", "pensions"))
income_dim
#>   levels      codes
#> 1      @      Total
#> 2     @@      wages
#> 3     @@  not_wages
#> 4    @@@      other
#> 5    @@@ assistance
#> 6    @@@   pensions
SSBtools::DimList2Hrc(income_dim)
#> [1] "wages"       "not_wages"   "@other"      "@assistance" "@pensions"
SSBtools::DimList2Hierarchy(income_dim)
#>     mapsFrom    mapsTo sign level
#> 1      wages     Total    1     2
#> 2  not_wages     Total    1     2
#> 3      other not_wages    1     1
#> 4 assistance not_wages    1     1
#> 5   pensions not_wages    1     1

We can use these hierarchies to specify our output table. We do this by supplying a named list to the hierarchies parameter, where the list names correspond to variables in the data, and the list elements correspond to hierarchies we wish to include.

GaussSuppressionFromData(data = dataset,
                         hierarchies = list(region = region_dim, main_income = income_dim),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>    region main_income freq primary suppressed
#> 1   Total       Total  338   FALSE      FALSE
#> 2   Total   not_wages  316   FALSE      FALSE
#> 3   Total  assistance  178   FALSE      FALSE
#> 4   Total       other   26   FALSE      FALSE
#> 5   Total    pensions  112   FALSE      FALSE
#> 6   Total       wages   22   FALSE      FALSE
#> 7      AB       Total  155   FALSE      FALSE
#> 8      AB   not_wages  143   FALSE      FALSE
#> 9      AB  assistance   84   FALSE      FALSE
#> 10     AB       other    5   FALSE      FALSE
#> 11     AB    pensions   54   FALSE      FALSE
#> 12     AB       wages   12   FALSE      FALSE
#> 13      A       Total  104   FALSE      FALSE
#> 14      A   not_wages   93   FALSE      FALSE
#> 15      A  assistance   55   FALSE      FALSE
#> 16      A       other    2   FALSE      FALSE
#> 17      A    pensions   36   FALSE      FALSE
#> 18      A       wages   11   FALSE      FALSE
#> 19      B       Total   51   FALSE      FALSE
#> 20      B   not_wages   50   FALSE      FALSE
#> 21      B  assistance   29   FALSE      FALSE
#> 22      B       other    3   FALSE      FALSE
#> 23      B    pensions   18   FALSE      FALSE
#> 24      B       wages    1   FALSE      FALSE
#> 25      C       Total   73   FALSE      FALSE
#> 26      C   not_wages   65   FALSE      FALSE
#> 27      C  assistance   35   FALSE      FALSE
#> 28      C       other    5   FALSE      FALSE
#> 29      C    pensions   25   FALSE      FALSE
#> 30      C       wages    8   FALSE      FALSE
#> 31      D       Total   14   FALSE      FALSE
#> 32      D   not_wages   14   FALSE      FALSE
#> 33      D  assistance    9   FALSE      FALSE
#> 34      D       other    3   FALSE      FALSE
#> 35      D    pensions    2   FALSE      FALSE
#> 36      D       wages    0   FALSE      FALSE
#> 37      E       Total   61   FALSE      FALSE
#> 38      E   not_wages   61   FALSE      FALSE
#> 39      E  assistance   32   FALSE      FALSE
#> 40      E       other    9   FALSE      FALSE
#> 41      E    pensions   20   FALSE      FALSE
#> 42      E       wages    0   FALSE      FALSE
#> 43      F       Total   35   FALSE      FALSE
#> 44      F   not_wages   33   FALSE      FALSE
#> 45      F  assistance   18   FALSE      FALSE
#> 46      F       other    4   FALSE      FALSE
#> 47      F    pensions   11   FALSE      FALSE
#> 48      F       wages    2   FALSE      FALSE

Table 7: hierarchies = list(region = region_dim, main_income = income_dim)

region	other	wages	assistance	pensions	not_wages	Total
A	2	11	55	36	93	104
B	3	1	29	18	50	51
C	5	8	35	25	65	73
D	3	0	9	2	14	14
E	9	0	32	20	61	61
F	4	2	18	11	33	35
AB	5	12	84	54	143	155
Total	26	22	178	112	316	338

As mentioned previously, the GaussSuppression package supports non-nested hierarchies natively. We achieve this by having multiple elements with the same name in the hierarchies list:

region2_dim <- data.frame(levels = c("@", rep(c("@@", rep("@@@", 2)), 2), rep("@@", 2)),
                          codes = c("Total", "AD", "A", "D",  
                                    "BF", "B", "F", 
                                    "C", "E"))
region2_dim
#>   levels codes
#> 1      @ Total
#> 2     @@    AD
#> 3    @@@     A
#> 4    @@@     D
#> 5     @@    BF
#> 6    @@@     B
#> 7    @@@     F
#> 8     @@     C
#> 9     @@     E

GaussSuppressionFromData(data = dataset,
                         hierarchies = list(region = region_dim, region = region2_dim),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>    region freq primary suppressed
#> 1      AB  155   FALSE      FALSE
#> 2      AD  118   FALSE      FALSE
#> 3      BF   86   FALSE      FALSE
#> 4   Total  338   FALSE      FALSE
#> 5       A  104   FALSE      FALSE
#> 6       B   51   FALSE      FALSE
#> 7       C   73   FALSE      FALSE
#> 8       D   14   FALSE      FALSE
#> 9       E   61   FALSE      FALSE
#> 10      F   35   FALSE      FALSE

Table 8: hierarchies = list(region = region_dim, region = region2_dim)

region
A	104
B	51
C	73
D	14
E	61
F	35
AB	155
AD	118
BF	86
Total	338

Finally, as before, all of this functionality works with microdata as input as well.

GaussSuppressionFromData(data = microdata,
                         hierarchies = list(region = region_dim, region = region2_dim),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>    region freq primary suppressed
#> 1      AB  155   FALSE      FALSE
#> 2      AD  118   FALSE      FALSE
#> 3      BF   86   FALSE      FALSE
#> 4   Total  338   FALSE      FALSE
#> 5       A  104   FALSE      FALSE
#> 6       B   51   FALSE      FALSE
#> 7       C   73   FALSE      FALSE
#> 8       D   14   FALSE      FALSE
#> 9       E   61   FALSE      FALSE
#> 10      F   35   FALSE      FALSE

Creating tables using `formula`

The most flexible method for specifying the output of GaussSuppression is by using the formula interface. This makes use of model formulas in R, and provides a powerful way of specifying multiple different tables. Indeed, all of the above examples—and much more—can be replicated using the formula interface. The formula’s predictor variables must be variable names occuring in the data set (the dependent variable is ignored, and thus we leave it empty). In the following, we create a table based on the region and county variables. As before, the hierarchical relationship between these variables is detected automatically:

GaussSuppressionFromData(data = microdata,
                         formula = ~ region + county,
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      region freq primary suppressed
#> 1     Total  338   FALSE      FALSE
#> 2         A  104   FALSE      FALSE
#> 3         B   51   FALSE      FALSE
#> 4         C   73   FALSE      FALSE
#> 5         D   14   FALSE      FALSE
#> 6         E   61   FALSE      FALSE
#> 7         F   35   FALSE      FALSE
#> 8  county-1  118   FALSE      FALSE
#> 9  county-2  124   FALSE      FALSE
#> 10 county-3   96   FALSE      FALSE

Table 9: formula = ~ region + county

region
A	104
B	51
C	73
D	14
E	61
F	35
county-1	118
county-2	124
county-3	96
Total	338

If there is no hierarchical relationship between variables, multiplication in the formula and specification in dimVar yield the same results.


GaussSuppressionFromData(data = microdata,
                         formula = ~ county * main_income,
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      county main_income freq primary suppressed
#> 1     Total       Total  338   FALSE      FALSE
#> 2  county-1       Total  118   FALSE      FALSE
#> 3  county-2       Total  124   FALSE      FALSE
#> 4  county-3       Total   96   FALSE      FALSE
#> 5     Total  assistance  178   FALSE      FALSE
#> 6     Total       other   26   FALSE      FALSE
#> 7     Total    pensions  112   FALSE      FALSE
#> 8     Total       wages   22   FALSE      FALSE
#> 9  county-1  assistance   64   FALSE      FALSE
#> 10 county-1       other    5   FALSE      FALSE
#> 11 county-1    pensions   38   FALSE      FALSE
#> 12 county-1       wages   11   FALSE      FALSE
#> 13 county-2  assistance   64   FALSE      FALSE
#> 14 county-2       other    8   FALSE      FALSE
#> 15 county-2    pensions   43   FALSE      FALSE
#> 16 county-2       wages    9   FALSE      FALSE
#> 17 county-3  assistance   50   FALSE      FALSE
#> 18 county-3       other   13   FALSE      FALSE
#> 19 county-3    pensions   31   FALSE      FALSE
#> 20 county-3       wages    2   FALSE      FALSE
  GaussSuppressionFromData(data = microdata,
                         dimVar = c("county" , "main_income"),
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      county main_income freq primary suppressed
#> 1     Total       Total  338   FALSE      FALSE
#> 2     Total  assistance  178   FALSE      FALSE
#> 3     Total       other   26   FALSE      FALSE
#> 4     Total    pensions  112   FALSE      FALSE
#> 5     Total       wages   22   FALSE      FALSE
#> 6  county-1       Total  118   FALSE      FALSE
#> 7  county-1  assistance   64   FALSE      FALSE
#> 8  county-1       other    5   FALSE      FALSE
#> 9  county-1    pensions   38   FALSE      FALSE
#> 10 county-1       wages   11   FALSE      FALSE
#> 11 county-2       Total  124   FALSE      FALSE
#> 12 county-2  assistance   64   FALSE      FALSE
#> 13 county-2       other    8   FALSE      FALSE
#> 14 county-2    pensions   43   FALSE      FALSE
#> 15 county-2       wages    9   FALSE      FALSE
#> 16 county-3       Total   96   FALSE      FALSE
#> 17 county-3  assistance   50   FALSE      FALSE
#> 18 county-3       other   13   FALSE      FALSE
#> 19 county-3    pensions   31   FALSE      FALSE
#> 20 county-3       wages    2   FALSE      FALSE

Table 10: formula = ~ county * main_income or dimVar = c("county" , "main_income")

county	other	wages	assistance	pensions	Total
county-1	5	11	64	38	118
county-2	8	9	64	43	124
county-3	13	2	50	31	96
Total	26	22	178	112	338

However, formula lets us specify different shapes for our tables. For example, if we are only interested in marginal values, we can supply this with the use of the addition operator:


GaussSuppressionFromData(data = microdata,
                         formula = ~ county + main_income,
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>     county main_income freq primary suppressed
#> 1    Total       Total  338   FALSE      FALSE
#> 2 county-1       Total  118   FALSE      FALSE
#> 3 county-2       Total  124   FALSE      FALSE
#> 4 county-3       Total   96   FALSE      FALSE
#> 5    Total  assistance  178   FALSE      FALSE
#> 6    Total       other   26   FALSE      FALSE
#> 7    Total    pensions  112   FALSE      FALSE
#> 8    Total       wages   22   FALSE      FALSE

The same output is shown below as a formatted and reshaped table where empty cells means cells not included in the output.

Table 11: formula = ~ county + main_income

county	other	wages	assistance	pensions	Total
county-1					118
county-2					124
county-3					96
Total	26	22	178	112	338

This example demonstrates, in fact, the ability of specifying multiple linked tables: a one-dimensional table for county linked with a one-dimensional table for main_income. Similarly, we can use the colon (“:”) operator to omit row and column marginals:

GaussSuppressionFromData(data = microdata,
                         formula = ~ county:main_income,
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      county main_income freq primary suppressed
#> 1     Total       Total  338   FALSE      FALSE
#> 2  county-1  assistance   64   FALSE      FALSE
#> 3  county-1       other    5   FALSE      FALSE
#> 4  county-1    pensions   38   FALSE      FALSE
#> 5  county-1       wages   11   FALSE      FALSE
#> 6  county-2  assistance   64   FALSE      FALSE
#> 7  county-2       other    8   FALSE      FALSE
#> 8  county-2    pensions   43   FALSE      FALSE
#> 9  county-2       wages    9   FALSE      FALSE
#> 10 county-3  assistance   50   FALSE      FALSE
#> 11 county-3       other   13   FALSE      FALSE
#> 12 county-3    pensions   31   FALSE      FALSE
#> 13 county-3       wages    2   FALSE      FALSE

Table 12: formula = ~ county:main_income

county	other	wages	assistance	pensions	Total
county-1	5	11	64	38
county-2	8	9	64	43
county-3	13	2	50	31
Total					338

Using subtraction, we can omit marginals and other cells from the output. For example, the intercept (sum over all records) can be omitted by including - 1 in the formula, like this: formula = county : main_income - 1.

Using these features, we can define more complicated linked tables. To illustrate this, let us assume we wish to publish the following:

all levels of detail of main_income for all counties and sizes,
at the region level, we only wish to publish if the main source of income was “wages” or “not_wages”.

To do this, we begin by adding a column encoding whether the main source of income was “wages” or “not_wages”.

dataset$income2 <- ifelse(dataset$main_income == "wages", "wages", "not_wages")
microdata$income2 <- ifelse(microdata$main_income == "wages", "wages", "not_wages")
head(dataset)
#>   region   county  size main_income freq   income2
#> 1      A county-1   BIG       other    2 not_wages
#> 2      B county-2   BIG       other    3 not_wages
#> 3      C county-2   BIG       other    5 not_wages
#> 4      D county-1 small       other    3 not_wages
#> 5      E county-3 small       other    9 not_wages
#> 6      F county-3 small       other    4 not_wages

Then we can specify the desired output with the following formula:

GaussSuppressionFromData(data = dataset,
                         formula = ~ region * income2 + (county + size) * main_income,
                         freqVar = "freq",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      region main_income freq primary suppressed
#> 1     Total       Total  338   FALSE      FALSE
#> 2         A       Total  104   FALSE      FALSE
#> 3         B       Total   51   FALSE      FALSE
#> 4         C       Total   73   FALSE      FALSE
#> 5         D       Total   14   FALSE      FALSE
#> 6         E       Total   61   FALSE      FALSE
#> 7         F       Total   35   FALSE      FALSE
#> 8     Total   not_wages  316   FALSE      FALSE
#> 9     Total       wages   22   FALSE      FALSE
#> 10 county-1       Total  118   FALSE      FALSE
#> 11 county-2       Total  124   FALSE      FALSE
#> 12 county-3       Total   96   FALSE      FALSE
#> 13      BIG       Total  228   FALSE      FALSE
#> 14    small       Total  110   FALSE      FALSE
#> 15    Total  assistance  178   FALSE      FALSE
#> 16    Total       other   26   FALSE      FALSE
#> 17    Total    pensions  112   FALSE      FALSE
#> 18    Total       wages   22   FALSE      FALSE
#> 19        A   not_wages   93   FALSE      FALSE
#> 20        A       wages   11   FALSE      FALSE
#> 21        B   not_wages   50   FALSE      FALSE
#> 22        B       wages    1   FALSE      FALSE
#> 23        C   not_wages   65   FALSE      FALSE
#> 24        C       wages    8   FALSE      FALSE
#> 25        D   not_wages   14   FALSE      FALSE
#> 26        D       wages    0   FALSE      FALSE
#> 27        E   not_wages   61   FALSE      FALSE
#> 28        E       wages    0   FALSE      FALSE
#> 29        F   not_wages   33   FALSE      FALSE
#> 30        F       wages    2   FALSE      FALSE
#> 31 county-1  assistance   64   FALSE      FALSE
#> 32 county-1       other    5   FALSE      FALSE
#> 33 county-1    pensions   38   FALSE      FALSE
#> 34 county-1       wages   11   FALSE      FALSE
#> 35 county-2  assistance   64   FALSE      FALSE
#> 36 county-2       other    8   FALSE      FALSE
#> 37 county-2    pensions   43   FALSE      FALSE
#> 38 county-2       wages    9   FALSE      FALSE
#> 39 county-3  assistance   50   FALSE      FALSE
#> 40 county-3       other   13   FALSE      FALSE
#> 41 county-3    pensions   31   FALSE      FALSE
#> 42 county-3       wages    2   FALSE      FALSE
#> 43      BIG  assistance  119   FALSE      FALSE
#> 44      BIG       other   10   FALSE      FALSE
#> 45      BIG    pensions   79   FALSE      FALSE
#> 46      BIG       wages   20   FALSE      FALSE
#> 47    small  assistance   59   FALSE      FALSE
#> 48    small       other   16   FALSE      FALSE
#> 49    small    pensions   33   FALSE      FALSE
#> 50    small       wages    2   FALSE      FALSE

Table 13: formula = ~ region * income2 + (county + size) * main_income

region	other	wages	assistance	pensions	not_wages	Total
A		11			93	104
B		1			50	51
C		8			65	73
D		0			14	14
E		0			61	61
F		2			33	35
county-1	5	11	64	38		118
county-2	8	9	64	43		124
county-3	13	2	50	31		96
small	16	2	59	33		110
BIG	10	20	119	79		228
Total	26	22	178	112	316	338

In this manner, we can specify multiple linked tables, each of which can use different non-nested hierarchies. This allows the suppression algorithm to protect all of these tables simultaneously (indeed, they are treated as a single table internally), avoiding the need for a stratified protection paradigm. Furthermore, the fine-grained specification of which cells are to be published allows the secondary suppression algorithm to protect with respect to precisely those cells that will be published. If row and column marginals are not published, for example, the suppression algorithm does not need to secondary suppress with respect to these marginals. See the other vignettes in this package for more details on setting up the protection methods.

Looking at the output data above Table 13, you will see that row 9 is duplicated on row 18. The reason is that the code wages is used both in the main_income variable and in the income2 variable. Currently, the formula interface does not do any special checking for this phenomenon. The recommended practice is to avoid such duplicate codes. When running FindDimLists, you will see that this function performs checking.

Tabulating continuous variables

In addition to defining the dimensions of the output tables, we need to decide whether they should be frequency tables (where we count contributing records) or magnititude tables (where we add contributing records’ numerical values for a given variable). All of the above examples have been frequency tables. However, the process is exactly the same if one wishes to construct magnititude tables; the only difference is that one must specify the numerical variable with the help of the parameter numVar.

Since most magnitude table suppression methods are based on comparing units’ contributions, the input data will most likely be supplied as microdata. Therefore, let us add a fake numerical variable to our microdata:

set.seed(12345)
microdata$num <- sample(0:1000, nrow(microdata), replace = TRUE)

Then in order to construct a volume table where records’ contributions to num are aggregated, we supply this as a parameter to GaussSuppressionFromData:

GaussSuppressionFromData(data = microdata,
                         formula = ~ region * income2 + (county + size) * main_income,
                         numVar = "num",
                         primary = FALSE,
                         protectZeros = FALSE)
#> [preAggregate 338*7->22*7]
#>      region main_income freq.1    num primary suppressed
#> 1     Total       Total    338 168843   FALSE      FALSE
#> 2         A       Total    104  50640   FALSE      FALSE
#> 3         B       Total     51  27386   FALSE      FALSE
#> 4         C       Total     73  35826   FALSE      FALSE
#> 5         D       Total     14   5730   FALSE      FALSE
#> 6         E       Total     61  30295   FALSE      FALSE
#> 7         F       Total     35  18966   FALSE      FALSE
#> 8     Total   not_wages    316 157199   FALSE      FALSE
#> 9     Total       wages     22  11644   FALSE      FALSE
#> 10 county-1       Total    118  56370   FALSE      FALSE
#> 11 county-2       Total    124  63212   FALSE      FALSE
#> 12 county-3       Total     96  49261   FALSE      FALSE
#> 13      BIG       Total    228 113852   FALSE      FALSE
#> 14    small       Total    110  54991   FALSE      FALSE
#> 15    Total  assistance    178  91989   FALSE      FALSE
#> 16    Total       other     26  13000   FALSE      FALSE
#> 17    Total    pensions    112  52210   FALSE      FALSE
#> 18    Total       wages     22  11644   FALSE      FALSE
#> 19        A   not_wages     93  45268   FALSE      FALSE
#> 20        A       wages     11   5372   FALSE      FALSE
#> 21        B   not_wages     50  26500   FALSE      FALSE
#> 22        B       wages      1    886   FALSE      FALSE
#> 23        C   not_wages     65  32111   FALSE      FALSE
#> 24        C       wages      8   3715   FALSE      FALSE
#> 25        D   not_wages     14   5730   FALSE      FALSE
#> 26        E   not_wages     61  30295   FALSE      FALSE
#> 27        F   not_wages     33  17295   FALSE      FALSE
#> 28        F       wages      2   1671   FALSE      FALSE
#> 29 county-1  assistance     64  33024   FALSE      FALSE
#> 30 county-1       other      5   1260   FALSE      FALSE
#> 31 county-1    pensions     38  16714   FALSE      FALSE
#> 32 county-1       wages     11   5372   FALSE      FALSE
#> 33 county-2  assistance     64  33424   FALSE      FALSE
#> 34 county-2       other      8   4696   FALSE      FALSE
#> 35 county-2    pensions     43  20491   FALSE      FALSE
#> 36 county-2       wages      9   4601   FALSE      FALSE
#> 37 county-3  assistance     50  25541   FALSE      FALSE
#> 38 county-3       other     13   7044   FALSE      FALSE
#> 39 county-3    pensions     31  15005   FALSE      FALSE
#> 40 county-3       wages      2   1671   FALSE      FALSE
#> 41      BIG  assistance    119  62407   FALSE      FALSE
#> 42      BIG       other     10   4887   FALSE      FALSE
#> 43      BIG    pensions     79  36585   FALSE      FALSE
#> 44      BIG       wages     20   9973   FALSE      FALSE
#> 45    small  assistance     59  29582   FALSE      FALSE
#> 46    small       other     16   8113   FALSE      FALSE
#> 47    small    pensions     33  15625   FALSE      FALSE
#> 48    small       wages      2   1671   FALSE      FALSE

**Table 14**: `formula = ~ region * income2 + (county + size) * main_income`
In each cell: `num` with frequencies in parenthesis.
region	other	wages	assistance	pensions	not_wages	Total
A		5372 ( 11)			45268 ( 93)	50640 (104)
B		886 ( 1)			26500 ( 50)	27386 ( 51)
C		3715 ( 8)			32111 ( 65)	35826 ( 73)
D					5730 ( 14)	5730 ( 14)
E					30295 ( 61)	30295 ( 61)
F		1671 ( 2)			17295 ( 33)	18966 ( 35)
county-1	1260 ( 5)	5372 ( 11)	33024 ( 64)	16714 ( 38)		56370 (118)
county-2	4696 ( 8)	4601 ( 9)	33424 ( 64)	20491 ( 43)		63212 (124)
county-3	7044 ( 13)	1671 ( 2)	25541 ( 50)	15005 ( 31)		49261 ( 96)
small	8113 ( 16)	1671 ( 2)	29582 ( 59)	15625 ( 33)		54991 (110)
BIG	4887 ( 10)	9973 ( 20)	62407 (119)	36585 ( 79)		113852 (228)
Total	13000 ( 26)	11644 ( 22)	91989 (178)	52210 (112)	157199 (316)	168843 (338)

Note that there are two empty cells in the wages column. This means that these cells are not included in the output data. One reason is that the removeEmpty parameter to SSBtools::ModelMatrix has TRUE as default in the case of a formula interface. By including removeEmpty = FALSE, zeros will be included in the output. Another way to achieve this is to use extend0 = TRUE. By this parameter, zeros are added to the input data after the automatic aggregation from microdata. As you will see in other vignettes in this package, the extend0 parameter can be important for suppression methods.

Note also that a new frequency variable is generated with the above call. If a frequency variable is already present in the input data, we can provide it in addition to numVar and the method will use that information instead:

GaussSuppressionFromData(data = microdata,
                         formula = ~ region * income2 + (county + size) * main_income,
                         freqVar = "freq",
                         numVar = "num",
                         primary = FALSE,
                         protectZeros = FALSE)
#>      region main_income freq    num primary suppressed
#> 1     Total       Total  338 168843   FALSE      FALSE
#> 2         A       Total  104  50640   FALSE      FALSE
#> 3         B       Total   51  27386   FALSE      FALSE
#> 4         C       Total   73  35826   FALSE      FALSE
#> 5         D       Total   14   5730   FALSE      FALSE
#> 6         E       Total   61  30295   FALSE      FALSE
#> 7         F       Total   35  18966   FALSE      FALSE
#> 8     Total   not_wages  316 157199   FALSE      FALSE
#> 9     Total       wages   22  11644   FALSE      FALSE
#> 10 county-1       Total  118  56370   FALSE      FALSE
#> 11 county-2       Total  124  63212   FALSE      FALSE
#> 12 county-3       Total   96  49261   FALSE      FALSE
#> 13      BIG       Total  228 113852   FALSE      FALSE
#> 14    small       Total  110  54991   FALSE      FALSE
#> 15    Total  assistance  178  91989   FALSE      FALSE
#> 16    Total       other   26  13000   FALSE      FALSE
#> 17    Total    pensions  112  52210   FALSE      FALSE
#> 18    Total       wages   22  11644   FALSE      FALSE
#> 19        A   not_wages   93  45268   FALSE      FALSE
#> 20        A       wages   11   5372   FALSE      FALSE
#> 21        B   not_wages   50  26500   FALSE      FALSE
#> 22        B       wages    1    886   FALSE      FALSE
#> 23        C   not_wages   65  32111   FALSE      FALSE
#> 24        C       wages    8   3715   FALSE      FALSE
#> 25        D   not_wages   14   5730   FALSE      FALSE
#> 26        E   not_wages   61  30295   FALSE      FALSE
#> 27        F   not_wages   33  17295   FALSE      FALSE
#> 28        F       wages    2   1671   FALSE      FALSE
#> 29 county-1  assistance   64  33024   FALSE      FALSE
#> 30 county-1       other    5   1260   FALSE      FALSE
#> 31 county-1    pensions   38  16714   FALSE      FALSE
#> 32 county-1       wages   11   5372   FALSE      FALSE
#> 33 county-2  assistance   64  33424   FALSE      FALSE
#> 34 county-2       other    8   4696   FALSE      FALSE
#> 35 county-2    pensions   43  20491   FALSE      FALSE
#> 36 county-2       wages    9   4601   FALSE      FALSE
#> 37 county-3  assistance   50  25541   FALSE      FALSE
#> 38 county-3       other   13   7044   FALSE      FALSE
#> 39 county-3    pensions   31  15005   FALSE      FALSE
#> 40 county-3       wages    2   1671   FALSE      FALSE
#> 41      BIG  assistance  119  62407   FALSE      FALSE
#> 42      BIG       other   10   4887   FALSE      FALSE
#> 43      BIG    pensions   79  36585   FALSE      FALSE
#> 44      BIG       wages   20   9973   FALSE      FALSE
#> 45    small  assistance   59  29582   FALSE      FALSE
#> 46    small       other   16   8113   FALSE      FALSE
#> 47    small    pensions   33  15625   FALSE      FALSE
#> 48    small       wages    2   1671   FALSE      FALSE