ElevDistr
Getting started
The package ElevDistr can be installed via CRAN or from GitHub using
the package devtools.
Stable version from CRAN:
Developmental from GitHub:
Process a single data point
Computing the distance to the treeline for a single point is the
easiest task. Except for climatic layers and the elevation model,
ElevDistr contains everything needed for this task. First of all, it is
essential that two climatic raster are imported: one for growing season
length (gsl) and one for growing season temperature (gst). I suggest to
use the layers from CHELSA.
The user is free to use different climatic layers, but it is highly
recommended to customize the object pointsAboveTreeline
when using layers other than the CHELSA raster (see below). The
algorithm does not fail if this adjustment is not made, but it is very
likely to have a negative impact on computation time.
gstURL <- paste0("https://os.zhdk.cloud.switch.ch/chelsav2/GLOBAL/",
"climatologies/1981-2010/bio/CHELSA_gst_1981-2010_V.2.1.tif")
gslURL <- paste0("https://os.zhdk.cloud.switch.ch/chelsav2/GLOBAL/",
"climatologies/1981-2010/bio/CHELSA_gsl_1981-2010_V.2.1.tif")
gst <- terra::rast(gstURL, vsi = TRUE)
gsl <- terra::rast(gslURL, vsi = TRUE)Furthermore, a digital elevation model (DEM) needs to be imported. I selected a part of the GMTED2010 model, which is provided by the U.S. Geological Survey. Importing the layer works the same way as with the climatic raster above.
gmted2010URL <- paste0("https://edcintl.cr.usgs.gov/downloads/sciweb1/shared/topo/downloads/GMTED/",
"Global_tiles_GMTED/300darcsec/med/E000/30N000E_20101117_gmted_med300.tif")
gmted2010Part <- terra::rast(gmted2010URL, vsi = TRUE)The only thing that needs to be done now is to call the wrapper and
specify the longitude, latitude, and elevation of the point of
interest.
Note: All coordinates need to be in World Geodetic System 1984
(‘WGS-84’).
distance_to_treeline(lon = 8.65, lat = 46.87, gstRaster = gst, gslRaster = gsl,
elevationRaster = gmted2010Part, elevation = 504, pointDf = pointsAboveTreeline,
plot = FALSE, plotHist = FALSE, gstMin = 6.4, gslMin = 94)If using only a few points, the user should plot a map and a
histogram of the local treeline height. This can be achieved by changing
the default parameters: plot = TRUE for the map and
plotHist = TRUE for the histogram.
Please note that you need to register a Google API in order to produce a
map. A detailed explanation can be found here: Register
a Google API. You can check if you have an already registered key
with ggmap::has_google_key(), and use the command
ggmap::ggmap_show_api_key() to allow the wrapper to
download the map of interest.
Furthermore, although it is possible to change the treeline definition by adjusting the thresholds for minimal growing season length and growing season temperature, this option should only be modified if you know what you are doing. Changed thresholds significantly impact the computational output and are carefully selected based on Paulsen and Körner (2014) https://doi.org/10.1007/s00035-014-0124-0.
Process GBIF data
After explaining the basics of the wrapper function
distance_to_treeline, I will now show an example of how to
calculate entire species distribution based on GBIF data. This chapter
gives the user an overview of how this R package could be used to
process bigger data frames.
Remember that just because this tool is specially
designed to handle the uncertainty of spatial data, it does not mean
that this approach is a one-size-fits-all solution. Depending on your
question you might want to change the approach.
Download data
First, we need to access GBIF data for processing. As an example, I
will download records of two species from GBIF: Ranunculus
pygmaeus and Ranunculus thora. The data can be imported
directly from a CSV file or using the package rgbif. Here the
fully automatically approach with rgbif is demonstrated.
However, if you are looking for many data points, you may hit the hard
limit of 100,000 occurrences. In such a case downloading the csv file
from the GBIF homepage becomes
necessary.
#install.packages("rgbif") #Remove hashtag if you have not installed this package
myspecies <- c("Ranunculus pygmaeus", "Ranunculus thora")
gbifData <- rgbif::occ_data(scientificName = myspecies, hasCoordinate = TRUE, limit = 20000)To keep the example simple, I will only store the variables of interest: species name, longitude, latitude, elevation and the taxon rank.
Filter data
Now we are ready to process the downloaded data frame. Here it is
only presented how to exclude species with no meaningful elevation.
However, depending on your data and your question this very basic
filtering might not be sufficient. I recommend to check out the package
CoordinateCleaner
and think properly of what kind of potential bias you must exclude from
your data set.
Here I exclude all data points that are below 0 meters or above 8,850
meters above the sea level or contain a NA. This is
achieved using the Tidyverse
package.
#install.packages("tidyverse") #Remove hashtag if you have not installed this package
library("tidyverse")
ranunculusFiltered <- ranunculus %>% filter(!is.na(elevation) & 0 < elevation & elevation < 8850)Furthermore, I will only keep entries that have an assigned taxon of “species”.
Down sampling
To speed up the computation, only 100 random samples are retained. The user might choose a different approach depending on the performed filtering and the desired output accuracy.
Compute distance to the treeline
Now the distance to the closest local treeline can be computed. The computation works similarly to what was explained above with a single data point, with the difference that vectors for longitude, latitude, and elevation are used as input.
#Import climatic layers
gstURL <- paste0("https://os.zhdk.cloud.switch.ch/chelsav2/GLOBAL/",
"climatologies/1981-2010/bio/CHELSA_gst_1981-2010_V.2.1.tif")
gslURL <- paste0("https://os.zhdk.cloud.switch.ch/chelsav2/GLOBAL/",
"climatologies/1981-2010/bio/CHELSA_gsl_1981-2010_V.2.1.tif")
gst <- terra::rast(gstURL, vsi = TRUE)
gsl <- terra::rast(gslURL, vsi = TRUE)
#Import the DEM
gmted2010URL2 <- paste0("https://edcintl.cr.usgs.gov/downloads/sciweb1/shared/topo/downloads/GMTED/",
"Global_tiles_GMTED/300darcsec/med/E000/50N000E_20101117_gmted_med300.tif")
gmted2010Part2 <- terra::rast(gmted2010URL2, vsi = TRUE)
#Run classification for the first five elements
elev <- distance_to_treeline(lon = ranunculusSampled$decimalLongitude[1:5],
lat = ranunculusSampled$decimalLatitude[1:5], gstRaster = gst,
gslRaster = gsl, elevationRaster = gmted2010Part2, pointDf = pointsAboveTreeline,
elevation = ranunculusSampled$elevation[1:5], plot = FALSE,
plotHist = FALSE, gstMin = 6.4, gslMin = 94)
#> | | | 0% | |============ | 20%
#> Warning in distance_to_treeline(lon = ranunculusSampled$decimalLongitude[1:5],
#> : The "gridSize" parameter was to small. The parameter was automatically
#> increased by 15 km.
#> | |======================== | 40% | |==================================== | 60%
#> Warning in distance_to_treeline(lon = ranunculusSampled$decimalLongitude[1:5],
#> : The "gridSize" was increased 5 times, to avoid an endlose loop we stop here.
#> Consider to exclude this point it might not be representative.
#> Warning in distance_to_treeline(lon = ranunculusSampled$decimalLongitude[1:5],
#> : The "gridSize" parameter was to small. The parameter was automatically
#> increased by 30 km.
#> Warning in distance_to_treeline(lon = ranunculusSampled$decimalLongitude[1:5],
#> : No treeline was found within the defined gridd. Therfore, the result is "NA".
#> Consider retying with a larger gird size.
#> | |================================================ | 80% | |============================================================| 100%Be aware that the computation time for each point is roughly three
seconds, the time increases linear with the amount of input points;
O(n). Filtering and
parallelization are suitable methods for reducing the computation
time.
The result stored in elev are the computed distances to the
closest local treeline.
The function distance_to_treeline returns an
NA if the required number of samples (specified by the
input value treelineSamplingSize; default value of 10) is
not reached, even with an increased search radius, or if the DEM does
not cover the area of interest (as is the case in
elev[1]).
Increase the speed
The way the three raster are loaded in this tutorial, is not optimized for speed. If you would like to increase the speed it is recommended to download the layers from CHELSA:
and the U.S. Geological Survey:
- GMTED2010 (select the suitable tile and resolution, e.g.: Median - 30 arc-sec)
If a digital elevation model of the whole globe is needed the GTOPO30.tif file can be downloaded from my Google Drive. GTOPO30 is also courtesy of the U.S. Geological Survey. All the raster can be imported by customizing:
How to customize “pointsAboveTreeline”
As stated in the first paragraph, users can use different climate
raster than those presented in the tutorial. However, to keep
computation time low, it is recommended to recalculate the
pointsAboveTreeline data frame.
After importing the climate raster of your choice, you can use the
generate_point_df function to identify all points above the
treeline.
#Import raster of your choice
gst <- terra::rast(file = "your_gst_layer.tif")
gsl <- terra::rast(file = "your_gsl_layer.tif")
#Compute new data frame
newPointsAboveTreeline <- generate_point_df(gstRaster = gst, gslRaster = gsl, stepSize = 0.0416666,
gstTreshold = 6.4, gslTreshold = 94)
#Save the output
save(newPointsAboveTreeline, file = "newPointsAboveTreeline.Rdata")The computation takes some time, but it only needs to be executed once.
It is probably relevant to exclude all the points that are that are
outside of the mountain polygons GMBA.
This was done for the pointsAboveTreeline data frame. To do
so, download the folder from the link above and follow these steps:
#Load the polygons of all the mountains (from the GMBA project)
mountain_polygons <- terra::vect("GMBA mountain inventory V1.2(entire world)/
GMBA Mountain Inventory_v1.2-World.shp")
#Keep only the points that are in a alpine polygon
#"keep" will be a vector containing all row numbers that contain coordinate, which lie in the Alps
keep <- terra::is.related(terra::vect(newPointsAboveTreeline, geom = c("longitude", "latitude")),
mountain_polygons, "intersects") |> which()
newPointsAboveTreeline2 <- newPointsAboveTreeline [keep,] #Pick the lines of interestHow the wrapper works
In case users are interested in how the algorithm works, this
paragraph explains what happens behind the scenes. For simplicity, it is
explained using the same data as in the first paragraph.
First, the wrapper searches for the closest point above the treeline in
the pointsAboveTreeline data frame (or what ever the user
feeds into the wrapper). For the search, a k-dimensional tree and a
nearest neighbour approach are used by calling the
get_nearest_point function from the package RANN. It is important
to find a point close to the treeline because both alpine and non-alpine
points are needed in the following steps.
pointAbove <- get_nearest_point(lon = 8.65, lat = 46.87, pointDf = pointsAboveTreeline)
pointAbove
#> $lon
#> [1] 8.728898
#>
#> $lat
#> [1] 46.93756After getting a point that lies above the treeline, a grid is generated with the extracted point as grid center. The width (in km) and the distance between the points (in degrees) are defined by the input arguments.
grid <- generate_grid(lon = pointAbove$lon, lat = pointAbove$lat, squareSize = 10, stepSize = 0.0025)
head(grid$df)
#> longitude latitude
#> 1 8.663898 46.89251
#> 2 8.663898 46.89501
#> 3 8.663898 46.89751
#> 4 8.663898 46.90001
#> 5 8.663898 46.90251
#> 6 8.663898 46.90501Now for each grid point the growing season length and growing season
temperature are extracted. Based on the selected input thresholds, it is
determined whether the point is above or below the treeline. The
extracted information is added to the data frame from the
generate_grid function output.
grid$df <- classify_above_treeline(coords = grid$df, gstRaster = gst, gslRaster = gsl,
gstTreshold = 6.4, gslTreshold = 94)
head(grid$df)
#> longitude latitude growingSeasonTemperature growingSeasonLength aboveTreeline
#> 1 8.663898 46.89251 8.95 133 FALSE
#> 2 8.663898 46.89501 8.95 133 FALSE
#> 3 8.663898 46.89751 8.95 133 FALSE
#> 4 8.663898 46.90001 8.95 135 FALSE
#> 5 8.663898 46.90251 8.95 135 FALSE
#> 6 8.663898 46.90501 8.95 135 FALSEBased on this classification, the treeline is drawn, if two points
with a different classification lie next to each other, a vertical or
horizontal line is drawn between the points and NA values
are ignored. The lines are stored in a data frame with the following
information: an identifier, a start latitude and longitude, and an end
latitude and longitude.
treelineDf <- sample_treeline(df = grid$df, lonLength = grid$lonLength, latLength = grid$latLength)
head(treelineDf)
#> id lat1 lon1 lat2 lon2
#> 2 horizontal195 46.91626 8.675148 46.91626 8.677648
#> 3 horizontal198 46.92376 8.675148 46.92376 8.677648
#> 4 horizontal232 46.91626 8.677648 46.91626 8.680148
#> 5 horizontal235 46.92376 8.677648 46.92376 8.680148
#> 6 horizontal269 46.91626 8.680148 46.91626 8.682648
#> 7 horizontal272 46.92376 8.680148 46.92376 8.682648After this step, the wrapper contains a safety feature: whenever
there are fewer than ten treeline elements, the last three functions are
recalculated with a bigger grid (+5 km). It is implemented in case only
a few trellises are found, which indicates potential problems and might
increase uncertainty.
After this safety loop the plot argument is evaluated. If
it is = TRUE a map is generated by calling the function
plot_distr.
In the final step, the treeline is sampled with a step size defined
in the input argument. From all the drawn points, the elevation is
extracted from the elevationRaster (containing a digital
elevation model). Of all extracted elevations, the median is calculated
and subtracted from the pointElevation input to estimate
the relative distance to the local treeline. This function is capable of
plotting a histogram of the extracted elevation points, including the
median.
calculate_distance(treeline = treelineDf, elevationRaster = gmted2010Part, pointElevation = 504,
treelineSampling = 10, plot = FALSE)
#> [1] -1491If desired, all the functions can be called independently of the wrapper.